Buscar en el registro

Welding on a Joy 14-9CM when a piece of hot material went into boot causing a burn on the inside of the left calf area causing a burn. Was not reported until 8/18/13.

Miner operator sitting inby red zone on #4 CM when miner swung toward him pinching him between machine & rib.

Bolting with twist steel and it hung up trying to pull steel out of top some how canopy hit him on the back of his head, was nothing wrong with the jacks.

EE was bolting repeat enter was resin roof bolts and his shoulder started hurting.

Miner had backed out of pillar line. MRS jack was being moved when a bolt head broke off letting a rock 67 x 72 x 6 fall and strike MRS operator in the lower back.

The injured employee was operating a remote continuous miner. A piece of line curtain was burried in gob that had been scooped into a fresh cut. When the gob with the curtain came across the end of the conveyor into s.c. it slung coal & mud into miner operators face, filling his eyes with coal.

The witness stated he was bolting not knowing that the cable reel was engaged. His co-worker was at the rear of the bolter at this time and was flipped by the cable when the reel began taking up. The co-worker complained of low back pain.

Letting head down, he had his hand on drill pot. Got fingers between drill pot and drill pot arms.

Bolting top in face when he lowered head on bolter a piece of drill steel fell out of hole and hit him on lower left arm, causing a bruise and contusion.

Miner operator was loading end of 8 rt on main section 1 break in by spad 3748. Miner operator was loading gob and became pinned against rib approx 3' inby standoff. Injury to pelvic area and legs.

Bolter operator bolting up cap coal. When drill steel when through cap coal the coal dislodged fro the mine roof striking the operator on his head & shoulders.

A piece of slate mine roof fell out between he last row of bolts and the ATRS on the operator. The operator complained of pain in his neck, right shoulder and chest.

EE WAS BOLTING TOP - PUTTING UP RIB BOLT AND RIB ROLLED STRIKING HIM ON HIS BACK IN THE CENTER OF HIS BACK IN #8 ENTRY. WHEN HE TURNED AROUND TO SEE WHAT HAPPENED HIS LEFT JAW STRUCK CANOPY POST. HE'S GOING TO SEE A SPECIALIST ABOUT JAW.

WAS SETTING UP MINER TO LOAD, DROPPED PAN & HEAD ON BOTTOM TO PUSH UP LOOSE COAL. I WAS LOOKING STRAIGHT AHEAD & DID NOT REALIZE MY FOOT WAS IN THE PAN OF HEAD A BIT CAUGHT MY BOOT & ROLLED ON MY FOOT BREAKING TWO TOES AND HAVING TO GET STITCHES.

A PIECE OF DRAW ROCK FELL BETWEEN ATRS AND LAST BOLT.

STANDING BESIDE ROOF BOLTER AND A RIB ROLLED HITHIM ON LEFT SIDE OF BACK AND DOWN HIS LEGS. IN #3 ENTRY.

THE MAN WAS PREPARING TO DRILL BOLT HOLE IN LAST ROW OF BOLTS. WHEN HE PUSHED THE DRILL STEEL AGAINST THE ROOF A PIECE OF ROCK 2"THICK 18" X 18" BROKE LOOSE AND FELL STRIKING HIS LEFT HAND WHI CH CUT HIS MIDDLE, RING AND PINKY FINGER.

SIDE ROOF BOLTER OPERATOR WAS DRILLING ROOF WHEN A PIECE OF ROOF FELL STRIKING HIM.

EE WAS DRILLING TOP WHEN A PIECE OF LOOSE ROCK FELL, STRIKING HIM ON HIS LEFT HAND.

HE CAUGHT GLOVE ON LEFT HAND AT DRILL CHUCK TWISTING LITTLE FINGER.

GLOVE CAUGHT ON ROTATING DRILL STEEL.

ROOF BOLTER MASHED FINGER ON DRILL STEEL.

EE WAS OPERATING THE CONTINUOUS MINER WHEN HE TURNED TO LOOK AT THE INCOMING S/C & CABLE WHE HE FELT PAIN IN HIS KNEE AND IT CONTINUED TO SWELL.

EE HAD WENT INTO FACE OF #4 ENTRY WITH BOLTER OPERATOR & BOLTER AND WAS REMOVING REFLECTOR FROM 2ND ROW OF BOLTS, WHEN A PIECE OF DRAW ROCK FELL, STRIKING EE ON THE HEAD AND DRIVING HIM DOWN T O THE BOTTOM, BREAKING HIS LOWER LEG AND POSSIBLY HIS THIGH. (RT. LEG)

THE EE PLACED A WOODEN BLOCK UNDER THE TIRE OF A ROOF BOLTER MACHINE TO AID TRACTION FOR THE TIRE. THE TIRE BEGAN TO SPIN AND THE BLOCK WAS EXPELLED AND STRUCK THE EE IN THE KNEECAP RESULTING IN A BRUISE.

BOLTING TOP, BOLTS BROKE OUT OF VALVE CHEST AND TRAY LETTING IT FALL ON RIGHT KNEE.

THE EE WAS INSTALING A ROOF BOLT AND HAD HIS RIGHT HAND ON THE FRAME OF THE BOLTER. A PIECE OF ROCK FELL AND STRUCK HIS HAND RESULTING IN A BRUISE

BOLTING TOP BOLT WRENCH CAME OUT OF DRILL HEAD HITTING EE ON LEFT HAND.

BOLTING TOP AT OVERCAST, A PIECE OF ROCK FELL FROM TOP HITTING LEFT HAND.

BOLTING TOPON MEDINA MAINS IN #ENTRY ROCK FELL FROM TOP HITTING LEFT HAND. ROCK SIZE WAS APPORX2" THICK AND FROM 0" TO 12" WIDE

ROCKDUSTING FACE AREA, ROOF & RIBS, DUST FELL FROM ROOF INTO LEFT EYE. THE ACCIDENT NOT REPORTEDUNTIL 3/21/97

PUTTING ROOF BOLT IN DRILLED HOLE, MASHED FINGER (LITTLE) ON RIGHT HAND BETWEEN BOLT PLATE AND DRILL HEAD ON BOLTER.

PUT MINER HEAD ON FOOT. CHANGING BITS ON CONTINUOUS MINER AND HAD REMOT BOX ON TOP OF MINER, LET HEAD DOWN ON REMOTE BOX ON RIGHT FOOT.

EMP OPERATING BOLTER. REPOSITIONING BOLTER. EMP HAD RIGHT FOOT EXTENDED OUT. EMP WAS GOING TO PUT FOOT JACK ON THE BOTTOM, INSTEAD USED THE DRILL BOOM EXTEND LEVER AND CAUSED THE FOOT JACK TO BE PLACED ON BIG TOE OF RIGHT FOOT.

BOLTING RIBS. ROCK WAS FALLING. JUMPED OUT OF WAY AND INJURED ANKLE WHEN JUMPED.

SO HE WAS BOLTING TOP WHEN RIB ROW OFF & HIT HIM LT SHOULDER & RT FOOT

EMPLOYEE WAS INSTALLING GLUE & BOLT IN HOLE WHILE STANDING ON DRILL HEAD GOT LEFT FOOT HUNG BETWEEN DRILL HEAD AND CANOPY MAY HAVE A COUPLE TOES BROKEN.