Buscar en el registro

Employee was welding and grinding and got a foreign body in right eye.

Possibly exposed to arc welding from fellow worker; working on the opposite side of blower housing. Employee was wearing welding/cutting goggles.

Employee was welding at the palletizer and got a piece of metal in eye.

Employee was fabricating a roll for the soda ash belt conveyor. While machining surface of roll on lathe a flying metal chip embedded in his left eye.

Employee was welding inside of pipe, and when moving forward to continue welding, he came in contact with a previous weld and burned his left elbow.

EE was changing springs on the #44 trailer. He was cutting spring bolts and a piece of metal got in left eye.

Went to unplug #3 screw w/air hose, was holding himself up w/left hand, operating air hose w/right. Slipped & saw his hand slip into screw, at the same time I pulled the trip cord but not quick enough. When he pulled his hand out I realized my fingertip was missing. The screw was guarded & had trip wire, small opening for maintenance only, to view for proper operation.

EE WAS BLOWING OFF THE FORK LIFT AND SLIPPED, ACCIDENTALLY HITTING TRIGGER ON AIR HOSE. THE AIR HIT HIS LEFT EAR, CAUSING SOME PAIN AND DISCOMFORT. THE ROOF HAS A LEAK AND THERE WAS ICE IN THA T CORNER.

A PIECE OF GRINDING FLEW INTO RIGHT EYE WHILE HE WAS WEARING EYE PROTECTION.

EMPLOYEE WAS CLEANING A PLUGGED CHUTE IN THE K SCREEN SPLITTER. THE EMPLOYEE REACHED INSIDE SPLITTER TO REMOVE ORE FROM PIPE. THE SPLITTER CAUGHT HIS COVERALL PULLING HIS HAND INSIDE AND CRUS HING HIS LEFT HAND.

EMPLOYEE WAS INSTALLING A SET OF ROLLERS, INVOLTVING GRINDING & WELDING STEEL, WHEN A PIECE OF STEEL FLEW INTO EYE.

EMPLOYEE WAS WELDING ON A TRACTOR IN THE SHOP WITHOUT GOOD VENTILATION AND THE SMOKE HURT HIS LUNGS.

EE WAS WELDING & CUTTING ON KILN, & GOT PIECE OF FOREIGN MATERIAL IN LEFT EYE

EE WAS OPERATING CRANE, TURNED ON FAN & SOMETHING BLEW INTO (R) EYE.

EMPLOYEE WAS BAGGING 53 ORE FROM RAYMOND MILL WHEN PERLITE PARTICLE ENTERED RIGHT EYE. DID NOT SEEK MEDICAL ATTENTION UNTIL EVENING OF 4/25/00 AT E.R.

STAPLER DISCHARGED WHILE REFILLING WITH STAPLES.

PULLING HOSE OFF A TRAP WASTE PUMP AND HOT WATER & STEAM HIT HIM ON RIGHT HAND & ARM.

DIRT FLEW IN LEFT EYE WHILE WORKING IN THE MILL.

EE WAS WELDING PATCHES ON AIR DUCT, HE STATES THAT HE DID NOT SEE SHARP OBJECT IN DUCT. THIS SHARP OBJECT CAUSED A PUNCTURE WOUND TO HIS LEFT HAND. EE SOUGHT MEDICAL CARE ON 9-29-95, 9-30, 10- 1 SCHEDULED DAYS OFF.

EMPLOYEE STUCK HIS HAND IN A MOVING SEAL VALVE WHILE CHANGING PRODUCTS AT CLASSIFIER

CLEARING SLASH WITH A CHAIN SAW. CUTTING LIMBS OFF OF A TREE. WITH THE CHAIN SAW MOVING, HE RAISED HIS LEG INTO THE SAW.

EE HAD JUST COMPLETED WELDING, HE HAD RAISED HIS WELDING HOOD WHEN A PARTICLE FELL IN HIS EYE. RUST RING--PRESCRIPTION USED IN OFFICE--NO RX GIVEN.

EMPLOYEE WAS REMOVING PLASTIC FROM ROLLERS ON STRETCH WRAP MACHINE HE BUMPED BAR & MACHINE STARTED MACHINE PULLELD FINGERS BETWEEN ROLLERS LEFT HAND & FINGERS WERE BRUISED

APPARENTLY THE PALLITIZER HAD STOPPED & INJURED WAS LOOKING TO SEE WHAT HAPPENED. IT APPEARS THE ELECTRIC EYE NEEDED CLEANING. WHEN HE CLEANED THE EYE IT ACTIVATED THE MACHINERY, PINCHING HIS ARM IN THE MACHINERY.

EE WAS HOISTING SCREEN PARTS TO SCREENDECK, HE WAS USING A TOW CABLE AND CHAIN, THE CABLE ON WINCH CUT AND BRUISED HIS SMALL FINGER.

EMPLOYEE WAS TRYING TO DETERMINE WHERE CHUTE WAS LEAKING. PERLITE THAT WAS LEAKING FROM CHUTE BLEW INTO HIS EYE. NO FOREIGN PARTICLE FOUND, INFLAMMATION OF UPPER EYELID, PRESCRIPTION MEDICINE WAS USED.

EE WAS CHIPPING AT WELD A PIECE OF SLAG WENT UNDER HIS SAFETY GLASSES INTO HIS EYE. CORNEAL ABRASION EE WAS WEARING SAFETY GLASSES 3-27, 3-28, AND 3-29 SCHEDULDED DAYS OFF.

EMPLOYEE WAS ADJUSTING STRETCH WRAP MACHINE. WRAP CAUGHT FINGER AND PULLED IT INTO ROLLS, CAUSING INJURY TO HIS RIGHT INDEX FINGER. FLESH WAS PULLED BACK FROM TIP OF FINGER.

EMPLOYEE WAS WELDING A PIECE OF METAL SLAG CHIPPED OF METAL & GOT INTO HIS EYE FILED LATE DUE TO CONFUSION OF EYE TREATMENT

EMPLOYEE WAS STANDING ON A LADDER PATCHING THE HOT LINE ON #2 MILL. HE BENT BACK AND TWISTED TO WELD THE HOT LINE AND PULLED BACK.

EMPLOYEE WAS WORKING NEAR ANOTHER MECHANIC THAT WAS WELDING NEAR HIM,EMPLOYEE ACCIDENTALLY LOOKED AT WELDING ARC.FEBRUARY 29 AND MARCH 1 WERE HIS SCHEDULED DAYS OFF.

EE WAS PERFORMING A WELDING JOB, HE CLAIMS THAT A PIECE OF PERLITE MUST OF BEEN STRUCK TO HIS EYE OR EYE BROW. ALLEGED PERLITE PARTICLE THAN ENTERED HIS EYE.

WORKING ON 00-000 PUMPING SYSTEM WHEN CAP ON LINE BLEW OFF HITTING EMPL ABOVE LEFT EYE.

AS HE WAS PACKING BAGS, A BAG BURST FILLING HIS EYE WITH DIATOMACEOUS EARTH. HE HAD ASLO NEGLECTED TO KEEP THE PROPER HEIGHT ADJUSTMENT ON THE EQUIPMENT TO MATCH THE BAG.

EE WAS CONNECTING BLOWER LINE TO THE NEW 1 BAGHOUSE, HE BUMPED HIS ELBOW ON THE CORNER OF THE PIPE LINE WHILE BEING MOVED IN THE MAN CAGE. TOLD TO KEEP ARMS INSIDE CAGE WHILE IT MOVING HE BUMP ED IT ON FRIDAY 21, REPORTED IT SATURDAY 22, BUTSAID IT DID NOT BOTHER HIM THURSDAY 27, MADE APPT WITH DR BECAUSE ELBOW WAS SWOLLEN.

EE WAS PERFORMING METAL FABRICATION CUTTING TORCH LEAKED AT HEAD AND BURNED RIGHT LEG.

EMPLOYEE WAS PUTTING BUCKETS ON ELEVATOR USING IMPACT WRENCH PIECE OF RUST CHIPPED OFF BUCKET

EMPL WAS STANDING ON LADDER WELDING PLUGS TO HOLD CERAMIC TILES INDIE CONE. AS HE WAS ON LADDER WELDING HE TWISTED BACK.

PACKING BAGS SEAM BURST SENDING OUT MATERIALS IN AIR GOT IN EYE

EMPL WALKING TO WORKPLACE.TRACTOR RAN OVER A BOARD,IT SPRANG UP AND HIT HIM ON LEG.BRUISE ON LOWER LEFT LEG.

AS HE WAS PALLITIZING THE PIT LID STUCK WHEN IT FREED IT SHOT BACK & CAUGHT HIS FINGER ON THE SUPPORT POST FOR THE PALLETE ROLLERS

EMPLOYEE WAS WALKING THRU SHOP PAST GRINDER. A PIECE OF SLAG FLEW FROM GRINDER PAST AND BEHIND SAFETY GLASSES INTO LEFT EYE.

EMPLOYEE TOOK A DANGEROUS POSITION. BRAKE ON CRANE HOIST SLIPPED WITH WEIGHT OF TANK AS THE TIE WAS BEING PUT INTO PLACE. CRANE WAS SETTING A TANK ON CROSS TIES. EMPLOYEE PLACED HAND IN A DAN GER AREA AND LEFT HAND WAS MASHED.

EMPL USING CUTTING TORCH WHEN CUFF OF GLOVE CAUGHT ON CUTTING TIP AND BURNED ARM.

CONJUNCTIVITIS PRESCRIPTION PRESCRIBED.EMPLOYEE WAS PACKING DICAPERL FUGITIVE DUST FROM PACKER BLEW INTO EYE.

EMPL WAS USING GRINDER & GOT SOMETHING IN RIGHT EYE. EMPL WAS WEARING SAFETY GLASSES.

CUTTING UHMW WITH BAND SAW HIT SAW BLADE WITH THUMB

THEY WERE REMODLING THE BAG BELT TO PUT IN BAG TAPER. WHILE CUTTING ON THE BELT FRAME A PIECE OF METAL FLEW OFF AND WENT INTO HIS EAR.

EMPLOYEE WAS USING AIR ARC TO CUT OFF A BLR. LINNER. AS HE WAS CUTTING A HOT PIECE OF METAL FELL OFF AND FELL ON THE MPLOYEE'S LEFT FOOT.

WELDING HOOD LET LIGHT IN & EYES WERE EXPOSED TO ARC