Buscar en el registro

Mechanic was under a dozer looking for a leak on the equalizer bar. Once the mechanic found the problem, EE went to crawl out from underneath the dozer EE used EE's arm to assist self in getting up. In this process EE's left shoulder dislocated from the socket.

Dragline operator cut the tip of finger while reinstalling a lower hoist chain pin during a PM. Dragline Operator's ring and pinky fingers were pinched under the pin's locking collar cap, with the ring finger taking most of the injury. The tip of the ring finger was cut off with only slight pinch damage to the pinky.

Installing pin in spreader bar for dragline rigging, pin started in hole and was not down completely reached to grab pin, then grabbed pin and pin fell into hole completely, which entrapped ring & middle finger, causing them to be smashed. Went to hospital where X-rays showed no breaks, but did result in nine stitches to ring finger.

When the pin was backed out of a rear trailer strut, it swung free & struck the employee in the lower lip.

Injured employee crushed left little finger between the flat bed pickup rail and replacement dragline bucket tooth that ee was loading into the truck bed.

While inspecting the bin level measuring system on a prill storage silo the injured employee suffered facial and skull lacerations when the unsecured manhole cover fell on to the employees head. Injuries would have been more severe had the injured employee not had EE's hard hat on.

Employee was hooking up a coolant hot start coupler. As he was pushing the coupler together he felt a pain in his left shoulder. He was taken to the doctor for evaluation. The doctor prescribed medication and released him to return to work. Further evaluation to follow.

Employee is a utility oiler and has being doing oiling duties for 25 years. He states that he has developed a hernia on his right side, he had a hernia on his left side 12 years prior. His duties include pulling a 2 inch diameter hose off a hose reel and fueling heavy equipment along with climbing on and off equipment to check fluid levels.

At the East Coal Plant. A hinged inspection plate was opened to help align a cover with holes on the mounting bracket. The cover bound up and while trying to relieve the bind in the cover the employee placed his right hand in line with the plate. When the bind released the plate came down on the employee's right index finger. Right finger to be severed.

Two employees were trying to let down the mast on a light plant. The employees were trying to pull the base of the mast up so the mast could lay down. The mast slid back into the channel lacerating the end of the right ring finger on one of the employees hand. Medical attention required to apply stitches to the finger.

Warehouseman was moving a pallet of parts. He lifted one end of the pallet up and as he set it back down, his right index finger was pinched between the pallet and the part on the pallet underneath, requiring medical evaluation.

Drill operator opened the cab door on an overburden drill. When he closed the door his left thumb was shut in the door lacerating the end of the thumb.

Electrician trainee was carrying a 14 pound box of brushes for a dragline motor from the warehouse to his truck, when he felt his back give out, almost dropping the box. He continued to work and his back pain became worse. At 1:00PM he was in for lunch and his back pain got worse.

Dragline operator was placing the boarding steps into place to start a repair on dragline. He removed the step from the storage area and dropped the steps on his left foot resulting in fracturing two bones in his left foot.

Employee, a mechanic was removing a tie rod from a CH 150 coal hauler. While holding onto tie rod, another mechanic knocked tie rod loose injuring the back of the employee holding onto tie rod. The tie rod weight is about 50# and only one end was taken off truck.

Oiler was moving cable @ Dragline and felt a pop in wrist. Xrays showed no positve findings and he returned to work. On 6-10-09 emp. returned to doc for MRI which showed small fracure on wrist. Emp. again has been released to work pending further diagnosis as he suffers from Heinbocks disease, a rare bone disorder. Emp. has missed no work due to his injury.

Cat 518 skidder door was accidently shut by mechanic asisting in getting the skidder started and unstuck smashing operators finger. Employee received a laceration to right ring finger that required stitches to close the wound, and the removel of the nail. Employee returned to work his next scheduled shift. No lost time.

Oiler reported pain in right shoulder after changing filters in drill. Was taken to Dr. and no injury was found. A week later continued to complain of pain was taken to ortho and no injury was found. 4 weeks later an mri was done and was diagnosed with a torn rotator cuff. Surgery is pending and he continues full duty.

A weld on a tag broke and contractor employee tried to catch the brass washer to keep from falling. The brass washer fell two feet (2 ft.) shearing his left pointer finger between the brass washer and the 3rd initial bore of a 1570 Dragline.

After removing a lighting pole light fixture, employee was loading the fixture (approx. 40 lbs) into the bed of a pickup truck and felt a slight pop/pull in the back of his right shoulder. Checked out by a physician as a precaution.

Employee suffered a lower back muscle spasm while carrying an 85 lb. return roller to the tail pully area of belt #3, a 60 inch conveyor. It requires climbing 2 flights of stairs to get to the tail pully of belt #3

While boarding the drill employee heard and felt a pop from his left knee. On Oct. 20th an MRI revealed a torn medial collateral ligament and medial meniscus.

The plant operator was feeding coal into the grizzly when a chunk of coal became lodged between the conveyor & bin under the grizzly. He attempted to remove it when his little finger was pinched and lacerated. He received 6 sutures in the emergency room.

PAIN AND RUBBING FEELING IN LOWER BACK WHEN EMPTYING BARRELS OF COAL.

ON MONDAY, MARCH 4TH EE WAS INVOLVED IN MOVING A DRILL ON THE R-85 LOWBOY. HE WAS ATTEMPTING TO PICK UP A RAMP EXTENSION THAT WEIGHED 70 LBS WHEN HE FELT PAIN IN HIS BACK. LATER IN THE WEEK HE WAS TAKEN TO THE HOSPITAL FOR SEVERE BACK & LEG PAIN.

PULLED PAN OUT OF SPLITTER AND FELT PAIN IN ELBOW. WENT TO EMERGENCY ROOM AFTER HOURS AND DR SAID SHE HAD PULLED TENDON.

EMPLOYEE WAS OPERATING #53 COAL HAULER. HE WAS LOADED AND PULLED ACROSS THE TRAPS TO DUMP, WHEN HE PULLED UP ON THE DUMP LEVER WITH HIS LEFT HAND, HE FELT PAIN IN HIS UPPER AND LOWER BACK.

EE SAID HE HAD JUST LIFTED SOME TRAILING CABLE ONTO THE STINGER OF THE LOG SKIDDER AND RAN THE LOD SKIDDER OT MOVE THE CABLE FORWARD. EH THEN DECIDED TO TALK TO A CO-WORKER. AS HE WAS CROSSI NG THE GROUND ON FOOT, HE STEPPEDON AN UNEVEN AREA AND FELT A SHARP PAIN IN HIS BACK.

EMPLOYEE WAS WORKING ON THE STEEL RACK ON OVERBURDEN DRILL WITH ANOTHER EMPLOYEE. 1ST EMPLOYEE WENT TO THE MECHANIC'S TRUCK AND OPENED THE DOOR ON THE COMPARTMENT THAT HELD THE TOOLBOX. HE REA CHED IN FOR A WRENCH AND A GUST OF WIND BLEW THEDOOR SHUT. THE DOOR STRUCK HIS LEFT ELBOW, FRACTURING THE BONE. HE WAS TREATED IN THE EMERGENCY ROOM AND RETURNED TO WORK.

USED FOOT TO TRY TO INSTALL A COUNTERWEIGHT ON A LAB CRUSHER. RECEIVED PAIN IN ANKLE THAT WOULDN'T GO AWAY. NEED TO HAVE CHECKED BY A DOCTOR TO SURE O.K.

EE WAS GOING TO UNLOAD A 117# DRILL BIT AT #3 60R OVERBURDEN. HE BACKED THE TRUCK PERPENDICULAR TO THE DRILL ON AN INCLINE. WHEN HE OPENED THE TAILGATE THE DRILL BIT FELL OUT STRIKING HIS RIGH T FOOT.

PAIN IN ELBOW AFTER CARRYING BUCKETS OF COAL. PAIN DIDN'T GO AWAY.

EMPLOYEE WAS DIAGNOSED WITH AN INGUINAL HERNIA ON 2-20-98. HE BELIEVES THE HERNIA WAS CAUSED FROM LIFTING DRAGLINE BUCKET WAR CAPS THAT WEIGH 113 LBS. ON 2-6-98. HE STARTED FELING PAIN IN HIS ABDOMEN 3 OR 4 DAYS LATER. HE IS SCHEDULED FOR SURGERY ON 3-24-98. HE REPORTED HIS ACCIDENT ON 3-2-98.

EMPLOYEE WAS WASHING #518 COAL DRILL WITH A FIRE HOSE WHEN MUD AND GREASE SPLASHED BACK ON HIS FACE. HE THEN FELT SOMETHING IN HIS LEFT EYE. HE WAS WEARING SAFETY GLASSES.

EMP WAS INVOLVED IN GREASING THE RETURN ROLLERS ON #3 CONVEYOR BELT AT THE EAST COAL PLANT. WAS UNDER THE CONVEYOR BELT WHEN ANOTHER EMP ATTEMPTED TO CLIMB ONTO TOP PORTION OF BELT. THIS EMP G RABBED ONTO A TROUGHING ROLLER GUARD WHICH CAME LOOSE AND STRUCK EMP.

HE WAS ATTEMPTING TO SLIDE A 3" X 3" X 1/4" X 20' PIECE OF STEEL OFF THE FORKS OF A FORKLIFT INTO A STEEL RACK. THE PIECE OF SQUARE TUBING FELL OFF THE FORKS AND THE SHARP EDGE ON THE END OF T HE STEEL CUT HIS FINGER.

HE WAS LIFTING, MOVING, & WORKING ON 5 CALORIMETER WATER COLLERDS. WAS BEN DOWN WORKING & TRIED TO GET UP, HAD EXTENSIVE BACK PAIN & COULDN'T HARDLY MOVE.

EE STATED HE WAS WORKING INSIDE THE TRAILER OF ACOAL HAULER GRINDING RUST SO THE METAL COULD BE PRIMED. HE RAISED HIS WELDING HELMET TO SEE WHO WAS STANDING BEHIND HIM; AT THAT POINT SOME SMAL L FRAGMENTS DROPPED OFF HIS WELDING HELMET INTO HIS EYE.

THE FOAM TANK FELL OFF WATER TRUCK BEING OPERATED BY EE. EE WAS HELPING THE FIELD MECHANIC PUT THE TANK BRACKET ON TO THE MECHANIC'S TRUCK WHEN HIS FINGER WAS PINCHED AND SMASHED BETWEEN THE B RACKET AND FOAM TANK SPOUT.

INJURED WAS ATTEMPTING TO INSTALL A 40# PIN,THA HELD THE PULLING HITCH ON THE 295B SHOVEL.WHEN THE PIN DROPPED INTO PLACE,IT PINCHED HIS FINGER.

EE ATTEMPTING TO STRAIGHTEN A 21/4IN DUMP ROPE INTHE SOCKET WHEN HE MOVED IT THE END OF THE ROPE CAME OUT OF THE SOCKET STRIKING THE LEFT SIDE OF HIS FACE & HEAD

ON 2/3/95 EMPLOYEE WAS TALKED TO ABOUT SOME PERFORMANCE & CONDUCT ISSUES BY HIS SUPERVISOR. HE MENTIONED HE WAS WORN OUT, BURNED OUT, & WORK HURT HIS BACK. ON MONDAY HE CAME TO WORK CLEANED OU T HIS LOCKER & TOLD A FELLOW WORKER HE HURT HIS BACK LIFTING AN ACCUMULATOR OFF A SHELF. HE HAD BEEN INTERESTED IN A RETIREMENT BUY OUT PREVIOUS TO HIS ALLEGED INJURY, WORKER'S COMP INVESTIGA

EE WAS SITTING IN THE SEAT OF THE COAL DRILL WHEN HE REACHED BEHIND HIM TO LIFT A 21LBS BUCKET OF BIT CLAWS. IN THE PROCESS OF LIFTING THE BUCKET HE TWISTED INJURING HIS BACK.

INJURED WAS LIFTING AND PULLING 4" PLASTIC PIPE IN ORDER FOR TWO JOINTS TO BE WELDED TOGETHER. IN THIS PROCESS HE INJURED HIS BACK.

INJURED WAS MOVING A PORTABLE STAIRWAY WHEN HIS RIGHTHAND STRUCK A BOLT HEAD ON A SCRAPER CUTTING IT.

INJURED HAD TAKEN AN ARGON GAS CYLINDER FROM THEBOTTLE RACK AND PLACED IT ON A HAND CART TO TAKE IT INTO THE SHOP. THE ARGON BOTTLE FELL OFF STRIKING HIS FOOT.

EE WAS WORKING ON #2 P.H. SHOVEL, HE WAS ATTEMPTING TO CATCH AND STABALIZE AN ARGON BOTTLE THAT WAS FALLING. THIS PUT HIM IN A BAD POSITION INJURING HIS BACK.

EE WAS ATTEMPTING TO LIFT ONE END OF A 1 1/2" CHOKER AND HOOK IT TO A CRANE WHEN HE FELT A PAIN IN HIS SHOULDER.

SHOVELING SNOW FROM DRIVEWAYS BSIDE THE WEST DECKER COAL CO GUARDHOUSE. STRAINED AND PULLED LIGAMENTS AND MUSCLES IN LEFT BACK AND HIP.

EE WAS INSTALLING CUTTING EDGES ON A SCRAPER. HE TWISTED HIS BODY WHILE LIFTING AND PINCHED A NERVE IN HIS NECK.