Buscar en el registro

Employee was flipping gate on 2 belt to 3 belt transfer point. Gate pinched middle finger on left hand causing minor contusion. Finger later became infected.

EE was using pressure water hose to wash out the sand screws. When the water pump was turned on the hose jerked causing the EE to fall. EE struck his left arm on the plant causing a laceration just above the elbow.

Employee was changing screens in the stone sizing plant. Employee was pulling on the screen to remove it from the screen deck and he pulled a tendon in his right arm.

Employee was lifting an electric motor from it's mount using a block and tackle. The motor was caught on the base. The employee twisted the motor to free it and the motor sprang up striking the employee's left arm.

EE WAS MOVING SPARE RETURN ROLLER FOR CONVEYOR. A SECOND ROLLER FELL AND STRUCK EMPLOYEE ON RIGHT HAND.

EE WAS PERFORMING WELDING MAINTENANCE IN THE WELDING SHOP ON A TRK BODY EE WAS MOVING AROUND INSIDE THE TRK BODY WHEN HE SLIPPED & CAUGHT HISFINGER ON THE EDGE OFA PIECE OF STEEL THAT WAS B EING WELDED TO REPAIR THE TRK B0DY

EE LIFTED A BEARING WITH A RATCHET HOIST TO SLIDE THE BEARING ONTO THE SHAFT. WHILE TWISTING THE BEARNING TO ALIGN IT ON THE SHAFT, EE INJURED HIS BACK.

WHILE LIFTING A PIECE OF STEEL IN THE WELDING AREA, EMPLOYEE PULLED A MUSCLE IN HIS BACK.

EMPLOYEE WAS LIFTING A PIECE OF STEEL PLATE TO BE WELDED TO A SHOVEL BUCKET. EMPLOYEE PULLED A MUSCLE IN HIS BACK.

EMPLOYEE CLAIMS TO HAVE EXPERIENCED BACK PAIN WHILE BENDING OVER TO INSTALL A PART ON THE ROCKTRUCK.

STEEL SLIPPED AND JAMMED FINGER AS I WAS MOVING STEEL PLATE FOR STORAGE.

STRAINED BACK WHILE LIFTING PULLING AND BENDING INSTALLING SCREEN CLOTH.

WHILE BEING REMOVED FOR REPAIR, THE CONVEYOR IDLER DROPPED ON FINGER AND CUT IT OPEN.

PULL IN LOWER ABDOMEN WHILE MOVING DRUMS OF OIL.CAME BACK TO WORK BUT WAS OPERATED ON AND OUT OF WORK FROM 02-25-91 TO 03-08-91.

STRAINED HIMSELF LIFTING 50 LB.

EMPLOYEE CUT FINGERS ACROSS EDGE OF STEEL CATWALK.

REPAIRING FLIGHTS INSIDE DRYER LIFTED ONE TO MOVE IT & HURT BACK.

ATTACHED ENGINE TO LARGE A FRAME TO INSTALL IN ROLLER #61 PUSHING ON RT SIDE OF A FRAME TO POSITION A FRAME & ENGINE OVER ROLLER FOR INSTALLATION FELT TENDON SNAP IN BACK OF LOWER RIGHT LEG

DISASSEBLING A DIESEL ENGINE WHEN SOMETHING SNAPPED IN RIGHT ELBOW.

PICKING UP PIECE OF STEEL. STEEL SLIPPED & CUT THROUGH GLOVE & HAND. WENT TO HOSPITAL FOR STITCHES.

WHILE RELOCATING LEFT OVER STEEL TO THE STORAGE AREA A PIECE OF STEEL PLAT FELL OVER AND LANDED ON THE BRIDGE OF MY R FOOT

PLANT OPERATOR WAS LIFTING FROZEN CHUNKS & TOSSING THEM OUT WHEN HE FELT SHARP PAIN IN BACK.

HE WAS MOVING PLOW FRAME TO WORK ON IT WHEN IT SLIPPED FROM THE TRACK AND LANDED ON HIS HAND.

DROPPED A BEARI3G COVER PINCHING FINGER BETWEEN COVER & BEARING PLATE NO BROKEN BONES OR LACERATION OF THE SKIN SWELLING ONLY

I.NAME WAS REPA3RING A CRACKED HYPRAULIC TANK FOR A FRONT END LOADER HE WAS IN THE PROCESS OF SLIDING THE TANK TO ONE SIDE WHEN THE INJURY OCCURRED TO HIS BACK

I,NAME WAS PICK3NG UP STED AT PLANT TO CLEAN YARD WHEN THE EDGE OF STEEL STEPPED OUT OFF HIS HAND AND THE END CUT HIS FACE ON THE RIGHT SIDE.

I WS PICKING UP A BAG OF SPEEDY DRY WHEN I TURNED AROUND TO WALK AWAY THE STEEL BAR WAS STICKING OUT OF THE GUARD ON THE PRESS AND I GOT IT IN THE SIDE

CROUCHED UNDER HAUL TRUCK AND LIFTED STEERING PARTS AND PULLED MUSCLE IN LEFT CALF.

MAKING HOUSE GEAR REPAIR MECHANIC HAD SLIVER OF METAL PUNCTURE RIGHT HAND.

HE WAS IN THE PROCESS OF WASHING OUT THE TANK FOR REPAIR WHEN IT TOPPLED OVER OFF THE TWO WHEEL HAND TRUCK ON WHICH IT WAS RESTING. THE TANK WAS FULL OF WATER AND WEIGHING APPROX. 700 LBS. WH EN IT LANDED ON TOP OF HIS RIGHT FOOT CRUSHING HIS TOES (3).

REPLACING TOGGLE PLATE ON JAW CRUSHER PUT PRESSURE ON LEG PUTTING TOGGLE IN PLACE TWISTED LEG

EMPLOYEE WAS LUBRICATING POINT SHEAVES ON BOOM AND LOST BALANCE, WHEN TRYING TO CORRECT BALANCE TENDENS IN LEFT LEG WERE RUPTURED.