Esta búsqueda
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
WHILE HELPING TWO WELDERS HOLD DOWN A BEAM TO BE WELDED, EE GOT WELDER'S FLASH TO HIS EYES. EE WAS NOT WEARING REQUIRED SAFETY GLASSES.
A 3/8"CHAIN WAS HOOKED TO THE BELLY-PAN ON DOZER. THE CHAIN WAS ATTACHED TO THE HOIST CABLE. THEHOIST CRANE ON THE MECHANIC TRUCK WAS BEING USEDTO LIFT THE BELLY-PAN INTO PLACE, WHEN THE CHAIN S HOOK LET LOOSE. THE BELLY-PAN FELL ONTO THE EE'S RT. LEG.
EE WAS SHIFTING BARGE WHEN A TIE OFF ROPE SNAPPED STRIKING HIS RIGHT FOOT.
WHILE SPREADING TOPSOIL WITH A CATERPILLAR 657 PAN AT THE REHM ROAD PIT, EE FELT A SHARP PAIN IN HIS LOWER BACK. COAL PRODUCTION HAS BEEN COMPLETED AT THE PIT. RECLAMATION WORK IS CURRENTLY BE ING DONE AT THE LOCATION.
EE WAS WELDING ON A BOAT RUBDDER. THE RUDDER NEEDED TO BE TURNED OVER. OTHER EE WAS HELPING TO LIFT THE RUDDER WHEN I FELT A PULL IN MY LOWER BACK.
EE WAS WORKING NEAR A 6" WATER PUMP. THE WATER PUMP OVERHEATED CAUSING DISCHARGE HOSE TO BLOW-OUT HOT WATER, WHICH SPRAYED ONTO THE EE'S BACK, WAIST AND LEGS CAUSING 1ST AND 2ND DEGREE BURNS.
EE WAS PUTTING A PIN IN A HYDRAULIC JACK WHEN HE CUT AND MASED LEFT THUMB.
EMPLOYEE WAS ADJUSTING THE CLUTCH ON THE GOB BIN LOAD OUT DOOR HE WAS USING A 7/16 WRENCH TO ADJUST THREE 1/4 IN BOLTS HE FAILED TO LOCK OUT THE CONTROLS A GOB TRUCK DRIVER OPENED THE DOOR THE CLUTCH MOVEMENT JAMMED THE OPEN END OF THE WRENCH INTO EMPLOYEES RT HAND
EMPLOYE WAS SAND BLASING A CONVEYOR BELT LINE HE DIDNT REALIZE THERE WAS A KINK IN AIR HOSE WHEN HE TURNED THE AIR PRESSURE ON NOZZLE SLIPPED FROM HIS GRIP NOZZLE STRUCK & CUT HIS RT.LEG JU ST BELOW THE KNEE
OPERATOR WAS SPREADING TOP SOIL WITH A DOZER. THE TOP SOIL WAS PILED NEAR THE TREE LINE, THE OPERATOR HAD BACKED INTO THE SAME SPOT IN THE TREE LINE FOUR OR FIVE TIMES A TREE LIMB APPARENTLY CAUGHT ON THE ROPS WHEN THE DOZER MOVED FORWARD IT CAUSED A WHIPPING ACTION THE LIMB KNOCKED A REAR WINDOW OF THE DOZER INTO THE DOZER OPERTATOR CUTTING THE OPERATOR LEFT ARM
EE WAS USING A DRILL HOLE SAW ATTACHMENT. HE WAS DRILLING A 3 3/8 HOLE THRU INSULATED SIDING. AS HE DRILLED THRU THE SAW CAUGHT CAUSING THE DRILL TO TWIST. BEFORE HE COULD RELEASE THE TRIGGER THE DRILL TWISTED HIS RIGHT HAND BREAKING 2 BONES IN H IS HAND.
WITNESS WAS CLEANING THE PAINT SPRAYER WITH ACETONE THE VICTIM CAME ALONG GRABBED THE SPRAY GUN AND PUT A NEW TIP ON IT IMPROPERLY THE VICTIM THE PRESSED THE TRIGGER SINCE THE TIP WAS NOT INS TALLED PROPERLY THE WITNESS HAD ADVISED THE VICTIM TO LEAVE THE PAINT SPRAYER ALONE
HOISTING FLIGHTS-160 LBS-FROM DRAG TANK AT WASH PLANT.HOIST HOOKED INTO ...PLAYTE WELDED TO A BEAM-INSTALLED FOR THIS PURPOSE 3 YRS AGO.HOIST HOOK HOOKED THRU HOLE IN PLATE.PLATE BROKE ALLO WING HOIST TO FALL ABOUT 6\ AND STRUCK EMPL ON HEAD.EMPL HARD HAT PREVENTED SERIOUS INJURY.