Buscar en el registro

The remote control for the continuous miner would not function due to a weak battery. The employee placed the miner in "manual" to move it. When he started to tram the miner, it caught him between the miner and the rib.

MBC operator backed up from miner that was in #7 heading stopped MBC 8ft inby 6 to 7 brk. Didn't inform anyone that he was going to install cover on front of MBC. Miner operator backed up to intersection, swung miner around to go into 6 to 7 brk. struck operator on left shoulder.

Employee was using a hand held electric metal cutting saw to cut a piece of metal. The saw kicked back and struck employee on the upper leg.

Drill steel got hung in drill hole. Was pulling steel out of hole, with a lot of down force. Struck ring finger on left hand, between steel and drill head.

SECTION ELECTRICIAN WAS ADJUSTING HEAD ON ROOF BOLTER & BEING HELPED BY CO-WORKER. BOOM WAS RAISED & EE'S FINGERS ON HIS LT. HAND WERE CAUGHT BETWEEN ARM ON BOOM & FRAME OF MACHINE.

WAS SAWING A TIMBER. PIECE OF ROCK FELL OFF EDGE OF ROOF PLATE STRIKING END OF RING FINGER AND MIDDLE FINGER, LEFT HAND.

A ROCK FELL ON EMPLOYEE'S HAND WHILE HE WAS PINNING TOP.

WHILE TRAMMING MINER TO FACE, MINER TEEDEN-TOODER OVER HUMP CAUSING OPERATOR TO HIT TOP WITH HEAD JAMMING NECK

SMASHED FINGER WHILE INSTALLING BOLT.

HAND ON DRILL HEAD & HEAD LEVERS STUCK.

TWISTED KNEE WHILE BOLTING TOP.

ROCK FELL WHILE BOLTING TURN IN ON LOWER BACK WHILE INSTALLING CORNER BOLT.

ROOF FAILURE WHILE INSTALLING BOLT ROCK FELL ON HAND.

BOLTING TOP STARTING FIRST HOLE AND ROCK FELL FROM TOP AND FELL ON HAND.

RIDER IN ROOF APPROX 26" THICK, ROOF CONDITION SLUGGING ROOF.

WAS PINNING TOP, PIECE OF ROCK FELL OUT BETWEEN BOLTS, HITTING LOWER BACK.

MASHED THUMB BETWEEN ROOF BOLT PLATE AND HEAD ON MACHINE WHEN INSTALLING A ROOF BOLT.

WAS PINNING TOP AND STRAINED BACK.

HE HAD INSTALLED HIS FIRST ROOF BOLT IN THE WORKING PLACE. HE WAS GETTING READY TO MOVE THE MACHINE & INSTALL THE SECOND BLOT, WHEN A SMALL PIECE OF ROCK FELL FROM EDGE OF RIB & HIT RIGHT ANKL E. IT CRACKED A BONE. HE WORKED THE REST OF SHIFT, THOUGHT IT WAS JUST BRUISED.

WHILE CUTTING CORNER IN 2 HDG GOT RIPPERS INTO VENTILATION TUBING, STRIKING DILLION SEVERAL TIMES ABOUT HEAD, BEFORE CUTTERS STOPPED.

OPERAT OR REPOSITIONING ROOF BOLTER ROM CENTER VALUE CHEST RELEASED TRS & RAISED FRONT BOOM CATCHING LEFT HAND ON PIVOT POINT OF MAIN FRAME & FRONT BOOM EMPLOYEE DID NOT REPORT INJURY TIME OF ACCIDENT

WHILE TRAMING MACHINE AROUND TURN SWING JACK BROKE AND HEAD SWUNG AROUND HITTING HIM.

HE WAS GOING TO GET ANOTHER BOLT WHEN THE ROCK STRUCK HIM IN THE BACK.SHOULDER AREA.

HE SARTED DRILLING HOLE FOR OUTSIDE BOLTS AND ROCK BROKE OUT AROUND DRILL STEEL AND CAUGHT FOOT. THE ROCK SLIDE OFF THE CANOPY AND BROKE IN 3 OR 4 PIECES AND CAUGHT HIS FOOT.

PUTTING UP BOLT BOLT CAUGHT ON GLOVE TWISTED HAND BEFORE HE KNEW WHAT HAPPENED

GOT OUT OF DECK OF MINER TO MOVE CABLE.REACH INTO DECK TO TRAM MINER AND TRAM LEVER STUCK OR ONLY ONE SIDE TRAMMED.PINNED INJURED BETWEEN MINER AND RIB.

EMPLOYEE WAS GETTING READY TO DRILL HOLE FOR HIS FIRST BOLT IN THE SECOND ROW OF BOLTS WHEN A ROCK FELL ON HIS BACK.

RAISING HEAD ON ROOF BOLTER CAUGHT HAND BETWEEN HEAD AND TOP.

LOADING RIGHT LIFT ON PILLAR-L.N. BOOM OVERSIDE OF SHUTTLE CAR-LARGE LUMP OF COAL CAUGHT BETWEEN MINER BOOM AND TOP-LUMP BROKE LOOSE COMING ACROSS SHUTTLE CAR INTO OPERATORS DECK STRIKING INJU RED ON LEFT HAND.

EMPLOYEE WAS BOLTING T OP-PIECE OF ROCK FELL & SLID DOWN HIS RIGHT SIDE & HIP

ROOF BOLT ER INSTALLING OUT SIDE CORNER PIN IN 1ST CUT IN #6 HDNG HAD HAND OVER TOP HEAD WHEN STEEL SLIPPED OFF & HEAD CONTINUED UPWARD & CAUGHT THUMB

WAS PREPARING TO DRILL HOLE AND INSTALL ROOF BOLT. PIECE OF ROCK BROKE LOOSE STRIKING I.NAME ON LEFT LEG.

OPER PINNING TOP WITH TWIN HEAD RMS BOLTER OPER HAD I NSTALLED RIB BOLT SWUNG HEAD TO INSDIE TO INSTALL NEXT BOLT ROCK APPROX 50 27 8 IN TRIANLGLE SHAPE FELL FROM ATRS AND FROM CANOPY TO RIB HITTING BACK OF SPLINT ON SENT MAN TO HOSP SM BONE IN LEG WAS BROKEN AND CALF MUSCLE BRUISED.

PREPARING TO SW3NG DRILL HEAD OUT-HIT KNEE

MAKING UP ROOFB2LTS OPERATOR PULLED UPTO INSTALL ANOTHER ROW OF BOLTS.CAUGHT LEFT FOOT.

WAS PREPARING T2 DRILL HOLE IN 6 TO 7 BRK. SMALL PICE OF ROCK HIT FINGER ON L HAND

WAS PINNING TOP3HIT RT ELBOW ON MACHINE

WAS CUTTING A P3ECE OF METAL AT TIPPLE WENT TO REPOSITION HIS SELF TORCH ANGLED UP GLOVE CUFF AND BURNT RT WRIST

WAS DRILLING HO5ES IN TRUCK FRAME AND SMALL FRAGEMENT BOUNCED INTO MY EYE

HURT RIGHT KNEE

MASHED HAND BETWEEN TWO PIECES OF STEEL

WAS DRILLING HOLE IN LAST ROW OF BOLTS SMALL SLUG FELL FROM EDGE OF DRILL STEEL

ROCK FELL OUT OF TOP AND HIT MAN ON THUMB WHILE HE WAS PUTTING PIN IN HOLE.

WAS HANDLING PINNER CABLE. MOVING FROM #1 TO #2. FRONT TIRE OF PINNER CAUGHT HIS LEFT FOOT.

ROCK FELL OFF EDGE OF TRS AND HIT ON KNEE.