Buscar en el registro

Injured was running D9L dozer, when he tracked over large rock causing him to be jarred around. No doctor visit or lost time until March 18th 2015

1 of 3 drive belts broke, injured shut motor down, dismounted the crusher and approached the large pulley driving the crusher in the hopper. Pulley had slowed down but had not totally stopped rotating yet. Reached around from behind the guard to grab the broken belt from the back when the remaining 2 belts caught his arm between them and the pulley causing a fracture.

While hauling overburden, the injured was backing up for the shovel to load him and the shovel bucket hit the bed of his end dump truck, jarring and straining the injured's neck. He missed one full shift and went home early during another shift.

While steam cleaning a piece of equipment, the injured accidently squeezed the trigger of the wand and hit the right side of his right foot. The outside of the foot received 1st and 2nd degree burns.

WHILE SEALING THE HIGHWALL WITH THE HOE BUCKET, THE INJURED'S HOE SLIPPED ON THE WALL, JERKING THE OPERATOR & STRAINING HIS BACK.

WHILE WELDING AND GRINDING ON A 773 END DUMP TRUCK FRAME, A PIECE OF METAL LODGED IN HIS EYE. HE WAS UNAWARE UNTIL 1-20 WHEN IRRITATION SENT HIM FOR MEDICAL HELP TO REMOVE A PIECE OF METAL. RE CEIVED A PRESCRIPTION FOR PAIN PILLS.

WHILE BACKING HIS DOZER, THE INJURED BACKED OVER A RISE AT THE REAR CAUSING HIM TO HIT HIS HEAD ON THE BACK OF THE DOZER AND HIS CHEST. HE RECEIVED STITCHES IN HIS HEAD AND BRUISED HIS CHEST.

WHILE HELPING TO MOVE POWER CABLE, THE INJURED GOT HIS FOOT CAUGHT IN A LOOP OF CABLE BEING PULLED BY A BULLDOZER CAUSING A SPRAIN TO HIS RIGHTANKLE.

WHILE WORKING ON THE CENTER PIN OF THE DRAGLINE,THE GRINDER HE WAS USING KICKED BACK AND HIT HIMIN THE CHIN AND LIPS REQUIRING STITCHES, RETURNED TO WORK AFTER GOING TO THE DOCTOR.

WHILE DRILLING THE ROOF FOR ROOF BOLTS IN AN UNDERGROUND RECOVERY EFFORT, THE INJURED S HAND STURCK A ROOF BOLT PLATE AND CUT HIS FINGER REQUIRING 10 STITCHES.

THE INJURED CALLED IN ON 5-26-99 TO ADVISE HIS BACK WAS HURTING IN THE SAME AREA HE HAD PREVIOUSLY HURT IT LAST YEAR. NORMAL WELDING ACTIVITIES CAUSED THE SORENESS.

THE INJURED DID NOT SHOW UP FOR WORK FROM 4/26/99 ON. THE CO. FINALLY TALKED TO HIM ON 4/29/99. HIS TAILBONE WAS VERY SORE, HE HAD NO EXPLANATION FOR WHAT CAUSED IT BUT HIS NORMAL JOB ACTIVITI ES.

THE INJURED CAME INTO WORK ON 4-22-98 AM AND COMPLAINED OF SOMETHING IN HIS EYE. HE WAS SENT TO THE DR WHO GAVE HIM EYE DROPPS AND TIME OFF TO HEAL. WAS OFF 4-22-4-23.

WHILE USING A HAND GRINDER A PIECE OF METAL GOT IN HIS EYE. FINISHED THE SHIFT AND WORKED TWO MORE DAYS BEFORE REPORTING INJURY WENT TO DR TO HAVE FRAGEMENT REMOVED AND MISSED TWO DAYS WORK. H AD TWO FOLLOWTIP VISITING TO DR TO BE CHECKED.

THE INJURED AND A SECOND WELDER WERE BOTH GRINDING OVERHEAD AND WERE WEARING SAFETY GLASSES. A PIECE OF METAL GOT BEHIND THE GLASSES AND EMBEDDED INTO HIS EYE. A DR. REMOVED IT.

WHILE USING A SKILL SAW CUTTING SKIRTING FOR THE OFFICE TRAILER, A METAL FRAGMENT GOT IN HIS EYE CAUSING DISCOMFORT.

IT IS BELIEVED THAT WHILE WORKING ON A DRAGLINE, THE INJURED GOT A PIECE OF METAL IN HIS EYE.

WHILE GRINDING ON THE PAGE DRAGLILNE, A PIECE OF METAL STRUCK HIM IN THE RIGHT EYE CAUSING DISCOMFORT.

WHILE GRINDING ON A PIECE OF METAL, THE GRINDER SKIPPEDON AN UNEVEN SURFACE AND STRUCK THE INJURED ON THE LEG REQUIRING 10 STITCHES.

EE WAS PRESSING EQUALIZER BAR CENTER. AN OUT-PULLER BOLT THREADS PULLED AND CYCLINDER AND BOLT FLEW OFF. SOMETHING HIT HIM IN THE LEFT SIDE OF THE FACE, CUTTING A GASH THROUGH EYEBROW.

WHILE OPERATING HIS BULLDOZER, THE INJURED HIT A ROCK AND THE SEAT BOTTOMED OUT JARRING HIM CAUSING DIARRHEA, HEMROIDS AND BLOOD CLOTHS.

WHILE HELPING TO START A 6"DIESEL WATER PUMP, THE PUMP BACKFIRED & BLEW THE AIR FILTER OFF, STRIKING THE INJURED ON THE FOREHEAD, REQUIRING 6 STITCHES.

WHILE GRINDING ON A DRAGLINE TOOTH SHANK (BUCKET), THE GRINDER KICKED BACK AND STRUCK HIS LEG REQUIRING STITCHES.

WHILE OPERATING THE DRAGLINE, MUD SPLASHED FROM THE BUCKET THROUGH AN OPEN WINDOW INTO THE CAB, HITTING THE INJURED IN THE EYE CAUSING A SCRATCH.

WHILE USING A HAND HELD GRINDER, THE GRINDER KICKED BACK AND CUT THE EE'S ARM REQUIRING THREE STITCHES. NO LOST TIME EXCEPT TO DOCTOR FOR STITCHES.

WHILE CUTTING WITH A TORCH, THE INJURED HAD A PIECE OF HOT MATERIAL POP, THROWING A PIECE OF MOLTEN METAL INTO HIS EYE BEHIND HIS SAFETY GLASSES. THE INJURED RECEIVED A BURN CAUSING A BLISTER ON THE EYEBALL.

HE WAS WORKING ON THE THROTTLE OF HIS WELDER AND HIS HAND SLIPPED AND THE FAN OF THE ENGINE CUT HIS FINGERS.

WELDER BURNED EYES. WELDING ON DRAGLINE BUCKET AT THE SHOP.

HE DOESN'T REALLY KNOW WHAT OR HOW IT HAPPENED. WED. AFTERNOON, HIS LEFT EYE FELT IT HAD SOMETHING IN IT. HE CLEANED IT OUT AND DIDN'T SAY ANYMORE UNTIL FOLLOWING TUSESDAY 2-26-91 WHEN I TOO K HIM TO THE DR.

OPERATING D6 DOZER, PUSHING ROCK. WHEN DOZER BROKE OVER ROCK, OPERATOR HEAD AND TEETH WERE SNAPPED FORWARD, CAUSING HIM TO BREAK OUT TWO FRONT TOP TEETH.

WORKING ON TUB OF DRAGLINE STANDING IN TUB HOLE CUTTING HOLE AROUND HIM, PANTS LEG CAUGHT ON FIRE BURNS TO LOWER BACK OF L LEG

WORKING ON THE NORTH END OF SHOP ON A CATERPILLER DOZER WITH A 1" IMPACT WRENCH WHEN A PIECE OF METAL FLEW OFF OF THE SOCKET AND LODGED IN HIS RIGHT EYE.