Buscar en el registro

Employee picked up a bag containing training materials and felt a twist in her back which didn't present pain at the time of the incident. The next she day wasn't sure if the pain was from cramps or kidney. She did not seek medical attention until June 19, 2011 and she reported the back pain issue to her immediate supervisor on June 20, 2011

Employee was moving stabilizer from pipe truck to drill utilizing the winch on the drill. Employee had hold of stabilizer, and the momentum of the tool forced him into the rig, causing him to hit his fingers on the hammer that was stationary in the rod table.

EE was working on the 1800 screening plant when he removed a rock from the tail pulley. The belt rolled back and caught his left hand in the pulley. He then used his right hand to push another employee out of the way, straining his right shoulder. EE started receiving physical therapy on his right shoulder 07/28/2010. Turning this into a medical treatment.

Employee was unloading scrap metal out of a 10 wheel truck. The metal stuck to tailgate as it was being unloaded. Employee lowered the truck's bed and went to loosen the tailgate to release the stuck material. The tailgate released and pinned the employee's left arm between the tailgate and bed of the truck, breaking his left arm.

EMPLOYEE WAS TRYING TO REMOVE A 3FT 2X4 BRACE FROM A WALL WHEN HE PULLED THE BRACE TOWARDS HIM IT HIT HIM ON THE UPPER LIP

EMPLOYEE LIFTED THE LID ON THE #1 PULVERIZER AND IT DROPPED DOWNON THE COUNTERTOP.HE PULLED HIS HAND FROM BENEATH THE LID AND THE SHARP EDGE THE LID CUT HIS SMALL FINGER ON RIGHT HAND.

EMPLOYEE WAS STRETCHING A 3/4" CABLE FOR A 50 TON CRANE. THE SIDEWAYS MOVEMENT OF THE CABLE HIT HIM ABOVE THE KNEES CAUSING HIM TO HIT THE GROUND.

UNLOADING TRANS JACK SAT JACK DOWN, SCISSOR PART CAME DOWN CAUGHT PINKY FINGER BETWEEN BASE OF JACK

EMPLOYEE WAS CLIMBING DOWN A LADDER WHEN HE FELT A SHAPR PAIN IN HIS LEFT KNEE.

WHEN LOADING TIRES. EMPLOYEE PICKED UP TIRE AND TURNED TO PUT IT INTO TRUCK AND FELT PAIN IN BACK.

EMPLOYEE WAS TRYING TO MOVE A BARREL CLOSER TO BARREL STAND BY PULLING IT TOWARDS HIM WHEN HE TWISTED HIS LEFT KNEE HE DID NOT FEEL ANY PAIN AT THE TIME

EMPLOYEE HAD REMOVED BLADDER THAT INDICTES FUEL LEVEL AND PLACEC IT ON TOP OF FUEL TANK. HE STARTED DOWN LADDER AND HIS FOOT GOT TNAGLED IN BLADDER CHAIN PULLING THE BLADDER ON TOP OF HIS HEA D.

DRILLER WAS SWINGING BUCKET UP ON RIG. INJURED PERSON (HELPER) WALKED BEHIND HIM AND WAS STRUCK IN THE FACE KNOCKING FRONT TEETH LOOSE. TOOTH #8 LOOSENED.

STATED THAT SHE WAS LIFTING SIDE GATE ON WATER TRUCK WHEN SHE FELT A PAIN IN HER RT SIDE OF BACK

EMPLOYEE WAS SHOVELING DIRT WHEN SHE FELT PAIN IN HER LEFT SHOULDER

A LINER FELL ON3THE EMPLOYEE'S LEFT FINGER.

THE EMPLOYEE WA8 PUTTING GRATING IN A BOX AND CUT HIS RIGHT THUMB

THE EMPLOYEE WA8 CHANGING OUT A BEARING ON A PULLEY AND CAUGHT HISRIGHT HAND BETWEEN THE PILLOW SHAFT AND PULLEY BLOCK.

EMLOYEE CUT HIS3MIDDLE FINGER WHILE WORKING ON A PUMP

EMPL WORKING IN3HEAVY DUTY TRUCK SHOP,15 LB GEAR FELL ON LEFT HAND CAUSING INJURY.

EMPLOYEE WAS CA9RYING A 6 FT FLANGE WHEN HE SET IT DOWN HE FELT SLIGHT PAIN IN LOWER BACK DID NOT REPORT INJURY NOR SEK MEDICAL ATTENTION UNTIL 4 28 86 WORKED 4 29 86 LOST TIME FROM WORK 4 30 5 1 AND 5 2 3

EMPLOYEE WAS TI4ING THE CLARK FORKLIFT WHEN THE TIMING LIGHT WAS HIT BY THE FAN, CAUSING THE TIMING LIGHT TO STRIKE HIM ON THE RIGHT SIDE OF THE MOUTH.

I.NAME WS GUIDING H CARS ONTO A SIDE SWITCH AND STRAINED HIS BACK (MAN FINISHED SHIFT FRIDAY AND WORKED MONDAY AUGUST 26, 1985 - REPORTED OFF TUESDAY AUGUST 27).

THE EMPLOYEE WAS REMOVING BOLTS ON A FLANGE WHEN HE SUDDENLY SMASHED HIS LEFT THUMB.

I.NAME & I.NAME WERE INSTALLING A BUSING ON THE DIPPER ARM OF A FRONT END LOADER USING A HYDRAULIC PUMP. THE PUMP WAS IMPROPERLY PLACED AND WHEN PRESSURE WAS APPLIED IT POPPED OUT STIKING HIM LEFT UPPER ARM

THE EMPLOYEE WAS REMOVING A FLNAGE, FLANGE SLIPPED PINNING HIS RIGHT MIDDLE FINGER.

RIGHT FOOT FELL IN A BUCKET OF CRESYLIC ACID AND SPLASHED UP TO LEFT FOREARM.

EMPLOYEE WAS LIFTING A PIPE THAT SLIPPED CAUSING A SUDDEN JERK. THIS REAULTED IN A PINCHED NERVE TO THE EMPLOYEE\S NECK.

THIS EMPLOYEE WAS HOELPING TO INSTALL A GEAR ON A TRIPPERCAR DRIVE WHEEL WHEN ONE OF THE SHARP FLANGES CUT THROUGH HIS GLVE AND LACERATED HIS LEFT MIDDLE FINGER.

EMPLOYEE WAS WORKING IN A CONVEYOR UPTAKE AND A FOREIGN PARTICLE(S) BECAME EMBEDDED IN HIS EYE.

EMP WAS WORKING IN AN AREA WHICH HAS AN EXCESSIVE AMOUNT OF DUST AND DRBRIS. WHILE WORKING IN THIS AREA A FOREIGN PARTICLE BECAME EMBEDDED IN HIS RIGHT EYE

EMP WAS PLACING JACKHAMMER ON THE GROUND WHEN HAMMER FELL ON ITS SIDE HAMMER HANDLE HIT EMP CAUSING LOSS OF HIS FRONT TOOTH

EMPLOYEE WAS WORKING IN AN EXTREMELY DUSTY AREA AND RECEIVED EMBEDDED FOREIGN PARTICLES IN HIS LEFT EYE

EMPLOYEE WAS WALKING ACROSS A CATWALK WHILE ANOTHER EMPLOYEE WAS CLEANING A BEAM THE AREA HAD DIRT PARTICLES SCATTERED AND A FOREIGN PARTICLES EMBEDDED IN THE EMPLOYEE EYE

EMPLOYEE WAS CLEANING ON AN EXPANSION JOINT COVER AND ACID DUST PARTICLES BECAMEEMBEDDED IN HIS RIGHT EYE.

EMPLOYEE WAS WORKING IN AREA WHERE ACID DUST IS PRESENT AND HE DEVELOPED A SKING PRESENT AND HE DEVELOPED A SKIN RASH.

EMPLOYEE WAS PULLING ON WELDING LEAD AND PULLED A MUSCLE IN HIS BACK.

EMPLOYEE WAS WORKING UNDER A DUCT AND DIRT PARTICLES BECAME EMBEDDED IN HIS RIGHT EYE.

EMPLOYEE HAS BEEN WORKING IN AN AREA WHERE ACID IS PRESENT THE ACID CAUSED A BURN AND SKIN RASH

EMPLOYEE HAS BEEN WORKING IN AN AREA WHERE ACID IS PRESENT THE ACID CAUSED A BURN AND SKIN RASH

EMPLOYEE WAS WORKING INSIDE AN ACID TANK AND SOME FOREIGN PARTICLES GOT INHIS EYE.

EMPLOYEE WAS PLACING SHIM PLATES BEHIND A BUTTRESS BEAM AND DUST PARTICLES FELL FROM ABOVE.

EE WAS WORKING INSIDE CRUSHER. HE PULLED HIMSELF UP & FELT PAIN IN LEFT ARM.

EMPLOYEE WAS WALKING DOWN A LADDER AND HIT A DOOR CAUSING HIM TO SPRAIN HIS ANKLE.

SMASHED FINGER WHILE LOADING ANGLE IRON ON TRUCK.

EMPLOYEE WAS REPLACING A PUMP WHEN THE CENTRIFUGE SLIPPED OUT OF ITS SLEEVE AND CAUGHT HIS FINGER BETWEEN THE PUMP AND CENTRIFUGE BASE EMPLOYEE WAS WEARING GLOVES

EMP WAS HELPING INSTALL A NEW CONVEYOR BELT. THE BELT WAS BEING PULLED BY A CABLE AND EMPLOYEES FINGER WAS CAUGHT BETWEEN RETURN IDLER BRACKET AND CLAMP

THE EMPLOYEE WAS TRYING TO REMOVE A SHIM FROM A STANDARD CONE CRUSHER ADJUSTMENT POST THE SHIM WOULD NOT COME ALL THE WAY OFF THE POST SO HE JERKED IT IN DOING SO HE CAUGHT HIS THUMB BETWEEN T OP OF THE ADJUST POST SLOT AND THE SHIM

THE EMPLOYEE WAS OPENING A METAL, BOTTOM HINGED DOOR WHEN SHE LOST HER GRASP. THE DOOR FELL, HITTING AND LACERATING HER RIGHT LEG.

EMPLOYEE WAS INSTALLING SCRAPPER ON CONVEYOR. WEIGHT ON SCRAPPER WAS LOOSE AND FELL CATCHING BWETWEEN WEIGHT AND CONDUIT PIPE.