Buscar en el registro

SUBJECT WAS RECLAIMING A SLOPE AND WENT TOO FAR OUT ON THE EDGE OF THE FILL. THE DOZER WAS ALLOWED TO GAIN TOO MUCH SPEED, DUE TO OPERATOR ERROR. OPERATOR DID NOT TRY TO SLOW THE DOZER BY LOWE RING THE BLADE. EXCESS SPEED CAUSED THE DOZER TO HIT SOME LARGER ROCKS. THE OPERATORS SEAT BELT OVER TIGHTENED AND JERKED HIS BODY WHICH SPRAINED HIS BACK.

SUBJECT WAS USING A GRINDING TOOL AND A PIECE OF METAL PARTICAL WENT IN HIS EYE. SUBJECT USED EYE WASH ON THE JOB SITE, WHICH WASHED THE PARTICAL OUT. A VISIT TO DR. O.D. CONFIRMED THAT THE PA RTICAL WAS SUCCESSFULLY WASHED OUT ON THE JOB SITE. NO TIME WAS LOST. SUBJECT WENT TO THE DR. AFTER WORK.

EMPLOYEE WAS USING A ROSE GUN TO INSTALL OIL INTO MACHINE POTS. WHILE APPLYING PRESSURE TO ROSE GUN HANDLE, HE FELT PAIN BEHIND RIGHT KNEE CAP.

EE WAS POSITIONING A BOX OF RESIN ON THE RIGHT FRONT TOOL TRAY OF ROOF BOLTER IN THE E15(026-0) SECTION WHEN THE MACHINE OPERATOR STARTED TO TRAM THE MACHINE INBY TO POSITION MACHINE FOR ROOF BOLTING. EMPLOYEE'S LEFT FOOT WAS RUN OVER BY THE FRONT TIRE.

EMPLOYEE WAS OPERATING THE LEFT DRILL STATION OF TWIN BOOM BOLTER, LOCATED TIGHT TO THE RIB IN THE E-15 (026-0) SECTION R1-2 FACE. WHILE RACHING AND TWISTING BODY TO RIGHT AND BACKWARD TO OPE RATE THE AST FEED CONTROLS WHILE ISNTALLING A ROOF BOLT, EMPLOYEE FELT A DULL PAIN IN HIS MIDDLE BACK AREA.

EMPLOYEE WAS HOLDING A HYDRAULIC HAND HELD COAL DRILL, WHICH WAS BEING REVERSED TO EXTRACT A STUCK DRILL STEEL, IN THE 3-11 (022-0) SECITON CUT-THRU TO E-9. WHILE DRILL WAS BEING REVERSED, TH E DRILL UNIT SPUN OUT OF THE EMPLOYEE'S HANDS, AND STRUCK HIS LEFT FOREARM.

EMOLYEE WAS OPERATING CONTINUOUS MINER BY REMOTEIN THE L2 ENTRY OF E22 SECTION. MINER WAS STOPPED BUT NOT SHUT OFF. WHILE CARRYING REMOTE RADIO, INJURED WAS POSITIONED BETWEEN THE MINER AND CO AL RIB ALONG SIDE THE END DRUM, WHEN HE BUMPED THE RADIO TRAM LEVER, CAUSING THE MINER TO PIVOTTOWARD THE RIB, AND PINCHING HIS LEG BETWEEN THE MINER AND THE RIB.

EE WAS DRILLING A ROOF BOLT HOLE AT THE INTERSECTION OF ME (O24-0) SECTIN R-3 ENTRY & #3 ROOM WHEN A SMALL PIECE OF ROCK FELL FROM AROUND THE BOLT HOLE & STRUCK HIS FRONT UPPER TOOTH, LOOSEN ING IT. MED RX ONLY ROOT CANAL

EE WAS INSTALLING 2 PIENCE ROOF BOLTS AT THEFACEOF R1 ENTRY IN THE 320 WORKING SECTION. WHILE HOLDING ONTO THE BOLT COUPLER WITHA GLOVED HAND, HE ACTIVATED THE HEAD RAISE LEVER INSTEAD OF THE TORATION LEVER CAUSING HIS LEFT INDEX FINGER & THE BLET COUPLER TO BE FORCED INTO THE ROOF BOLTHOLE. RETD TO RESTRICTED DUTY ON 4/16/99 Y

EE WAS COUPLING A TWO PIECE ROOF BOLT AT THE FACE OF X CUT B0L1 IN THE ME 024-0 SECTION. EE ACTIVATED THE HEAT FEED INSTEAD OF THE ROTATION, CAUSING HIS RIGHT HAND TO BE CAUGHT BETWEEN THE DRI LL HEAD AND THE BOLT COUPLER. RETURN RESTRICTED DUTY 2-11-99.

INJURED WAS PUTTING IN ROOF BOLTS WHEN A PIECE OF ROCK FELL FROM TOP STRIKING INJURE DON LOWER RIGHT LEG CAUSING A LACERATION AND BRUISE.

EE WAS INSTALLING ROOF BOLTS & ROOF MATS IN XCUT BELT TO R1 ENTRY OF ME(024-0) SECTION. WHILE INSTALLING RESIN CARTRIDGE INTO ROOF BOLT HOLE,THE ROOF MAT SPRUNG DOWN FROM THE ROOF, KNOCKING HI S SAFETY GLASSES AWAY FROM HIS FACE AND STRIKING THE BRIDGE OF HIS NOSE. *RETURNED REGULAR DUTY 11/24/98* *MEDICAL RX-3 STITCHES*

EE WAS OPERATING DRILL STATION OF TRUSS BOLTER MACHINE IN MAIN E (024-0) SECTION. HE ACTIVATED DRILL CHUCK LEVER TO OPERATE DRILL STEEL JAWS, INSTEAD OF LEVER TO LOWER DRILL HEAD AND HIS RT HA ND WAS CAUGHT BETWEEN THE DRILL CHUCK JAWS. EE RETURNED TO WORK 11-2-98 REGULAR DUTY. FIRST OFF 11-3-98.

EE WAS OPERATING TWIN BOOM ROOF BOLTER IN THE MAIN E (024-0) WORKING SECTION. EE WAS REBOLTING R1 ENTRY OF E13 BUTT WHEN A ROOF ROCK FELL FROM BETWEEN ROOF MATS, STRIKING THE CHEEK OF FACE AND LEFT F0REARM. EE RECEIVED 8 STITCHES, AND RETURNED REGULAR DUTY ON 10-2-98. MEDICAL RX ONLY. 8 STITCHES.

EE WAS OPERATING A MOBILE BRIDGE CARRIER WHICH WAS ATTACHED TO A CONTINOUS MINER IN THE E12 (022-0) WORKING SECTION. WHILE THE CONTINOUS MINER WAS CUTTING ROCK IN XCUT B-R1, THE MBC BOUNCED, C AUSING THE EE TO STRIKE HIS HEAD OFF OF THE PROTECTIVE CANOPY FRAME. RETURNED REGULAR DUTY. MEDICAL RX ONLY. CHIROPRACTIC.

EE WAS OPERATING THE R SIDE DRILL STATION OF A FLETCHER TWIN BOOM DDO ROOF BOLTER IN THE L-1 ENTRY FACE OF MAIN-E [O24-0] WORKING SECTION. WHILE LOWERING THE SAFETY JACK, A PIECE OF ROOF ROCK 22" X 27" X 2.5" FELL FROM ABOVE THE SAFETY POST & STRUCK THE EE'S LEFT FOREARM. *RETURNED TO WORK RESTRICTED DUTY 4/21/1998.

EMPLOYEE WAS LOWERING DRILL STEELS OUT OF A DRILLED HOLE AT THE L-3 OVERCAST AREA IN THE MAIN E WORKING SECTION (024-0), WHEN A PIECE OF ROCK DISLODGED FROM BETWEEN ROOFBOLTS AND FELL, STRIKIN G THE LEFT CHEEK OF HIS FACE. NO LOST TIME.

EMPLOYEE WAS CUTTING CONTINUOUS MINER BIT BLOCKS OFF OF THE CUTTERHEAD WITH AN OXY-ACETYLENE TORCH IN THE L-2 ENTRY OF THE ME(024-0) WORKING SECTION WHEN A PIECE OF HOT MATERIAL ENTERED HIS RT . EYE AROUND HIS PROTECTIVE SAFETY GLASSES.

EE WAS ROOFBOLTING IN XCUT B-R1 ENTRY OF THE E9 (022-0) SECTION, WHEN A PIECE OF ROOF ROCK FROM ALONG THE RIB LINE FELL ON HIS LEFT SHOULDER AND LEFT FOREARM. EE RETURNED TO REGULAR DUTY 11-3- 97 AND WORKED THRU 2-27-98. 1ST DAY RESTRICTED DUTY 2-28-98.

EE WAS OPERATING THE SIDE CONTROLS OF A TWIN BOOM ROOF BOLTER IN THE MAIN E[024-0] WORKING SECTION L4 ENTRY FACE. WHILE RAISING THE ATRS TO THE ROOF. EE'S LT. HAND WAS RESTING ON TOP OF THE RO OF BOLTER FRAME WHEN A PIECE OF ROOF ROCK [6"X4"X1"] FELL & STRUCK HIS LEFT THUMB.

EE WAS OPERATING THE RIGHT SIDE DRILL HEAD OF A TWIN BOOM ROOF BOLTER IN THE MAIN E 024-0 SECTION R-1 ENTRY FACE. WHILE LOWERING THE DRILL HEAD SAFETY POST, A PIECE OF ROOF ROCK FELL AND STRUC K THE EE S RIGHT FOREARM. NO LOST TIME. MEDICAL ONLY 15 STITCHES.

EE WAS PUSHING A ROOF BOLT INTO THE ROOF WITH THE DRILL HEAD OF A TWIN BOOM BOLTER WHILE OPERATING THE LEFT SIDE DRILL STATION AT THE E8 021 SECTION BELT ENTRY FACE, EE REACHED UP TO THE ROOF TO ALIGN A BEARING BPLATE TO CLEAR THE ROOF SKINHOLDER, WHEN HE PINCHED HIS FINGER BETWEEN THE PLATE AND THE MINER ROOF.

THE 270 OPERATOR DUMPED A CAR OF COAL WHEN A ROCK GOT LODGED IN THE FEEDER WHLE IT WAS RUNNING. HE TRIED TO GET IT LOOSE WHEN IT CAUGHT HIS RIGHT HAND AGAINST THE FRAME OF THE FEEDER & THE ROC K

EE WAS INSTALLING 6' RESIN BOLTS IN THE L3 ENTRY FACE OF THE 31 (021-0) SECTION. WHILE PUSHING A 6' BOLT UP INTO A ROOF BOLT HOLE, THE BOLT CAUGHT IN THE HOLE, CAUSING THE BOTTOM OF THE BOLT T O STRIKED HIS LEFT JAW AND LEFT LOWER LIP.

EE WAS INSTALLING CENTER ROOF BOLT FROM THE LEFT SIDE DRILL HEAD AT THE R1 ENTRY FACE OF THE E6 (022-0) WORKING SECITON. WHILE OPERATING DRILL HEAD, A PIECE OF ROOF ROCK FELL (ROCK WAS APPROX 5-1/2'X3-1/2'X6") FROM THE ROOF AND STURCK EE ON LOWER RT. LEG WHILE HE WAS ATTEMPTING TO AVOID THE ROCK.

EE WA USING A CUTTING TORCH TO BURN WEAR STRIPS OFF OF A CONTINUOUS MINER IN THE C12 (016-0) SECTION AT THE #2 RFM BELT TAIL. WHILE CUTTING WITH THE TORCH, A PIECE OF HOT SLAG ENTERED LEFT INN ER EAR CAUSING A BURN TO THE INNER EAR.

EE WAS OPERATING THE RT. SIDE OF A BOLTER DRILLING A BOLT HOLE AT THE 3-2(021-0) SECTION R-1 ENTRY FACE WHEN THE DRILL STEELS BECAME STUCK IN THE ROOF. WHILE USING HIS RT. HAND TO REALIGN THE DRILL STEELS INTO THE DRILL CHUCK,M AND SIMULTANEOUSLY RAISING THE DRILL HEAD TOWARD THE ROOF, EE'T RT. HAND WAS PINCHED BETWEEN THE DRILL HEAD AND THE MINE ROOF.

EMPLOYEE WAS INSTLLING 5' RESIN ROOF BOLTS AT THE R-1 ENTYR FACE OF THE E-2 (021-0) SECTION. HEIGHT OF THIS ENTRY IS LESS THAN 5 FOOT NECESSITATION BOLTS TO BE PRE-BENT. WHILE PUSHING ON ROO F BOLT OT STRAIGHTEN AND PUSH UP INTO THE ROOF BOLT HOLE, EMPLOYEE SSTRAINED HIS GROIN AREA.

EE WAS PERFORMING ELECTRIC WELDING ON A SCOOP TRACTOR IN THE R-2 ENTRY OF THE M-E (024-0) SECTION. WHILE WELDING, A FOREIGN OBJECT ENETERED RT EYE AND EE EXPERIENCED WLEDER'S FLASH. A DAMAGED SHIELD WAS DISCOVERED AFTERWARD. EE RECEIVED MEDICAL TREATMENT AND PRESCRIPTION MEDICATION.

EE WAS POSITIONED AT THE RT SIDE, NEAR DRILL CONTROLS, OF A TWIN BOOM ROOF BOLTER IN XCUT B-R1 FACE OF THE E-1[020-0] SECTION AFTER THE ATRS HADBEEN PRESURIZED AGAINST THE MINE ROOF. A PIECE O F ROOF ROCK [79" X 16" X 4"] FELL, STRIKING THE VICITMS RT. ARM & RT. HAND. THE ROCK FELL FROM BETWEEN THE ATRS & THE LAST ROW OF ROOF BOLTS.

VICTIM WAS REACHING FOR THE CONTINUOUS MINER CABLE TENDER ARM IN X CUT L1-L2 OF THE MAIN E 024-0 SECTION WHILE THE MINER OPERATOR WAS MOVING THE MINER. WHILE REACHING FOR THE CABLE TENDER ARM, VICTIM S RIGHT FOREARM WAS CAUGHT BETWEEN THE CABLE TENDER ARM AND THE COAL RIB.

EMPLOYEE WAS OPERATING LEFT SIDE DRILL BOOM OF ROOF BOLTER IN THE C-7(021-0)SECTION, WITH THE DRILL BOOM SWUNG TO THE CENTER AFTER INSTALLING THE CENTER BOLT . A PIECE OF ROOF ROCK FELL TO THE LEFT OF HIS POSITION (ROCK WAS 44" X 20" X 8STRIKING HIS BACK AND DRIVING HIS HEAD INTO THE DRILL BOOM TOOL TRAY, LACERATING HIS RIGHT SIDE.

EMPLOYEE WAS OPERATING A SCOOP TRACTOR IN TEH C-10 SECTION CONSTRUCTION AREA. SCOOP WAS POSITIONED UNDER CONTINUOUS MINER TAIL WHILE MIENR WAS CUTTING AND LOADING OUT BOTTOM ROCK. WHILE SCOO P WAS BEING LOADED, A PIECE OF ROCK FLEW OUT OF MINER TAIL STRIKING VICTIM ON GLASSES, NOSE AND FOREHEAD. EMPLOYEE RECEIVED 8 STITCHES. MED TREATMENT NO LOST TIME.

EE WAS OPERATING A ROOFBOLTER FROM THE OPERATOR'S COMPARTMENT. WHILE BACKING OUT OF SCUT WITH HIS RIGHT FOOT OUTSIDE THE OPERATOR'S COMPARTMENT, IT SLID DOWNHILL WHILE TRAMMING AGAINST THE COA L RIB, PINCHINE EE'S RIGHT ANKLE BETWEEN ROOFBOLTER FRAME AND COAL RIB.

WHILE DRILLING A ROOF BOLT HOLE IN XCUT R1 TO R2 FACE OF THE C-7(021-0) SECTION, A PIECE OF ROCK APPROX 36" X 32" X 0" TO 3" THICK FELL FROM THE MINE ROOF. WHILE ATTEMPTING TO GET OUT OF THE W AY, THE ROCK STRUCK THE VICTIM'S LOWER LEFT LEG. ROCK FELL FROM BETWEEN OUTSIDE ROOF BOLT HOLE AND COAL RIB. AREA WAS SUPPORTED WITH ATRS AND SAFETY MAST OF ROOF BOLTER.

EMPLOYEE WAS OPERATING THE RIGHT SIDE OF A TWIN BOOM BOLTER IN X CUT B-L1 ENTRY IN THE MC LT (015-0) SECTION. EMPLOYEE WAS PREPARING TO DRILLHIS 2ND HOLE FROM THE RT RIB WHEN A TRIANGULAR PIECE OF ROOF ROCK FELL, INBY THE ATRS, ON TO THE MINE BOTTOM AND ROLLED ONTO THE VICTIM'S RIGHT LOWER LEG.

HE BANGED HIS SHOULDER AND BACK INTO CANOPY BY RAISING UP TOO FAST.

WHILE INSTALLING ROOF BOLT HE CAUGHT HIS FINGER BETWEEN BOOM END OF ROOF BOLT

WHILE OPERATING THE DRILL AREA CONTROLS OF A TWIN BOOM ROOF BOLTER IN THE C-5 019-0 SECTION THE EE HAD HIS RIGHT FOOT UNDER THE DRILL BOOM AND HE LOWERED THE FOOT JACK ONTO HIS FOOT. THIS OCCU RRED AT THE L-1 ENTRY WORKING FACE, WHILE ROOF BOLTING.

EMPLOYEE WAS CUTTING THE TOP OF C8(018) SECTION#3 DRIVE SPILLBOARD WITH AN OXY-ACETY LENE TORCY EMPLOYEE WAS WEARING SAFETY GLASSES WHILE CUTTING SPILLBOARD THE OXYGEN FROM THE T ORCH BLEW RU ST PARTICLES INTO SUSPENSION & PARTICLES ENTEREDTHE EMPLOYEES LEFT EYE BEHIND HIS GLASSES

WHILE DRILLING A ROOF BOLT HOLE WITH AN ATRS EQUIPPED ROOF BOLTER IN THE MC RT (001) WORKING SECTION, A PIECE OF ROOF ROCK, 18" TO 20" LONG BY 8" TO 10" WIDE BY 3" TO 4" THICK, FELL AND STRUCK THE EMPLOYEES LEFT FOOT.

WHILE IN THE PROCESS OF ROOF BOLTING, E HAS THE BEND 48" BOLTS. DURING THIS OPERATION HE STRAINED HIS LOWER BACK.

EMPLOYEE WAS ROOFBOLTING AT THE L-1 ENTRY FACE OF MAIN C LEFT (007) WORKING SECTION WHEN A PIECE OF FACE ROCK SHEARED OFF ABOVE THE COAL SEAM (ROCK 80INLX34INWC6IN TO 10IN THICK) & ROLLED AGAI NST THE EMPLOYEES UPPER BACK CAUSING BRUISES & ALEFT EAR LACERATION AREA WAS BOLTED WITH 7FT COMBINATION BOLTS & ROOF SKINS ON 4FTX4FT CENTERS

WHILE OPERATING A HAND GRINDER IN SURFACE SHOP TO GRIND A PIECE OF METAL FRAME,GRINDING WHEEL GOT CAUGHT ON A PIECE OF METAL CAUSING GRINDER TO KICK BACK AND JERK EMPL RIGHT SHOULDER. EMPL FIR ST DAY OFF 8-28-92.

WHILE ROOF BOLTING AT THE L-3 FACE OF THE C-1 -15 WORKING SECTION EE WAS STARTING THE DRILL STEEL INTO THE ROOF WHEN A PIECE OF ROCK MEASURING 20 W X 24 X L X7-14 THICK DISLODGED FROM THE ROOF AND STRUCK THE EE S LEFT HAND LEFT SHOULDER AND RIGHT LEG T BAR ATRS WAS PRESSURIZED AGAINST THE ROOF.

EMPLOYEE WAS USING A GREASE GUN TO PRESSURIZE A GREASE TAKE-UP TO REMOVE A CAT DRIVE FROM A MOBILE BRIDGE CARRIER IN THE C-1 (015) WORKING SECTION. WHILE PUMPING THE GREASE GUN, THE GREASE GUN HOSE RUPTURED, CAUSING PRESSURIZED GREASE TO ENTER HIS LEFT EYE.

WHILE DRILLING A ROOF BOLT HOLE AT THE L-1 FACE WITH A TWIN BOOM BOLTER IN THE D-5 (018) WORKING SECTION EMPLOYEES LEFT HAND WHICH WAS HOLDING ONTO A ROOF MAT WAS STRUCK BY A PIECE OF ROCK 75I N LONG X16IN WIDE X2TO 4 IN THICH WHICH FELL FROTHE ROOF BEHIND THE ATRS T-BAR

EMPLOYEE WAS REPAIRING A BROKEN LEFT SIDE DRILL HEAD BOOM SWING JACK FITTING ON A TWIN BOOM ROOF BOLTER IN THE C1 (015) SECTION LEFT ROOMS IN X-CUT BELT TO R1 AT BELT STATION 8208. WHILE ACCES SING THE BROKEN SWING JACK FITTING, THE DRILL HEAD BOOM ACCIDENTALLY SWUNG TOWARD THE COAL RIB, PINCHING THE EMPLOYEE BETWEEN THE BOOM AND THE RIB. FRACTURED RIGHT PELVIS, PUNCTURED LEFT ARM.

EMPLOYEE WAS OBSERVING ROOF BOLTERS RE-BOLTING A ROOF FALL CAVITY IN THE R1 ENTRY OF ROOMS TO THE LEFT IN THE C-1 (015) WORKING SECTION.WHILE STANDING WITH HIS BACK TO THE RIB A PIECE OF RIB R OCK APPROX 47" LONG 6" TO 10" WIDE AND 3 1/2" TO 8" THICK FELL FROM NEAR THE ROOF LINE AND STRUCK THE EMPLOYEE ON THE BACK AND RIGHT ARM.

AFTER DRILLING A ROOF BOLT HOLE IN THE L-1 ENTRY FACE IN THE MAIN C (014-0) WORKING SECTION, THE EMPLOYEE WAS REMOVING DRILL STEELS FROM THE HOLE, WHEN A DRILL STEEL FELL OUT OF THE HOLE AND S TRUCK HIS LEFT INDEX FINGER.