Buscar en el registro

HE WAS DRILLING A HOLE IN THE ROOF AND STEEL GOT HUNG UP IN TOP. HE TRIED TO GET STEEL OUT AND HIT THE WRONG LEVER ON VALVE AND HAND GOT CAUGHT BETWEEN DRILL STEEL AND THE TOP.

TORQUEING RESIN ROOF BOLT AND GROUT CAME OUT OF DRILL HOLE OVER PLATE AND GOT IN HIS EYES.HAPPENED AT #4 ENTRY FACE AREA-B SECTION.

HE WAS HELPING ON INTAKE BOLT MACHINE & A PC OF DRAW ROCK FELL BURST & A PC HIT HIM INJURYING HIS LEFT CHEST RIBS & LEFT KNEE HAPPENED IN 404B SECTION AT CROSSCUT IN #2 ENTRY

PUTTING BOLT IN HOLE PAIN IN L ARM

HE WAS INSTALLING A 48" RESIN BOLT W/A DRILL WRENCH WHEN THE BOLT BENT, PINCHING HIS LEFT ARM BETWEEN THE DRILL WRENCH AND THE ATRS.

EE WAS HELPING ON ROOF BOLTER AND WAS PLACING A COLLAR OVER A HILL SEAM. THE ROOF BOLTER OPERATOR PUSHED THE COLLAR AGAINST THE TOP WITH THE HEAD OF THE BOLT MACHINE AND CAUGHT HIS ARM AGAINST STRAPS PUT UP. IT CAUGHT HIS LOWER LEFT ARM.

HE WAS HOLDING ROOF BOLT AGAINST HEAD OF BOLT MACHINE TO PUSH UP BOLT AND CAUGHT FOLDED UP AND MASHED LEFT RING FINGER.

EMPLOYEE WAS BOLTING UP REFUSE PIPE-INJURED WAS STANDING NEXT TO CONCRETE WALL-REFUSE PIPE PINNED HIS LEFT KNEE AGAINST WALL.

WAS DRILLING WITH FLETCHER BOLTING MACHINE AND A PIECE OF ROCK GOT IN HIS RIGHT EYE.

A PIECE OF DRAW ROCK FELL AND HURT HIS RIGHT SHOULDER.

GETTING DRILL STEEL OUT OF TOP AND CAUGHT LITTLE FINGER ON RIGHT HAND.HAPPENED AT FACE OF B-SECTION.

HE WAS USING A TORCH AND HOT METAL POPPED IN HIS RIGHT EYE.,

HE WAS WELDING ON MINER AND A PIECE OF SLAG FROM WELDING FLEW AND HIT HIS LEFT EYELID. HE ALSO INJURED HIS LEFT KNEE WITH MINER CABLE.

TWISTED HIS BACK WHILE HOLDING BARREL ON BENCH GRINDER.

BOTTOM PART OF DRILL STEEL FELL BACK,HITTING HIM IN THE EYE.HAPPNED AT #4 HEADING-404B SECTION.

HE WAS OPERATING A GALIS 300 ROOF BOLTER WHEN IT RAN OVER A ROCK, CAUSING THE DRILL HEAD OF THE MACHINE TO HIT HIS LEG.

EMPLOYEE WAS CUTTING ANGLE IRON, WHEN A CHUNK OF HOT METAL LANDED ON TOP OF HIS RIGHT BOOT CAUSING A BURN TO HIS FOOT. EMPLOYEE WENT TO DOCTOR AND MISSED 1ST DAY OF WORK ON 5-8-90.

LET DRILL HEAD OF ROOF BOLTER DOWN ON LEFT FOOT.

HE WAS HELPING OPERATE A GRIP HOIST WHEN THE LEVER SLIPPED, CAUSING HIM TO JERK AND HURT HIS LEFT SHOULDER.

LET HEAD DOWN ON R SIDE OF BOLTER KICKED BACK CUT OVER R EYE

BOOM OF COAL DRILL CAME AROUND AND STRUCK HIM IN HEAD.

EMPLOYEE WAS DRILLING WITH A WAGON DRILL AND RIGHT GLOVE HUNG ONTO GLOVE HUNG ONTO BARREL, INJURING HIS RIGHT HAND.

HE WAS PUTTING UP ROOF BOLTS WHEN A ROCK ABOUT 4 INCH THICK X 12 INCH LONG FELL ON HIS LEFT ARM.

CUT HIS LEFT HAND WITH A HAND GRINDER.

BOLTING TOP AND PIECE OF ROCK FELL & CUT HIM ABOVE HIS LIP AND KNOCKED OUT A TOOTH.

THE INJURED WAS CUTTING ON A PIECE OF STEEL NEXT TO (NAME),SOMETIME DURING THE DAY INJURED RECEIVED A WELD FLASH,BURNING HIS EYES.ALSO A PIECE OF WELD SLAG POPPED OFF BURNING HIS LEFT EYE IN A

EMPL WAS IN PROCESS OF REMOVING ALCOSORB HOPPER FROM PLANT WITH CRANE. CRANE CABLE WAS OUT OF SHEAVE IN TRYING TO REMOVE SLACK OUT OF CABLE & GET IT BACK IN SHEAVE EMPL HAD HAND ON LIVE END OF CABLE & SLACK WENT OUT OF CABLE PULLING RIGHT HAND INTO SHEAVE.

I NAME WAS WELDING A BASE PLATE ON BOTTOM OF A FEED PAN TO A JIG A WELD SPLADER OR HOT SLAG CAME DOWN ON IS ARM BURNING A SMALL PLACE ON HIS LEFT ARM JUST BELOW ELBOW THE BURN CAUSED BLOOD PO ISION

WENT TO MOVE HEAD OUT ON ROOF BOLTER AND TWISTED HIS RIGHT KNEE-SAYS HE FIRST HURT HIS KNEE ON 07-31-89,BUT DID NOT GO TO DOCTOR OR MISS WORK UNTIL 08-28-89-THIS IS WHEN THE ACCIDENT REPORT WA S RECEIVED IN THE SAFETY DEPARTMENT.AUGUST 28,1989 WAS FIRST DAY OF WORK HE MISSED.

A ROCK FELL & STRUCK I NAME WHILE BOLTING IN #3 HEADING FACE

DRAW ROCK FELL,STRIKING HIM ON HEAD.ROCK WAS 8'LONG X 4'WIDE X 6"THICK.HAPPENED AT FACE OF #4 ROOM.

WHILE BACKING TOOL ACROSS WORK PIECE AFTER CUT WAS COMPLETED, A FINE SCRAPPING OF METAL WAS THROWN IN RIGHT EYE.

BOLTING TOP WHEN SM PC OF DRAWROCK FELL OUT STRIKING HIM ON L. SIDE OF FACE RESUTING IN LACERATION HAPPENED IN FACE AREA OF B SECTION.

EMPL BOLTING TOP -PUT WEIGHT ON LEFT KNEE CAUSING STRAIN.OCCURRED AT #4 HEADING.

EMPLOYEE WAS HELPING INSTALL IMPELLOR ON PUMP, WHEN THE IMPELLOR SLIPPED FROM CRANE AND LANDED ON HIS UPPER LEFT LEG.

PUTTING UP ROOF BOLTS TWISTED AROUND HIT BOLTING MACHINE AGAINST RIB CAGE

WAS USING GRINDER & GOT PIECE OF METAL IN RIGHT EYE.

CAUGHT HIS ARM BETWEEN BOOM AND ATRS OF ROOF BOLTER.

WAS BOLTING TOP AND STARTED TO SWING HEAD OF ROOF BOLTER AND CAUGHT HIS LEFT LITTLE FINGER BETWEEN HEAD OF DRILL AND FRAME OF ROOF BOLTER HAPPENED AT FACE AREA

EMPLOYEE WAS BOLTING TOP & DRILL STEEL THREW A SMALL PIECE OF SANDSTONE INTO HIS EYE

HE WAS HOLDING UP A SHORT STRAP AGAINST ROOF DRILL TO TIGHTEN AGAINST ROOF AND DRILL HEAD STARTED SPINNING AND T HE STRAP SPUN ALSO AND STRAP HIT HIM ON LEFT SIDE OF HEAD

EMPLOYEE WAS USING ELECTRIC HAND DRILL & BIT STUCK & CAUSED DRILL TO MASH RIGHT INDEX FINGER

EMPLOYEE WAS TRAMMING ROOF BOLTER FROM DECK, WHEN IT RAN OVER A ROCK AND JOLTED HIM CAUSING PAIN IN HIS BACK.

EMPLOYEE WAS DRILLIING A PIECE OF METAL AND DRILL BIT HUNG IN METAL AND METAL TWISTED AROUND CATCHING LEFT THUMB

INJURED WAS GUIDING THE 45 INTO PLACE HE TOLD WITNESS TO PICK UP ON THE CRANE AND STOP THE CRANE BRAKES FAILED AND INJURED COULDN'T SEE HIS HAND ON THE BACK SIDE OF THE PIPE AND HIS MIDDLE FINGER ON HIS RIGHT HAND GOT CAUGHT BETWEEN THE 45 AND THE PUMP

EMPLOYEE WAS OPERATING ROOF BOLTER AND HIT KNEE.

EMPLOYEE WAS HOLDING HIS ARM UP TO HOLD AIR LOCK UP AND HIS ARM CAUGHT IN AIR LOCK CURTAINS AND PULLED HIM INTO THE BACK SEAT OF THE THREE WHEELER.

EMPLOYEE WAS WELDING AND A PICE OF SLAG FLEW INTO LEFT EYE.

EMPLOYEE WAS BOLTING TOP AND A PICE OF DRAW ROCK FELL ON HIS HAND EMPLOYEE WAS AT #2 HEADING.

HE WAS BOLTING TOP AT FACE OF #1 ENTRY AND A SMALL FLECK OF ROCK GOT INTO HIS LEFT EYE.