Buscar en el registro

A chain broke, causing a piece of metal to fall and strike EE's hand.

Inspecting transmission gears, gears rolled and pinched finger.

Employee was struck by a chain he was installing.

Hydraulic hose end blew off causing a flash fire. Employee received slight burns to arms. Treated and released for the burns. While leaving truck, employee struck his right knee and bruised his heel. Company doctor took employee off work until knee and foot healed.

Employee was cleaning in the prep plant with a shovel. When he twisted around he felt pain in his knee. Employee worked until 08/15/2009. It took until 09/16/2009 for it to be determined from a peer review if this was a new injury and not a re injury. This is why the 10 day limit was passed.

Employee was unhooking a pump hose when the end came loose and struck his cheek.

Fuel hose struck his nose. On medication and cannot work.

Repairing on dryer.

Employee was getting a chain out of a tool box, when the lid of the box fell on his finger.

Employee was cleaning ice on refuge belt roller, when glove caught on roller.

Repairing in the wash plant changing an 8 in pipe when a piece broke and fell striking his lower leg.

Employee had a socket break in his hand cutting his palm requiring stitches.

Employee was working on an D-11 dozer putting the track together when his chain slipped causing the track to strike his knee.

HE WAS HELPING THE MECHANIC PUT A GUARD ON THE RIPPER SHANK OF A D-11 DOZER, HE WAS HOLDING THE KEEPER FOR HIM. THE MECHANIC SLIPPED MASHING/CUTTING EE'S MIDDLE RIGHT FINGER.

Cut left small finger with a broken hose clamp.

LIFTING LIGHT PLANT ONTO HITCH OF TRUCK. LIGHT PLANT SLIPPED THROUGH HIS HAND AND FELL. IT LANDED ON HIS FOOT.

Changing spirals. Pushing up on the "t" to pull hose down onto it.

Changing dryer screen at wash plant. Screen was worn on and sharp on edges. Victim sliced his little finger on side of screen.

Employee had just put a pin in the ripper and as he was standing up the ripper shifted causing the chain from the boom to drop hitting him on the shoulder.

Working on Grease Truck, turned and hit forhead on ladder requiring stitches.

Loading hydraulic pump into back of parts truck. Pump flipped over pinning finger between pump and truck bed.

Operator said his end dump was over heating. The operator stopped to check coolant level and as he was loosening the filler cap it came off suddenly and sprayed his face and chest and arm with hot coolant. It resulted in first and second degree burns on his face, arm, and chest.

He was entering dozer and hit his head on a converter mounted in it.

Lifting and cleaning heavy equipment parts.

Tearing down and cleaning engine parts. He was lifting and moving heavy parts and twisted back.

Pulling water hoses out of pit. Wire was exposed and ran it through his thumb

EE WAS CHANGING ENGINE OIL IN THE SHOVEL. HE TURNED AROUND AND BUMPED HIS ELBOW ON THE TRACK.

HELPING MECHANIC LOOSEN NUT AND ALL THREAD ON THE D11 DOZER. NUT LOOSENED ATT AT ONCE AND ALL THREAD CUT HIS FINGER.

CHANGING SUCTION PLATE ON GIW PUMP, ROTATED PLATE AND IT CUT AND MASHED RING AND MIDDLE FINGERS ON LEFT HAND.

EE WAS BENDING OVER TO PICK UP A PUMP HOSE AND HIS LOWER BACK POPPED, CAUSING GREAT PAIN. HE HAD NOT EVEN PICKED UP THE HOSE YET.

MOVING ELECTRIC HEATERS, HEATER SLIPPED & SMASHED FINGER BETWEEN HEATERS CUTTING FINGER.

HE WAS CHANGING THE TEETH ON THE LOADER'S BUCKET WHEN A PIECE OF STEEL BROKE OFF AND FLEW IN HIS EYE.

HE WAS MOVING THE LIGHTPLANT AND WENT TO UNHOOK IT AND THE JACK KICKED OUT HE CUT HIS FINGER ON HIS LEFT HAND.

OUR WELDER WAS CUTTING ANGLE IRON GUARD OFF OF TRUCK SCALE, AND EE WAS STANDING DOWN ON GROUND BELOW, WHEN THE ANGLE IRON WAS CUT IT FELL, HITTING HIM ON OR ABOVE THE RIGHT KNEE.

SMASHED LEFT THUMB IN DOOR.

SNOW AND ICE, REMOVING A WINDSHIELD WIPER FROM A DOZER BEING PARTED OUT.

MOVING KEGS OF GREASE FROM GREASE TRUCK TO SHOVEL.

REMOVING BUCKET LIP SAVER ON SHOVEL AND CAME OUT AND LANDED ON LEFT HAND.

DARK, USING FLOOD LIGHTS FROM TRUCK TO SEE. LEANING AXLE AGAINST MACHINE INSTEAD OF LAYING IT DOWN.

IT WAS DAR AND EEE WAS TRYING TO HURRY TO GET CRUSHR FIXED. SHOULD HAVE LOOSENED BRACKETS BEFORE TRYING TO PUT BELT ON.

AREA WAS MUDDY: SHOVEL ON UNEVEN GRADE

EMPLOYEE WAS INSTALLNG A BELLY PAN ON DOZER, WHEN THE CABLE FROM THE BOOM ON SERVICE TRUCK BROKE CAUSING THE BELLY PAN TO FALL LANDING ON THE EMPLOYEE'S RIGHT KNEE.

SHOLVELING COAL OUT FROM UNDER BREAKER WHEN BACK CAUGHT & COULD NOT STAND UP VERY WELL.

WAS LIFTING A STARTER THAT WAS GREASY UP INTO THE MOTOR AREA OF THE 988B LOADER WHEN IT SLIPPED OUT OF HIS HANDS, FALLING ON RIGHT LEG AT KNEE AREA.

EMPLOYEE WAS MOVING A 6" SUCTION HOSE, DROPPED HOSE LANDING ON TOP OF FOOT. A REINFORCEMENT WIRE FROM THE HOSE PUNCTURED TOP OF FOOT.

OPERATOR WAS CLEANING TRACK ON A LINKBELT D110 BACKHOE. WHEN OPERATOR BENT OVER TO REMOVE SOME LODGED MATERIAL IT CAUSED HIS BACK TO STRAIN.

EMPLOYEE WAS CLEANING COAL UP AROUND CONVEYOR WHEN HE BUMPED HIS HARD HAT ON BOTTOM OF CONVEYOR KNOCKING HARD HAT OFF. WHEN HE BENT DOWN TO GET IT HE BUMPED HIS HEAD ON THE CONVEYOR CUTTING TO P LEFT OF THE HEAD.

INSTALLING GEAR REDUCING MOTOR ON CONVEYOR BELTTHE CHAIN HOLDING GEAR REDUCER BROKE CAUSING ONE END OF GEAR REDUCER TO SWING STRIKING EMPLOYEE ON TOP PORTION OF UPPER RT LEG

EE WAS BLOCKING END DUMP TO REMOVE TIRES. WHILE MOVING BLOCKS FROM STACK TO END DUMP, BACK OR RIGHT HAND HIT END DUMP.

CLEANING TAIL GATE ON PIT TRUCK. TAIL GATE CAME FREE SMASHING MIDDLE FINGER OF LEFT HAND.