Buscar en el registro

smashing of left foot

EE was roof bolting a corner. As EE was retracting EE's side it caught the roof. Upon catching the roof it caused the slide out on the canopy to gap open EE caught EE's fingers in the gap.

EE was bolting EE was drilling the second hole in the last row of bolts at the face. When EE was struck by a rock from the roof.

EE was roof bolting over loose roof material that had fallen. EE was lowering the boom on the bolter when EE's left knee slid under the boom striking EE's left knee.

EE was bolting on opposite side. The bolter operator went to move the bolter forward. EE did not notice EE's left foot was in the way the bolter tire ran upon EE's left foot.

While bolting, the EE's cuff of long sleeve shirt was caught by a burr on the drill chuck. The rotating drill chuck pulled the EE's arm into the drill chuck, fracturing the E's left arm.

OPERATOR WAS MOVING DOZER. WENT OVER COAL PILE. OPERATOR WAS THROWN OUT OF SEAT & HIT HEAD ON DASHBOARD.

DOZER OPERATOR WAS PUSHING A TRUCK LOAD OF ROCK IN FIRST GEAR WHEN GEAR LEVEL, WHICH DID NOT STAY IN POSITION AS DESIGNED, JUMPED INTO SECOND GEAR PROPELLING OPERATOR INTO LARGE ROCKS AND SNAP PING HIS HEAD BACKWARD.

OPERATOR WAS PULLING BRUSH TO BUILD ROAD TREE CAUGHT BEHING ANOTHER TREE AND JUMPED OVER STRICKING LABORER ON LOWER PART OF RIGHT LEG SUBJECT WAS TAKEN TO HOSPITAL WHERE LEG WAS DETERMINED TO BE BROKEN.

WHILE USING A 3/4 AIR WRENCH ON A BOLT TO REMOVE A COLLETT FROM 988-7 LOADER BUCKET WHEN THE COLLETT SPUN AND HIS FINGER ON HIS RIGHT HAND WAS CAUGHT BETWEEN THE BOLTS AND CUT HIS FINGER.

EE WAS CUTTING REES AND BRUSH WITH A CHAIN SAW. HIS FOOT SLIPPED INTO THE CUTTER CHAIN CUTTING THE INSIDE OF HISS LEFT FOOT.

EMPLOYEE WAS OPERATING DOZER DESTROYING SHED TO BUILD POND 2X6 SPRANG LOOSE AND JUMPED ABOUT 30 TO 35 FEET STRIKCING VICTIM ON BACK GOING UP TO NECK AND HEAD.

OPERATOR WAS PUSHING SPOIL FROM FACE. ENCOUNTERED LARGE ROCK. WAS PUSHING ROCK TO BOTTOM OF SPOIL & DOZER BLAD SLID OVER OVER & DROPPED FRONT OF DOZER, ELEVATING REAR, AS OPERATOR SHIFTED TO R EVERSE, THROWING OPERATOR FROM SEAT. RIGHT ELBOW HIT DOOR LATCH CAUSING DOOR TO OPEN. AS EE PASSED THROUGH DOR, RT. HIPT HIT THROTTLE KILLENG ENGINE. EE LANDED ON PUSH BEAM ON BACK HIP.

EMPLOYEE WAS HEATING AIR STARTED ON ENDLOADER WITH CUTTING TORCH. BRIGHT LIGHT AND GLARE FROM THE SNOW ARC BURNED EYES.

OPER. WAS USING DOZER TO PUSH SPOIL TO LOADER IN THE WHITESBURG PIT HE MISJUDGEDTHE DISTANCE GOING OVER THE EDGE OF THE SPOIL DOZER FELL APP 25FT OVERTURNING COMING TO REST IN WHITESBURG PIT

WHILE OPERATING DOZER AND RIPPING ROCK, THE OPERATOR MADE A PASS FORWARD AND WHEN COMING BACK IN REVERSE HE HIT A ROCK WHICH THREW HIM FORWARD AND CAUSED HIM TO HIT BACK.

CUTTING BRUSH WITH CHAIN SAW, CUT LEFT KNEE.

CUTTING TREE STARTED FALLING IN THE WRONG DIRECTION. STARTED TO MOVE AND FELL CUTTING LEFT KNEE . GOT THREE STITCHES AND A SHOT FOR INFECTION.

68935 BACKING OFF SPOIL, A ROCK FELL OUT OF WINDROW UNDER THE LEFT TRACK OF DOZER. THIS CAUSED THE SEAT TO BOTTOM OUT AND EMPLOYEE'S ELBOW HIT THE ARM REST AND CAUSED EMPLOYEE TO JAM SHOULDER 15405ECK.

85061S CUTTING TREES WHEN THE CHAIN SAW SLIPPED AND CUT HIS RIGHT KNEE.HE RECEIVED STITCHES.

WHILE SHUTING OFF THE PUMP IN R EACHING FOR KEY HIS SHIRT SLEEVE GOT CAUGHT IN ALTERNATOR & RIPPED SLEEVE OFF & CUT UPPER BACK SIDE OF LEFT WRIST

WHILE WELDING ON DUMP HOPPER AT PREPARATION PH. HOT METAL FROM A HAMMER JACK SPRAYED INTO HIS EYE.

EE WAS REMOVING A BOLT WIRE AN IMPACT WRENCH WHEN A PIECE OF METAL FLEW UNDER SAFETY GLASSES AND WENT INTO RIGHT EYE. HE WAS WEARING SAFETY GLASSES.

WHILE WASHING EQUIPMENT, HE SLIPPED AND FELL. WAND FLEW OUT OF HAND AND HIGH POWER WATER CUT HIS KNEE.

WHILE CLEANING SANDBLASTER, HAND WAS HIT BY SANDBLASTER.

WHILE TIGHTENING SUBFRAME BOLTS WITH AIR WRENCH AND WELDING TRUCK FRAME, A PIECE OF RUST STUCK TO RIGH6 EYE. GOGGLE WERE WORN.

GRINDING ON MANIFOLD OF DOZER,DUST GOT ON EYELID AND WHEN HE WIPED IT,METAL GOT ON HIS EYE.WAS WEARING SAFETY GLASSES.

WELDING ON DOZER METAL OR TRASH GOT IN EYE.

OPERATOR WAS SHOVELING DIRT OFF OF HIGHWALL. AS HE S TARTED TO BACK UP FOREMAN MOTIONED FOR HIS TO PARK DOZER AT SHOP. OPERATOR PUT TRACTOR INTO NEUTRAL AS FOREMAN WAS TALKING TO HIM. WHE N OPERATOR STATEDTO GO BACK TO WORK HE RELASED BRAKE, LET UP ON DECELERATOR NOT REALIZING HE WAIN NEUTRAL & ROLLED OVER RIDGE OF DIRT & HIGHWALL. NO DAMAGE TO DOZER.

THE EMP. WAS ON ONE SIDE OF THE PLANT REPAIRING A LEAKING WATER LINE. ON THE OTHER SIDE OF THE PLANT A WELDER WAS FABRICATING AND WELDING NEW LINES. THE CONT. GLARE FROM THE WELDERS ELECT RODE CAUSED MECHANI CS EYES TO BECOME FLASH BURNT.

EMPLOYEE HIT EL6OW ON DOZER TRACTOR CAB. WHEN DOZER TRACK DROPPED ON ROCK.

WHILE CUTTING A3 ANGLE INSIDE THE BED OF ROCK TRUCK R-85-10,THE ANGLE SPRUNG AND KNOCKED HIM INTO THE BED.THIS ACCIDENT WAS NOT REPORTED UNTIL MARCH 3.HE THEN TOOK MARCH 4 OFF.

I NAME CAME IN 9ARLY TO START EQUIPMENT. IT WAS DARK, AND I STEPPED INTO 3 FOOT HOLE. THEN ON FEB. 25 ,I WAS CUTTING AN ANGLE INSIDE BED OF R-85-10,THE ANGLE SPRUNG AND KNOCKED ME INTO BED.

WHILE CUTTING A3PIECE OF PLYWOOD A PIECE FLEW AROUND SAFETY GLASSES AND INTO LEFT EYE

WHILE WORKING O3 KOMATZU DOZER #6, A PIECE OF DIRT GOT IN EYE. HE WAS WELDING AND WEARING EYE PROTECTION.

WHILE CUTTING BOTTOM ROLLER U-BOLTS ON DRAGLINE A HOT PIECE OF METAL ENTERED RT EAR AND BURNED A HOLE IN EAR DRUM OF RT EAR

WHILE WORKING ON PIPE AT FUEL STATION IT FELL AND HIT LEFT SIDE OF BODY.