Buscar en el registro

Employee was moving railcars at the loadout area of the plant. Employee attempted to adjust/tighten hand brake on a railcar. In the process of doing so the employee's left quadricep was pinched between the couplings on 2 railcars. Employee was taken to local ER for treatment and evaluation. At this time the employee is still receiving treatment at the facility.

Loading a shot, stepped on uneven ground, pain in right leg/hip (1st day of treatment 7/21/2022).

The employee was in the process of loading railcars at our loadout area. While opening and closing lids employee strained their back. On 6/12/2022 employee notified supervisor of pain again. Employee was taken to a local medical facility for evaluation. Where it was determined a strain and was later given physical therapy prescription.

Employee was shoveling material and strained a muscle in their lower back. Employee was treated and returned to work with no restrictions.

Employee was assisting with removing a pulley from a conveyor when they attempted to lift one side from an awkward position, causing a hernia.

The miner was cleaning metal from the stone belt magnet by hand. EE was wearing leather driver gloves. EE attempted to pulling a 5 inch X 3 inch X 1.5 inch metal fragment from the belt magnet and cut a finger when their grip slipped. The miner did not see the sharp edge shavings attached to the metal and pulled across them cutting the right index finger requiring stitches.

While inspecting the 4 & 5 truck load out chute repair employee's right ring finger tip was pinched off into their glove. Employee was checking the slack in the cable when a second employee started to raise the chute pinching the finger between the cable & pulley.

While raking the grates on the #1 kiln The miner pinched left small finger between the metal hoe handle and the building support beam. EE was wearing drivers gloves. A X-ray was taken showing a fracture to the left hand small finger distal phalanges.

Driver was unloading at the incident location when the hose fitting separated from the silo and blew hydrate lime in the drivers eyes.

While racking grates he strained the left shoulder.

Employee was raking the kiln grates. He was pulling a large piece off the grates when he felt a pull in his left shoulder.

While emptying a trash Barrel the employee pulled on the lip at the bottom of the barrel with his right hand to flip it over into a loader bucket. During the lift he pulled the middle finger causing it to hurt and swell 2 weeks later. Miner went to the doctor on 10/17/2012 and did not miss any time. He did receive a prescription making this a reportable injury.

While climbing a ladder in the hydrator area a mass of lime fell striking EE. The mass was from the wet lime on a boot that had stuck to a rung above him. The safety glasses were dislodged and the mass landed in the right eye. The contact caused chemical burns and no vision impairment. He received a eye cream. The miner had no restricted duty/lost work days.

Employee was cleaning lime pit. He received lime burn on both legs. He notified employer on 5/31/2011. Burns became infected and went to the doctor on 6/4/2011.

He was removing trunion bearing housing. When the housing came free it swung and pulled his right shoulder. He sprained his shoulder.

He was installing O2 probe. The probe slipped and mashed his finger. The finger was just bruised.

Employee was working on th #2 kiln dust elevator and dust from the elevator got into his eyes.

He was removing a hydraulic cylinder from a preheater ram, when the cylinder was removed, the ram moved pinching his right leg.

Employee was removing coal mill roller from coal mill. When the roller came free his right hand was caught between the roller and the burner pipe. He suffered a cut to his right hand.

Employee was lifting a cooler grate with the help of another employee. He strained his lower back.

Employee was positioning forks on a forklift and the fork slipped pinching his right ring finger, cutting and fracturing his right ring finger.

EE WAS REMOVING COAL RING & CARRYING BOXES OF REFRACTORY. DURING THIS TIME HE STRAINED HIS BACK.

RIGHT HAND WAS CAUGHT BETWEEN V-BELT AND DRIVE PULLEY FOR DUST SCREW. CUT RIGHT HAND.

EE WAS INSIDE KILN REMOVING AN ASH RING MATERIAL FELL FROM OVERHEAD AND STRUCK HIM ON HIS BACK AND RIGHT LEG. HE HAS ABRASIONS AND BRUISES ON HIS BACK AND RT LEG.

EE WAS HELPING TO LOAD TRAIN CARS HE WAS.

HE WAS WORKING ON QUICKLIME ELEVATOR, AND EXPOSED TO QUICKLIME. 2ND DEGREE BURNS ON RT. ARM & ARMPIT.

PULLING ON BAGHOUSE DOOR, PULLED MUSCLE IN BACK.

LIFTING LOADED PALLET OF HYDRATED BAGS, RIGHT LINGUINAL HERNIA.

EE WAS LIFTING 5 GALLON BUCKET OF OIL FROM THE GROUND TO A 4' PLATFORM. WHILE HE WAS LIFTING HE HURT HIS LOWER BACK (MUSCULAR LOWER BACK PAIN).

ONE PIECE OF SIX INCH STEEL PIPE, STRUCK THE EE IN THE CHEST AND FRACTURED HIS CLAVICLE.

QUICKLIME FELL INTO RIGHT EYE. CHEMICAL BURN OF RIGHT EYE.

HYDRATED LIME FROM BALLMILL WAS BLOWN INTO EYES CAUSING A CHEMICAL BURN.

EMPLOYEE WAS HIT IN LEFT EYE WITH DIRTY WORK GLOVE.

TRYING TO DISLODGE ROCK FROM CRUSHER STRAIN BACK.

MOVING A 55 GAL DRUM OF DIESEL FUEL,THE DRUM FELL ON HIS RIGHT FOOT.

QUARRY TRUCK RA8IATOR WAS HOT EMP WAS REMOVING RADIATOR CAP TO CHECK WATER LEVEL, WHEN HOT WATER SPEWED OUT, BURNING LEFT HAND ATHROUGH GLOVE 2ND DEGREE BURN

WHILE USING PUL5DOWN STAIRWAY BRACKET HOLDING COUNTERWEIGHT CABLE BROKE CONTERWEIGHT FELL 6 FT ON EMPLOYEES BACK

STRUCK RT KNEE 5GAINST EDGE OF PIECE OF SHEET METAL KNEE LOCKED UP. WWORKED UNTIL 11-21. OPERAYTED ON KNEE OUTPATIENT 11-22. RETURNED TO WORK 11-27.