Buscar en el registro

The miner was using a welding torch when the oxygen hose burst and ignited. The fire burned through the miners' jacket and shirt resulting in a burn to EE's stomach.

The employee dropped something while using a torch. EE bent over to pick up the item and the flame from the torch burnt EE's arm. EE states should have turned the torch off before retrieving item. Employee has a 2nd degree burn on right arm. No lost time from work.

Employee was welding within the primary crusher when a piece of hot material fell into the top of a boot and burned their ankle and foot. Employee went to the emergency room and was transported to a burn unit. Diagnosed the injury as third degree burns on their right foot. Employee has not returned to work.

Employee was cutting a ACSR cable with a band saw. EE was holding the cable in EE's left hand, saw in the right. After the cut was made, the blade stopped and came to a rest on top of EE's left hand, causing a cut requiring four stitches. The employee finished EE's shift after the cut, got the stitches and returned for work at the normal starting time the next day.

Employee was cutting a bolt with a torch. A piece of hot steel landed on his right pinky finger. Employee waited to report and get medical attention, the finger swelled, blistered then became infected.

Loose stone was not removed and/or secured prior to entering the crusher. Employee was stuck and trapped by 2 rocks that fell from an elevated position. Employee felt that the rocks were not going to move prior to the accident.

While grinding, the grinder jumped and hit the employees hand causing a laceration that need stitches.

Employee was lifting a pip-men out of the primary crusher when the worn/greased shaft slide out of its position, falling onto the crane's operator station.

EE WAS CONDUCTING MAINTENANCE ON A CRUSHER. WHEN THE GROUP WAS REPOSITIONING THE CRUSHER LID, THE LIFTING CABLE SHIFTED, CAUSING THE LID TO SHIFT. EE'S HAND WAS CAUGHT BETWEEN THE LID AND A PIECE OF METAL.

Ee was using a cutting torch when the torch back-fired due to grease splotter.

EE WAS WORKING ON A WISCONSIN ENGINE SHROUD. WHILE TIGHTING A 5/16 BOLT WITH A 3/8 DIVE RATCHET. THE RATCHET SLIPPED ON AND HE STRUCK THE EDGE OF THE METAL SHROUD.

EE WAS GRINDING ON STEEL BEAMS WITH SAFETY GLASS ON, WHEN A CHIP OF STEEL CAME FROM BEHIND. NOTE=EE WAS WEARING SAFETY GLASSES.

WHILE WELDING ON BREAKER BARS OF IMPACT CRUSHER TOP OF WORK BOOTS WERE NOT COVERED. HOT METAL SLAG FROM THE WELDING WENT DOWN INSIDE OF LEFT WORK BOOT CAUSING 2ND DEGREE BURN LEFT MEDIAL SHIN.

EE WAS HELPING THE MECHANIC TO TAKE BRAKE DRUMS FROM A LOADER. THE MECHANIC WAS USING AN AIR POWERED IMPACT GUN TO REMOVE THE NUTS FROM THE BOLTS. AS HE ENGAGED THE GUN, A PIECE OF METAL FLE W FROM THE NUT INTO EE'S EYE.

EE WAS TRYING TO HOOK A LARGE ROCK INTO THE CRUSHER. AS HE WAS PLACING THE HOOK, A SMALL ROCK FELL INTO THE CRUSHER AND FLEW OUT OF THE MOUTH OF THE CRUSHER AND STRUCK HIM ON THE RIGHT SIDE OF THE CHIN.

CLEANING OUT FEEDER, WAS JAMMED UP, ROCK FELL DOWN FROM INSIDE & LANDED ON LEFT FOOT.

THE EMPLOYEE AND MECHANIC WERE REPAIRING THE BULLDOZER TRACKS. AS THE EMPLOYEE REACHED TO PICK UP A HAMMER, THE MECHANIC TURNED HOLDING A LIT TORCH. THE FLAME BURNED AND BLISTERED ALL THE SKIN ON THE BACK OF THE EMPLOYEE'S HAND.

EE WAS DRILLING 1/4 DIA HOLE IN STEEL BEAM WITH SAFETY GLASS ON, WHEN STEEL CHIP FELL IN HIS EYE. NOTE: EE WAS WORKING OVERHEAD.

WHILE ATTEMPTING TO LOOSEN ADJUSTING BOLTS THE IMPACT ADAPTER BROKE AND FRAGMENTS STRUCK HIS FOREARM.

COULDN'T HEAR IF MOTOR WAS RUNNING PUT HAND ON MOTOR TO SEE IF RUNNING, CAUGHT FINGER

WHILE WELDING WITH HELMET DOWN PIECT OF STEEL FELL OFF OF SIDE FRAME & STRUCK FOOT.

GRINDING PADS FOR 8813 WITH HAUL GRINDER.

WHEN USING A WIRE WHEEL EMPLOYEE WAS STRUCK IN LEFT EYE WITH SLAG. EMPLOYEE HAD WELDING HELMET IN PLACE AND USED EYE WASH TO TRY TO CORRECT THE SITUATION.

EMPLOYEE WAS WELDING DREDGE CHAIN LINKS. LINK FELL OFF WELDING TABLE AND STRUCK RIGHT FOOT FRACTURING BIG TOE.

WAS HELPING THE WELDER AND GOT WELDERS FLASH IN EYES.

EMPLOYEE WAS HELPING WELDER, AIR HOSE FELL OFF OF SCREEN DECK HITTING EMPLOYEE ON LEFT SIDE OF FACE BELOW LEFT EYE. EMPLOYEE SUFFERED ABRASION TO LEFT CHEEK AND HAS BLACK EYE.

NIGHT WELDER HAD SLAG POP OFF WELD AREA ENTERINGHIS RIGHT EYE.

AIR ARCING WHILE AIR ARCING IN BACK OF TRUCK TR 24 IN CLOSED AREA. PIECE OF METAL CAME UP UNDER WELDING HELMENT. INTO RIGHT EYE HAD HELMENT ON OVAL UNIBOY DOWN AND CAME FROM UNDER HELMENT BY C LAIN.

WHILE USING A PORTABLE GRINDER ON A METAL TANK APIECE OF METAL GOT BEHIND WELDING HELMET AND STRUCK RIGHT EYE. BLURRED VISION AND FOEIGN OBJECT EMBEDDED IN EYE.

PITE IS OUR NITE WELDER. HOT SLAG RAN DOWN INSIDE WORK BOOT.

ATTEMPTING TO START HOBART WELDING MACHINE EE WAS HOLDING WITH LEFT HAND TO STEADY MACHINE WHILE CRANKING WITH RIGHT HAND.

WHILE WELDING LIFTED UP SHIELD AFTER DEPOSITING WELD SLAG ON FRESH WELD POPPED STRIKING EYE (CORNEAL ABRASION).

WELDING CRACK ON TELSMITH 66IN CRUSHER

EE WENT TO STOP TAIL PULLEY FROM SLIPING INTO SHUT OFF 1260 CRUSHER.

WHILE ATTEMPTING TO REPAIR AIR-OPERATED GREASE GUN, THE PISTON ACTIVATED, STRIKING THE RIGHT HAND, INJURING THUMB AND FORE-FINGER.

EE ASSISTING WELDER WHILE DOING REPAIR WORK ON PIPE. INJURED PARTY RECEIVED A WELDING FLASH WHILE PERFORMING THESE DUTIES.

PER REQUEST;CLEANING ROCK OUT OF CRUSHER WHEN STONE FELL ON LEFT HAND AND JAMMED THUMB.

ROCK FLEW OFF SHAKER & HIT HIM ON HEAD HELMET.

SOMEONE GRINDING AND PIECE METAL FLEW IN EYE.

TURNING OVER CRANE START MOTOR AND IT KICKED BACK.

AIR WRENCH BLEW DIRT IN FACE, PIECE OF DIRT WENT IN RIGHT EYE.

EMPLOYEE WAS CUTTING A METAL PLATE OUT OF A FEEDER BOX WITH A CUTTING TORCH. HE WAS RESTING HIS BODY ON THE PLATE. WHEN THE PLATE FELL, THEREFORE THE HOT PLATE STRUCK HIM ON THE SHOULDER, LE FT KNEE, AND LOWER RIGHT LEG. THE EMPLOYEE WAS NOT FOLLOWING NORMAL PROCEDURES REQUIRED FOR THE PROJECT.

EMPLOYEE WAS REMOVING A WATER PUMP FROM A SUMP HOLE. THE PUMP WAS CONNCETED TO THE CRANE AND AS THE PUMP WAS BEING RAISED A LOOSRE PIECE OF GRATING FELL OFF OF PUMP PLATFORM. THE GRANTING ST RUCK EMPLOYEE ON HIS LEFT HAND.

WHILE DRILLING A PIECE OF MEDAL FLEW BACK INTO CAP AND METAL PIECE LODGING IN LEFT EYE.

CHANGING BIT-BIT COLLAR FELL DOWN AND THE STEEL SMASHED HIS THUMB.

EMPL WAS WELDING AIR ARK

WELDING IN CRUSHER.

WELDING