Buscar en el registro

Electrician tried to manually manipulate a locked out electrical motor via the "V" belts and got fingers pinched in the flywheel.

EE was hosing down the wash plant pad when EE felt a pop in shoulder.

Material slough, partial engulfment, follow up appointment revealed hernia.

Worker strained back while pulling a 5 gallon bucket of water up onto an elevated walkway to prime a pump on April 17. He continued to work his normal schedule until May 2nd. On May 3, he went into the doctor due to ongoing back pain and was prescribed a prescription muscle relaxer, physical therapy and released to full duty. He returned to work on his next scheduled shift.

Employee was working in a feeder tunnel trying to straighten a plastic tube. He didn't feel any pain initially but started to hurt a few hours later.

Employee was loading and off-loading blasting supplies (approx 50 lb bags) from storage machine to a pick up truck and from the truck to drill holes at the quarry bench. Employee could not identify a particular incident or event of injury but started to feel pain in his hip that continuously got worse during the day.

Employee had sand in eye resulting in scratched cornea. Employee unsure when sand got in eye, it may have been during clean up around the wash plant or having rubbed his eye with a dirty glove.

Employee strained tendon in his left leg as he was working on changing a conveyor belt.

Worker was lifting steel door into the syntron of the pit run tunnel when he strained his back. Worker is receiving therapy and on prescription medication.

EMPLOYEE WAS MOUNTING A TOOLBOX ONTO A SERVICE TRUCK. WHEN HE PUSHED THE TOOLBOX, THE LID CAME DOWN ONTO HIS LEFT INDEX FINGER, LACERATING AND BREAKING IT.

WHILE MOVING SOME PIPE HE SMASHED HIS SMALL FINGER.

WHILE REPLACING A TROUGHING ROLLER HE STRAINED HIS BACK

WHILE LIFTING A PIECE OF DRILL STEEL FROM THE GROUND TO PUT RT BACK ONTO THE DRILL HE STRAINED H LOW BACK.

WHILE CHANGING OUT SCREENS EE LIFTED THE ONE END OF THE SCREEN AND THEN TURNED THE SCREEN SO HE COULD HOOK THE END OF THE SCREEN TO THE BOOM TRUCK HOOK TO RAISE IT OUT AND IN. HE TWISTED HIS R IGHT KNEE. NOTE: HE DID NOT SEE A PHYSICIAN FOR THIS UNTIL 7/26/01.

EE HAD HIS RIGHT HAND RESTING ON A SOLID PIECE OF MACHINERY WHEN THE VBELT SWING AWAY GUARD SWUNG BACK AGAINST HIS HAND

THE EE THREW DONW A PRY BAR FROM THE DECK OF A PORTABLE SCREENING PLANT. THE BAR STRUCK OR LANDED NEXT THE SCREENING PLANTS LADDER IN AN UPRIGHTPOSITION WHEN THE EE CAME DOWN THE LADDER HE HIT HIS LEFT RIB CAGE ON THE BAR

STRAINED HIS BACK WHILE CHANGING OUT WEAR PLATESON THE MESABLE DECK.

WHILE LIFTING A PIECE OF TRACK DRILL STEEL HE STRAINED HE S BACK.

WHILE LIFTING A SHEET OF STEEL PLATE, THE SHEET SLIPPED FROM THE "C" CLAMP HOLDER AND SMASHED THE END OF HIS LEFT RING FINGER. THE "C" CLAMP WAS NOT PUT ON PROPERLY.

WHILE RELEASING THE BRAKE FLUID PRESSURE ON THE WHEEL DRUM CYLINDER THE BRAKE FLUID WENT IN THE LEFT EYE.

A MECHANIC WAS CLEANING OFF A SURFACE HE WAS WORKING ON WITH COMPRESSED AIR.A PIECE OF METAL FLEW ACROSS AND HIT HIM IN THE RIGHT EYE.

INJURED WAS LIFTING A FIVE GALLON JUG OF WATER.

SHOVELING UNDER A CONVEYOR BELT.

EE HAS HAD AN ONGOING BACK PROBLEM FOR YEARS. HESEES A LOT OF DOCTORS FOR HIS CONDITION. HE MISSED WORK ON 3/31/95.

EMPLOYEE SAID HE PULLED HIS BACK OUT AGAIN WHILE CHANGING STEEL. HIS DR SAYS NOW THAT HIS BACK COULD BE HURTING FROM HIM HAVING FLAT FEET. HE GAVE EE SOME NEW ARCHS FOR HSI BOOTS AND EE SAYS HE FEELS FINE NOW. SI IS IT A ACCIDEN TOR NOT.

EMPLOYEE IS SAYING HIS BACK IS HURTING BECAUSE OF ALL THE LIFTING HE'S BEEN DOING OVER THE LAST FEW YEARS. THE EMPLOYEE IS TRYING TO OPEN A PRE-EXISTING CLAIM. THE ACCIDENT HAPPENED IN 1988. T HE EMPLOYEE WAS WORKING FOR AN INDUSTRY COMPANY THAT DID NOT REPORT TO MSHA.

LOOSE DIRT ON HIS HARD HAT FELL INTO HIS LEFT EYE.

SWOLLEN RIGHT KNEE- CLEANING UP.

TWO PEOPLE THROWING CRUSHED AIR CLEANERS INTO GARBAGE BURNER. EMPLOYEE 1 CAUGHT HIS HAND UNDER THE AIR CLEANER EMPLOYEE 2 WAS THROWING

HE WAS USING AN AIR FILTER FOR A BOBCAT AS A SPACER. WHEN HE TOOK THE AIR FILTER OUT FROM UNDER THE CAB AND THROUGH THE FILTER HE HADN'T NOTICED THAT HE BENT THE CASING AND A SHARP EDGE WAS NO W EXPOSED. THE SHARP EDGE OF THE AIR FILTER CUT THE LEFT INDEX FINGER.

LIFTING A PIECE OF STEEL TUBING

WHILE LIFTING DRILL STEEL EE TWISTED & PULLED HIS BACK OUT.

EMPLOYEE WAS REPAIRING A COMPRESSOR FROM UNDENEATH THE UNIT.AS HE WAS MANUVERING FROM UNDER THE MACHINE,FOREIGN PARTICLES DROPPED FROM THE UNIT INTO HIS FACE.A PARTICLE LODGED IN HIS RIGHT EYE AND WAS NOT REMOVED UNTIL THE NEXT DAY WHEN DISCOMFORT BECAME APPARENT.HE THEN REPORTED IT TO HIS SUPERVISOR AND WENT TO A CENTER FOR MEDICAL ATTENTION.

LIFTING MATERIALS

DRILLER AND MECHANIC WERE REPAIRING DRILL FEED DRIVE. HIS GLOVED HAND SLIPPED AND SLID ALONG A SHARP EDGE ON A RAIL THE HAMMER RUNS ALONG. THEY HAD WARNED EACH OTHER OF THE HAZARD BUT PROCEEDE D WITHOUT GRINDING THE EDGE. A LACERATION ON LEFT INDEX FINGER WAS THE RESULT.