Buscar en el registro

Left eye of miner/welder appears red, irritated, slightly swollen.

EMPLOYEE WAS IN AN AREA OF THE MACHINE WHERE HE WAS NOT SUPPOSE TO BE AT, THE OPERATOR DID NOT SEE HIM. AS THE CARRIAGE WAS MOVING FORWARD TO GET ANOTHER FLIGHT, THE EE POSITIONED HIMSELF BETWEEN A STATIONARY LIFT JACK & THE MOVING CARRIAGE WHICH PINCHED HIM & FRACTURED HIS PELVIS. THE OPERATOR HEARD HIM YELL & STOPPED THE CARRIAGE.

EE WAS RIDING ON THE SALEM AUGER WHILE A LOADER PULLED & A DOZER PUSHED THE MACHINE UP OUT OF THE PIT. THE PIN HOLDING THE HITCH TO THE LOADER BROKE CAUSING THE AUGER TO TILT FORWARD DROPPING ABOUT FOUR FEET. THE FALLINGOF THE MACHINE JARRED THE EE'S NECK, BACK AND RIGHT SHOULDER WHEN IT LANDED.

EE WAS CLEANING RUST OFF AIR BAG BRACKET WITH AN AIR GRINDER WHEN THE WHEEL CAME APART AND STRUCK EE IN THE LEFT ARM. THE LACERATION REQUIRED SUTURES.

EE WAS USING AN AIR HOSE TO BLOW DEBRIS OFF THE BUMPER OF HIS TRUCK WHEN A PIECE OF METAL/DIRT FLEW INTO HIS LEFT EYE. WENT TO DR. TO GET FOREIGN OBJECT REMOVED.

WHILE STRIPPING OFF OVERBURDEN WITH DOZER AND PRYING ON LARGER ROCKS, ONE OF THE ROCKS BROKE LOOSE AND CAUSED HIS DOZER TO SURGE FORWARD CAUSING A JOLT TO THE OPERATOR AND SPRAINING HIS BACK.

EE WAS USING A GRINDER WITH A WIRE WHEEL TO CHIPOFF PAINT ON A PORT SO HE COULD WELD IT. ONE OF THE WIRES FROM THE WHEEL BROKE LOOSE & WENT INTOHIS RIGHT FOREARM. HE DIDN'T NOTICE IT FOR A FEW DAYS & THEN BEGAN TO HURT. HE WENT TO THE DOCTORTO HAVE IT REMOVED.

EE WAS OPERATING TEREX PAN IN SPOIL AREA WHEN THE PAN SLID OFF A SMALL FROZEN BERM AND JARRED THE EMPLOYEE. HE DID NOT NOTICE ANY PAIN UNTIL HIS DRIVE HOME AFTERWORK. HE DID NOT MISS ANY WORK.

EMP WAS DRIVING THE FORK LIFT TO MOVE A MOTOR DURING REPAIR. MOTOR STARTED TO SLIP OFF THE FORKLIFT. INJURED WENT TO STEADY IT. MOTOR FELL TO THE GROUND SMASHING INJUREDS FINGER.

CONTRACTED MECHANIC WAS REPAIRING A TRACK ON A DOZER WHEN THE GRINDING WHEEL CAME APART AND THE WHEEL HIT HIS RIGHT LEG APPROX. 2" BELOW THE KNEE CAUSING A CUT WHICH REQUIRED 2-3 STICHES.

EMPLOYEE WAS HELPING TO MOVE THE AUGER MACHINE AWAY FROM THE HIGHWALL WHEN HE SLIPPED & GRABBED FOR THE MACHINE & HIS FINGERS WENT INTO THE FAN BLADE OF THE ENGINE BLADE JUST CAUGHT THE EDGE O F MY FINGERS AROUND THE 1ST KNUCKE JOINTS THE PIT HAD 1-2 FEET OF WATER IN IT AT THE TIME

EMPLOYEE WAS REMOVING AUGER FLIGHTS FROM A DRILLED HOLE WHEN THE PULLING ROD JERKED OUT OF HIS HAND & HIT HIM HIS RT LEG WORKED FOR 4 DAYS AFTER ACCIDENT UNTIL THE PAIN & SWELLING GREW TO BE T OO MUCH & THEN HE WENT TO GET IT XX

HE WAS CLEANING PARTS WITH STEAM JENNY WHEN HE REACHED DOWN TO TURN OVER END SPRAYED HIS LEFT AHND AND WRIST CAUSING SECOND DEGREE BURNS.

THE HURT MAN WAS PUTTING OIL INTO THE MAIN ENGINE OF AN AUGER MACHINE WHEN THE AUGER OPERATOR MOVED THE CARRIAGE FORWARD, NOT REALIZING THAT THE HURT MAN WAS IN THE POSITION WHICH CAUSED HIM T O GET PINNED BETWEEN THE CARRIAGE AND JACK.

AUGER OPERATOR RETRUNING CARRIAGE TO ALLOW ANOTHER FLIGHT TO BE PUT ON MACHINE TO AUGER COAL.HE LEFT CONTROLS AND PROCEEDED TO REAR OF MACHINE TO GET DRINK OF WATER WHEN CARRIAGE REACHED FULL BACK POSITION IT TRAPPED HIS FOOT BETWEEN CARRIAGE AND AUXILLARY ENGINE.

OPERATING DOZER DOZER SLIPPED OFF ROCK JARRED OPERATOR WHILE IN SERT IN CAB TWISTING OPERATORS BACK AND HARRING OPERATOR.

WELDER WAS USING A FLOOR MOUNTED GRINDER TO GRIND OFF SOME AUGER PIN PUNCHES WHICH HE MADE, HE LOST CONTROL OF ONE OF THE PUNCHES WHILE GRINDING AND RAN HIS THUMB INTO THE GRINDING WHEEL, WHEN THE PUNCH GOT STUCK BETWEEN WHEEL AND TABLE