Buscar en el registro

THE INJURED EE WAS STANDING ON THE PIT PUMP SKID PRIMING THE PUMP. AS HE STEPPED BACK & OFF THE SKID, HE HELD ON WITH HIS LEFT HAND. AS HE LET GO OF THE FITTING HIS LITTLE FINGER ENCOUNTERED A SHARP EDGE ON THE PUMP DISCHARGE FITTING CAUSING A LACERATION TO HIS LITTLE FINGER. LACERATION REQUIRED 7 STITCHES TO CLOSE THE WOUND.

THE ARCH ON THE D L BUCKET HAD BROKEN; THE D L OPERATOR STOOD THE BUCKET ON ITS NOSE SO THE BREAK COULD BE REPAIRED. INJURED EMPLOYEE WAS STANDING ON THE INSIDE OF THE ARCH WHEN A LARGE CLOD OF DIRT (APPROX. 200#) FELL, STRIKING HIM ON THE HEAD, SHOULDER AND UPPER CHEST AREA. THEEMPLOYEE'S HARD HAT CAUSED THE LACERATIONS TO HIS HEAD/CHEEK/EYE, BRUISED UPPER CHEST AREA AND

GEAR HALF INSTALLATI0ON, LOWER HALF WAS IN PLACE, DURING THE INSTALLATION THE GEAR TURNED MASHING HIS FOOT IN THE MESH OF THE GEAR TEETH.

WHILE UNPINNING BOOM, BOOM SECTION JUMPED WHEN PIN REMOVED CATCHING HAND UNDER EQUILIZER. THUMB WAS SURGICALLY PINNED & SET. FIRST DIGIT OF RING FINGER WAS REMOVED BECAUSE SEVERED CIRCULATION.

EE GOT TOO CLOSE TO THE BEVELLED EDGE OF A WALL WHILE GRINDING THE FLOOR PLATE. WHEN THE GRINDER DISC STRUCK THE BEVELLED WALL IT KICKED BACK STRIKING HIM IN THE LEG.

EMPLOYEE WAS RUNNING A SCRAPER AND THE SCRAPER WAS BEING PUSHED BY 2 PUSH TRACTORS. THE LAST TRACTOR HIT THE ONE CLOSEST TO THE SCRAPER AND MADE IT RUN INTO SCRAPER WHICH JARRED THE OPERATOR.

GRINDING IN CLOSE QUARTERS, GOT TRASH IN EYES.

THE EMPLOYEE HAD BEEN WELDING, CHIPPING AND GRINDING ON THE DRAGLINE BUCKET ON THE SHIFT. AFTERHE WAS SHOME AFTERSHIFT HE NOTED INCREASED IRRITATION & DISCOMFORT IN HIS LEFT EYE. HE WEN TTO THE DR THE NEXT DAY WHERE A METAL PARTICLE WAS REMOVED FROM HIS LEFT EYE.

DUST PARTICLES BLOWING.

SCRAPER OPERATOR PULLED AWAY FROM DOZER WHILE BEING PUSHED. SCRAPER OPERATOR STOPPED CAUSING DOZER TO BUMP SCRAPER.

THE EMPLOYEE WAS ENGAGED IN PUMPING ACTIVITY ALL SHIFT. TOWARD THE END OF SHIFT HE NOTED SOME DISCOMFORT/IRRITATION IN ONE EYE. HE DID NOT FEEL OR KNOW WHEN PARTICLE GOT IN HIS EYE. HE CONTINU ED TO WORK THE SHIFT BUT PAIN/IRRITATION GOT WORSE OVERNITE AND HE WAS TAKEN TO ER THE NEXT DAY FOR REMOVAL OF PARTICLE.

EMPLOYEE WAS NOT SURE WHEN OR HOW PARTICLE GOT IN HIS EYE HE WAS WALKING THE DRAGLINE BACK ON ANOTHER SET & WENT OUT OF THECAB ONTO AN EXTERNAL WALKWAY & MAY HAVE BEEN STRUCK BY METAL SPALLING OFF OF THE WALKING CAM HE SAID THAT THE CAB AIRCONDITIONER WAS ON HIGH WHICH COULD HAVE BLOWN A PARTICLE INTO HIS EYE

EE WAS WELDING IN THE SHOP ON THE LOW BOY TRAILER FABRICATION. HE NOTED SOME IRRITATION IN HIS RIGHT EYE AND UPON LOOKING NOTED A PARTICLE CAUSING THE IRRITATION HE WAS WEARING A WELDING HOOD PLUG SAFETY GLASSES.

EE WAS TENDING A DIESEL DRIVEN 6 INCH WATER PUMP AND NOTED THAT IT WAS NOT PUMPING PROPERLY. HE DISCONNECTED THE DISCHARGE CLAMP AND THE DISHARGE HOSE FLEW OFF STRIKING THE EE IN THE MOUTH, DI SPLACING 4 TEETH. THE HEATED WATER IN THE PUMP BOWL AND DISCHARGE HOSE SPLASHED ONTO HIS RIGHT ARM CAUSING 2ND. DEGREE BURNS.

THE EMPLOYEE WAS IN A SHALLOW TRENCH PERPARING TO LAY A DISCHARGE PIPE FOR A ROCK DROP THE JD TRACKHOE WAS MOVING UPHILL TO A NEW POSITION WHEN THE TRACKS DISLODGED A DIRT CLOD WHICH ROLLED DO WNHILL STRIKING THE EMPLOYEEIN THE RT LEG EMPLOYEE SUFFERED TORNLIGAMENTS/TENDONS I NCALF OF RT LEG

EMPLOYEE WAS PREPARING TO WELD A CRACK ON THE UNDERSIDE OF THE DRAGLINE BOOM. HE HAD ARCED THE CRACK OUT & WAS GRINDING & POLISHING THE AREA WITH A 4" HAND HELD GRINDER. AS SHIFT CONTINUED, HE NOTED INCREASED PAIN IN RIGHT EYE. HE COMPLETED SHIFT & WENT TO DR. NEXT DAY. DR. REMOVED A METAL PARTICLE FROM EYE. EMPLOYEE WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS INVOLVED IN DRAGLINE REPAIR/BUCKET CHANGE. HE WAS WELDING A PIN INTO A DUMP SOCKET & HAD TILTED TO THE RIGHT AS HE WAS WELDING. A GLOB OF DIRT/SAND FELL FROM THE SUSPENDED BUCKET RIGGING DIRECTLY INTO HIS LEFT EAR. THE NEXT DAY HE WENT TO A PHYSICIAN & HAD THE FOREIGN BODY FLUSHED OR EXTRACTED FROM THE EAR.

IRRITATION IN EYE USING DRIVE AIR IMPACT TO TIGHTEN BOLTS

AIR GOUGER ENGAGED BLEW TRASH IN EYE

TWO EMPLOYEE'S WERE WORKING INT HE FEEDER/BREAKER AND WERE USING A CUTTING TORCH TO CUT OUT SOME METAL GUIDES. AN ACCUMULATION OF MATERIAL FELL INTO THE FEEDER WHICH CAUSED THE EMPLOYEE WITH THE TORCH TO JUMP AND TURN AWAY. AS HE DID SO, THE TORCH WAS DIRECTED TOWARD THE INJURED EMPLOYEE WHO JUMPED BACK AND UP, STRIKING HIS NECK AND UPPER BACK AGAINST THE STEEL OF THE BREAKER DIS

DURING A REPAIR DAY ON THE B-E 15 DRAGLINE, THE INJURED EMPLOYEE WAS USING AN ELECTRO-MAGNETIC PORTABLE DRILL PRESS WEIGHING 65# TO DRILL HOLES IN THE SIDE OF A POINT SHEAVE WHEEL. HE HAD TO L IFT THE DRILL INTO AN AWKWARD POSITION WHICH PLACED AN EXCESSIVE LOAD ON HIS BACK MUSCLES. MUSCLE STIFFNESS AND PAIN INCREASED DURING THE NEXT SEVERAL DAYS RESULTING IN PHYSICIAN VISIT.

EMPL WORKING DRAGLINE MAINTENANCE SHIFT WITH OTHER EMPL.THEY WERE REINSERTING PIVOT PIN IN VERTICAL FAIRLEAD ASSEMBLY.PIN FIT WAS TIGHT SO A CAT 231 TRAC-HOE BUCKET WAS USED TO APPLY DOWNWARD PRESSURE TO PIN.EMPLS HAD WALKED 15'AWAY FROM IMPACT POINT WHEN PIECE OF METAL SPALLED FROM PUSH BLOCK ON PIN AND STRUCK EMPL IN LOWER RIGHT JAW

THE EMPLOYEE WAS USING A 1" AIR IMPACT WRENCH TO RETORQUE THE SWING SEGMENT BOLTS ON THE 1570 BE DRAGLINE.THE EXHAUST AIR FROM THE IMPACT WRENCH APPARENTLY PROPELLED A METALLIC OBJECT INTO HIS RIGHT EYE.THE EMPLOYEE WAS WEARING COMPANY ISSUED SAFETY GLASSES WITH SIDE SHIELDS.HE WENT TO A PHYSICIAN ON 12-06 AND THE OBJECT WAS REMOVED.

THE EMPLOYEE WASA INVOLVED IN REPAIRS TO THE DRALINE BUCKET. WELDING OPERATIONS HAD COMMENCED WITH WELDING OF A TOOTH ADAPTOR ON THE BUCKET. AN ARC WAS INADVERTENTLY STRUCK WHILE THE EMPLOYEE WAS LOOKING AND THE EMPLOYEE RECEIVED AN ARC FLASH TO BOTH EYES. PAIN DID NOT START UNTIL LATER THAT EVENING AFTER THE EMPLOYEE WAS AT HOME.

EMPLOYEE WAS CLEARING TIMBER FROM AN AREA WHICH WAS TO BE A SETTLEMENT POND HE HAD JUST PUSHED ATREE DOWN & WAS BACKING UP WHEN A LIMB CAME THROUGH THE RT SIDE OF THE CAB ROLLOVER STRUCTURE ST RIKING HIM IN THE FOREHEAD THE EMPLOYEE HAD TO HAVE 27 STITCHES IN THE LACERATION

INJURED CONTRACTOR EMPLOYEE WAS USING A CHAIN SAW TO FELL A TREE APPROX 24" DIAMETER. AS THE TREE BEGAN TO FALL, A LIMB FELL OUT OF THE TOP AND STRUCK THE EMPLOYEE IN THE LEFT BACK AREA. DIAGN OSIS: 2 FRACTURED RIBS IN LOWER LEFT QUADRANT AND POSSIBLE BRUISED KIDNEY.

EMPLOYEE WAS USING 41/2IN.HAND HELD ELECTRIC GTRINDER TO V OUT A CRACK THAT HAD BEEN DETECTED IN BOTTOM CHORD OF BOOM ON B-E1570-W DRAGLINE BECAUSE HE WAS GRINDING OVERHEAD HIS HARD HAT WOU LD NOT STAY ON HIS HEAD HE PLACED HARD HAT UPSIDE DOWN ON FLOOR OF WORK BASKET & COMPLETED GRINDING PROCEDURE BEFORE BEGINNING TO WELD THE CRACK HE DID NOT NOTICE THE ACCUMULATION OF GRINDINGS

THE INJURED WAS CHANGING BREAKER BITS ON THE COAL BREAKER AT THE CONVEYOR. HE WAS USING AN ELECTRIC CHAIN HOIST TO ROTATE THE DRUM OF THE BRAKER. HE WAS HOLDING THE CHAIN HOOK ON A BRAKER BI T WITH HIS LEFT HAND AND DEPRESSED THE UP BUTTON ON THE ELECTRIC HAND CONTROLLER WITH HIS RIGHT HAND. THE SLACK IN THE CHAIN TOOK UP FASTER THEN HE EXPECTED PINCHING HIS LEFT THUMB, THUMBNAIL

AFTER USING SPR5Y GUN EMPLOYEE WAS IN THE PROCESS OF CLEANING DRIED CAKED ON PAINT FROM NOZZLE AREA HE WAS USING HIS RT.FINGER TO SWAB PAINT T HINNER AROUND THE NOZZLE & INADVERTENTLY PULLED THE TRIGGER THI8 CAUSED T HE THINNER TO SPRAY OUT OF THE NOZZLE & PENETRATE HIS FINGERTIP

THE EMPLOYEE WA8 USING AN AIR ARC TO GOUGE METAL FROM THE IMPELLER RETAINING NUT OF A SLURRY PUMP. THE IMPELLER AND NUT WERE IN THE PUMP HOUSING AND WHEN THE ARC WAS STRUCK, THE HOT SPARKS WE RE DIRECTED BAC5 TOWARD THE EMPLOYEE GETTING INTO HIS WELDING HELMET AND EYE.

EMPLOYEE WAS OP9RATING HAUL TRUCK IN NORMAL TRAFFIC PATTERN, COMING INTO PIT AND TRAVELING DOWN PIT ALONG HIGHWALL. THE DRAGLINE HAD JUST STARTED UP AND OPERATOR BELIEVING PIT WAS CLEAR, SPOI LED FIRST BUCKE7 INTO DESIGNATED AREA. AS HE DUMPED HIS FIRST BUCKET, APPROX 43 YARDS OF DIRT STRUCK CAB OF THE HAUL TRUCK. THE CAB WAS PARTIALLY CRUSHED, THE ROOF COMING DOWN STRICKING THE