Buscar en el registro

Employee was washing a glass in the sink when it broke causing a laceration to EE's right hand. Employee was treated at the local emergency room and received stitches.

Employee was Tightening a flange on an ozone gas line when they received a burst of ozone gas to the face.

A forklift operator had loaded a supersack bag (1 ton) on a pallet. A coworker later noticed the bag was leaning and attempted to straighten it up by pushing on the bag and felt a sharp pain on the left side of EE's neck and had to seek medical attention. The employee was treated at the ER and taken out of work.

Employee was changing out a bullet screen on a slurry tank car and the screen slipped and in a effort to catch it, it caught EE's right pinky finger, smashing it requiring EE to go to the ER for medical evaluation.

Worker was moving another company's scaffolding for said company while wearing gloves and a sharp area on the pieces of the scaffolding's frame cut through the glove as well as the worker's hand. Witnesses were present and the worker required stitches.

Employee was washing #6 filter and was attempting to move the washup hose around and the compression clamp on the hose cut their right wrist.

EE was cleaning out from under the #4 Feeder and a lump of clay fell from top of feeder and struck the employee in the back of the head. The employee fell forward and hit the front of head.

Employee was trying to hook up an airline hose to the air lance and while doing so, they slightly slipped and their arm twisted and they heard a pop in their right arm/shoulder.

Employee was a washing a filter with a high pressure water hose when the hose came loose. Employee reached to turn the water valve off with right hand and the hose came out of left hand, whipped and pinched the right pinky finger causing a lacerations.

Employee was standing on an elevated platform to open a valve, employee was standing in an awkward position while attempting to open the valve when employee felt a pain in r shoulder.

An employee was shoveling clay from behind the feeders and belt conveyers and strained back.

The employee complained of left shoulder pain and was taken to the hospital fearing it was a cardiac event. EE was diagnosed with shoulder strain. The employee doesn't remember doing anything specific to cause the pain, it just started hurting.

Operator was cleaning out the chemical make down shoot where the bags dump out into the make down system. A lump stopped the shoot so EE began washing down with the water hose when chemical ran down EE's arm under the chemical suit and caused chemical burns on EE's left and right arm.

EMPLOYEE WAS TIGHTENING A HOSE CLAMP WHEN IT SLIPPED AND CUT LEFT HAND REQUIRING STITCHES.

EMP LOWERING BAGGING CHAIR. WHILE PICKING UP ON THE CHAIR EE'S HARD HAT HIT THE START BUTTON CAUSING THE CHAIR TO FALL BACK ONTO EE'S THUMBS CUTTING EE'S RIGHT THUMB REQUIRING (3) STITCHES.

EMP WAS OPENING A VALVE WHEN THEY FELT THEIR LEFT WRIST POP. MEDICAL RESTRICTIONS

PRE-EXISTING NECK CONDITIONS. EMP STEPPED DOWN FROM GREASING CENTRIFUGE FELT DISCOMFORT IN NECK/SHOULDER. DENIED THIS BEING WORK RELATED TO SUPERVISOR AND TO SAFETY MGR. LATER RECEIVED DR. NOTES THAT IT IS WORK RELATED ON 3/21/2019. LATE REPORTING DUE TO INCONSISTENCY.

EMP WAS PULLING ON A METAL DOOR ON THE VALVE BOX IN FRONT OF #2 SPRAY DRYER WHEN EE FELT LEFT KNEE POP. EE CHOSE TO WAIT TO GO TO DOCTOR. KNEE POPPED AGAIN ON 12/26/18 AND EE WENT TO DOCTOR.

EMPLOYEE WAS POKING WET CLAY OUT OF THE ROLLER MILL FEED BIN WHEN EE STRUCK EE'S LEFT LITTLE FINGER RESULTING IN A FRACTURE

EMPLOYEE WAS SPREADING GRANULAR (POWDERED) CHLORINE FOR ALGAE AROUND TANKS WHEN THEY BECAME OVERCOME FROM FUMES. EMPLOYEE WAS TAKEN TO ER WHERE THEY WERE GIVEN A BREATHING TREATMENT AND CHEST-X-RAYS TO CHECK LUNGS (NEGATIVE).

EMPLOYEE WAS REMOVING A BAGGING CHAIR FROM AIR FLOAT BAGGING WHEN EE EXPERIENCED PAIN THAT AGGRAVATED AN ALREADY EXISTING BACK PAIN ISSUE.

EMP ASSISTING ANOTHER - CLIMBING STEPS CARRYING 50 LB BAG OF CMC CHEMICAL WHEN EE FELT A POP AND PAIN IN RIGHT KNEE. EE HAD PT BUT HAS NOT BEEN APPROVED FOR A MENISCUS REPAIR AND THIS WILL RESULT IN LT.

LIFTING TANK CAR LID TO CLOSE AND SEAL MANWAY WHEN EE FELT A SHARP PAIN IN LOWER BACK. - LUMBAR SPRAIN.

EMPLOYEE WAS HELPING CLEAN A HEAT EXCHANGER IN PROCESS BUILDING WHEN A FOREIGN BODY GOT IN EE'S RIGHT EYE. UPON MEDICAL TREATMENT IT WAS FOUND TO BE A SMALL PIECE OF METAL. IT WAS REMOVED AND EE WAS GIVEN A PRESCRIPTION OF NEOMYCIN.

CLIMBING UP ON TANK CAR AND LEFT KNEE POPPED.

EMPLOYEE WAS BACKING DOWN RAIL CARS WITH TRACKMOBILE. EE HAD HEAD BENT CLOSE TO WINDOW FRAME WHEN COUPLING JERKED CAUSING EE TO CHIP TOOTH.

EMPLOYEE WASHING FILTERS WEARING A CHEMICAL SUIT. WHEN EE REMOVED SUIT EE NOTICED A RASH AND STARTED TO WASH THE AREA AND IT BEGAN HURTING AND ITCHING.

EMPLOYEE WAS COMING DOWNSTAIRS FROM TOP OF #1 SPRAY DRYER SILO WHEN EE FELT A CATCH IN MIDDLE LOWER BACK.

Injured Employee was pulling a 1-1/2in x 15ft.cable,4ft. to attach to the back draw bar of his dozer that was stuck. As he attached the cable to the draw bar, he felt a sharp pain in his lower back.He continued operating the dozer until the end of the shift.

Employee was washing out sandmill blunger when he struck sharp blade resulting in cutting his left hand pinky finger requiring stitches.

EMPLOYEE SUFFERED CARBON MONOXIDE POISONING DUE TO PLACING HOT CHARCOALS INSIDE HIS PERSONAL TRUCK AND SITTING IN TRUCK.

LAND EMP WAS STEPPING UP ONTO BACK OF DRILL RIG WHEN HE EXPERIENCED PAIN IN LOWER BACK.

EMPLOYEE WAS CARRYING A 5 GALLON CONTAINER OF OIL AND SOME EMPTY BUCKETS TO TOP OF SPRAY DRYER S-1 TANK WHEN HE FELT A PULLING PAIN IN HIS LOWER BACK.

EMP STANDING ON 6' LADDER ATTEMPTING TO OPEN A 2" BALL VALVE ABOVE HIS HEAD. WHILE PULLING ON VALVE HANDLE HE FELT A "POP" IN HIS RIGHT SHOULDER. THIS WAS CONSIDERED A TORN BICEP. HE SAW OUR PANEL ORTHOPEDIC WHO STATED HE WAS TO BE ON LIMITED DUTY FOR 1 MONTH.

Pulling wires thru conduit; twisted back.

EMPLOYEE RESTACKING 50 LB BAGS OF CLAY AND FELT PAIN IN LOWER BACK TO THE POINT OF NOT BEING ABLE TO MOVE.

EMP AT MAKE DOWN OPERATION PICKING UP 50LB BAG WHEN HIS FOOT SLIPPED AND HIS BACK WENT OUT RESULTING IN PAIN IN LOWER BACK.

EMPLOYEE WAS MODIFYING COMPACTOR CONVEYOR BELT GUARD BY INSTALLING A HINGED 36'X36' ACCESS DOOR TO MAKE IT EASIER FOR THE OPERATORS TO GET TO AREA. HE WAS ATTEMPTING TO MOVE GUARD FOR BETTER WELDING ACCESS WHEN HINGED DOOR FELL CATCHING TIP OF LEFT RING FINGER BETWEEN 1/2' ANGLE IRON ON THE GUARD AND HINGED DOOR RESULTING IN CONTUSION AND FRACTURE TO BONE ON END OF FINGER.

DURING A TRIAL SET UP, EMPLOYEE WAS MOVING A SCREEN BASKET WHEN HIS HAND/FINGER SCRAPED END OF TWO FEED LINES WHICH CUT THE TOP OF HIS INDEX FINGER REQUIRING STITCHES.

EMPLOYEE WAS USING HIGH PRESSURE HOSE TO WASH UP WHEN HOSE SLIPPED FROM HANDS AND STRUCK HIM IN THE MOUTH REQUIRING STITCHES.

Co-worker was holding tension on the reject colander shaft with a pipe wrench so injured employee could add two links to chain on reducer. while injured emp was attempting to install master link lock, the pipe wrench slipped causing it to catch his left hand middle finger in a pinch point between chain and sprocket result in laceration requiring stitches.

ATTEMPTING TO PLACE DOLLY UNDER STORAGE LOCKER WHEN LOCKER WAS DROPPED MASHING LEFT THUMB BETWEEN LOCKER AND DOLLY RESULTING IN SOFT TISSUE/FRACTURE INJURY.

EXPERIENCED PAIN IN LOWER BACK AFTER OPENING VALVES ON TANK AT FLOOR LEVEL.

While washing his hands EE hurt his middle finger on his right hand, damaged tendon leading to finger being put in splint.

PRESSURE CLEANING 3/4X14" PVC PIPE HOLDING PIPE IN PLACE WITH FOOT USING EXTREMELY HOT WATER WHEN SPRAT BAR ACCIDENTALLY HIT TIP OF BOOT CAUSING HOT WATER TO PENETRATE BOOT AND BURN FOOT.

OPENING CONTAINER DOOR WHEN THE LATCH SPRUNG BACK AND HIT HIM IN FACE UNDER EYE AND BREAKING HIS NOSE.

Employee was standing tying bulk bag when he felt his back "go out".

EMPLOYEE LIFTED AN 8' LADDER OFF BACK OF PICKUP TRUCK AND EXPERIENCED LOWER BACK PAIN.

Employee opened door of loader and some dirt fell off door into eye. He was wearing safety glasses.

EMP WAS CLOSING SLIDE GATE ON #2 CALCINER DISCHARGE INTO HOT SCREW. HE HAD TO CROSS OVER TO THE OPPOSITE SIDE TO FINISH OPENING GATE. AS HE PASSED UNDER THE HOT SCREW, HOT CLAY FELL FROM CHUTE AND HIT HIS NECK, BACK OF HEAD AND EARS, CAUSING 2ND DEGREE BURNS.