Buscar en el registro

The employee was cutting a metal plate using a grinder equipped with a metal cutting wheel. A piece of debris went under EE's face shield & safety glasses & landed in EE's left eye.

Employee had just finished cutting a bent handrail with cutting torches. EE hit EE's left forearm on the handrail and received a laceration. The laceration required three sutures.

Employee was using a torch to melt ice when the torch turned in his left hand and the flame went across the back of his right hand. He suffered a 2nd degree burn.

The employee was cutting a hole in a chute using cutting torches when a piece of metal got behind his cutting safety glasses and went into his left eye. He went to the ER and was told he had scratched his eye. They did not remove anything from his eye at the ER, but he was given prescription eye drops.

Employee was using cutting torches when a piece of hot metal got behind his goggles and into his eye. He went to the Emergency Room on 05/14/2013 and they removed the material from his eye and gave him a prescription for eye drops.

Using compressed air to get bulk cement flowing and when it did, it got into his eyes.

EE was operating a air powered jackhammer. EE was removing built up cement debris. A solid piece propelled toward his face and somehow got behind his safety glasses.

Removing a lock from an adjustor with an impact wrench. The heat created pressure, which pushed the impact wrench into the mans chest. He was taken to hospital to be checked for possible internal injuries, which were not apparent at the time of the injury. He will be out of work until Oct 20 to be sure any trama to kidney or liver is healed.

The man was welding when the steel he was welding fell on the top of his right foot causing a severe bruise. He will be on light duty until the pain and swelling subside.

Employee was unplugging Dense Phase Spill Pump. Cement Pulsed out of inspection door when convey cycle started.

The injured man was cutting a plate when a hot chip fell into his glove and caused a second degree burn to his left wrist. No work missed but he will be on light duty until the wrist heals.

The men received a hairline fracture to left arm when a tension bolt suddenly broke one when he was removing it. will be off work 1 week due to holidays and weekend should return following wednesday.

THE INJURED MAN WAS REMOVING A NUT. WHEN THE SPINNING NUT CAME FREE FROM THE BOLT IT CONTACTED HIS LEFT MIDDLE FINGER CAUSING A CUT WHICH REQUIRED A STITCH.

THE INJURED MAN WAS HIT ON RIGHT LEG BY A FALLING ROCK. HE WAS CHECKED AT ER AND FOUND ONLY TO HAVE SUSTAINED A BRUISE. HE WAS GIVEN PRESCRIPTION FOR PAIN AND RELEASED BACK TO WORK.

EE WAS OPERAITNG BC CAT EXECAVATOR WHEN HE FELT PAIN IN LOWER BACK WENT TO DR. AT NOON TIME. HE IS GOING TO BE SCHEDULED FOR THERAPY IN THE FUTURE HE IS NOW ON VACATION (1 WEEK) AND IS TO RETU RN TO JOB NO RESTRICTIONSL; THIS FORM BEING FILED PER INSTRUCTION OF DENNIS YESKO PENDING WORKCOMPS ACCEPT OR DENIAL

PLANT UNDER MAJOR REPAIR, EMPLOYEE HELPING REPAIRMAN, LOCATION UNKNOWN. SENT TO EYE DOCTOR, REMOVED SMALL PIECE OF SLAG.

BIT RELEASED FROM SMALL AIR CHIPPING HAMMER FINGER PINCHED BETWEEN METAL AND HAMMER BIT. SMALL CUT RESULTED, SENT TO HOSPITAL AND GOT STITCHES.

THE MAN WAS CUTTING WITH A TORCH WHEN A HOT SPARK BURNED HIS LEFT EAR. WAS GIVEN ANTI-BIOTICS TO PREVENT INFECTION. NO LOST TIME AND NO HEARING DAMAGE EXPECTED.

THE INJURED MAN WAS WELDING WHEN HE ACCIDENTALLY STRUCK AN ARC ON A SIDE FRAME BEFORE HE WAS READY TO WELD. SOME HOT GREASE SPLASHED INTO HIS EYE CAUSING HIM TO LOOSE 4 DAYS WORK BEFORE RETURN ING TO NORMAL DUTY.

THE INJURED MAN WAS OPERATING THE GARDNER DENVER DRILL WHEN A SMALL STEEL SPLINTER STRUCK HIM IN THE RT THIGH. HE REMOVED THE SPLINTER HIMSELF AND RECIEVED A TETNAS SHOT THE NEXT DAY.

THE MAN WAS WELIDING A BEAM WHEN AN UNEXPECTED FLASH BURNED BOTH EYES.

BENDING PIECE OF STEEL IN ROLL BENDER. HAND ENTRED. BENDER GLOVE CAUGHT ON STEEL PULLING HAN DIN BENDER. FINGER TIP TO WRIST SENT TO HOSPITAL FOR X-RAYS. NO BROKEN BONES.

THE MAN BUMPED HIS ELBOW ON A CONTROL BUT EXPERIENCED NO IMMEDIATE PROBLEMS ON JUNE 9 HE WENT TO THE DR AND WAS TREATED FOR TENDONITOS OF THE ELBOW.

REPAIRING ELEVATOR-SMALL PIECE OF STEEL 1/4" X 1/8" FLEW FROM BEARING -PASSED THROUGH GLOVED HAND LAYED BY BONE IN L/WRIST HOSPITAL TO HAVE SAME REMOVED -STITCHES -LIGHT DUTY.

REPAIRMAN HELPING REPAIR #3 KILN TANK. INJURED RECEIVED WELD FLASH TO BOTH EYES. SENT TO HOSPITAL FOR TREATMENT 12-28-93.

MAN COMPLAINED THAT BACK WAS SORE ABOUT MIDWAY THROUGH SHIFT. HE WENT TO DOCTOR FORA TREATMENT AND WAS ABLE TO RETURN TO WORK AFTER TWO WORK DAYS AND A WEEKEND OF REST.

AIR LANCE CAME APART & SMALL PARTICAL OF DIRT GOT IMBEDDED IN R/EYE -SENT TO EYE DR TO HAVE SAME REMOVED

WELDING ANCHOR BOLTS TO OUTSIDE #2 KILN TANK RECEIVED WELD FLASH. INJURED UNAWARE UNTIL BEDTIME. WENT TO HOSPITAL ON 8-11-90 FOR TREATMENT. "NO ACCIDENT REPORT MADE OUT".

REPAIRING SLURRY PUMP SMALL PIECE OF HOT SLAG ENTERED INJURED SHOE BURN RESULTED TO L/FOOT BETWEEN 3RD & 4TH TOE

CLEANING PIECE OF STEEL AND SMALL PARTICLE FLEW BEHIND SAFETY GLASSES AND INJURY RESULTED.SENT TO HOSPITAL FOR TREATMENT.

MAN WAS REPAIRING A BROKEN PALLET WITH A NAIL GUN AND ACCIDENTALLY PUT A NAIL THROUGH HIS LEFT INDEX FINGER.

WELDING HANGER #2 COOLER. DUST IN EYES-CLEANED OK. BY 6-22-89 EMPLOYEE COMPLAINED OF SOMETHING IN R/EYE-COULDN'T BE SEEN-SENT TO EYE DR.-REMOVED SMALL PIECE OF SLAY UPPER EYE LID.

USING 90 LB JACKHAMMER TO REMOVE BUILT UP MATERIAL STOPPED TO REST AND JACKHAMMER FELL OVER STRIKING EMPLOYEE ON LOWER SHIN SENT TO HOSPTIAL REQUIRING 5 STITCHES.

MAN WAS CUTTING3STEEL PLATE WITH A CUTTING TORCH PIECE THAT HE CUT OFF FELL & STRUCK HIM ON THE FOOT CAUSING A BRUISE

RUNNING, SHUT F9EDER ELECTRIC CONTROL OFF, DUE TO SPILLAGE & PULLED L/LEG CALF MUSCLE. WENT TO HOSPITAL EMERGENCY ROOM 4-20-87 AND DR ADVISED TO STAY OFF LEG FOR 7 DAYS

A STEEL SPLINTE9 FROM THE ROTATING DRILL STRUCK THE DRILLER IN THE LEFT EYE. NOTE: PROTECTIVE GLASSES WERE BEING WORN. SPLINTER WAS REMOVED BY DR AND DRILLER IS BACK TO WORK WITH NO LOST TIME

I.NAME WAS GRIN8ING ON THE GRINDING WHEEL WHEN SOME OF THE GRIT FROM THE WHEEL WORKED ITS WWAY BEHIND HID SAFETY GLASSES & INTO HIS RIGHT EYE.

INJURED MAN HAS3OPERATED THE EXCAVATOR WITH HYDRAULIC HAMMER FOR BREAKING OVERSIZ RIP-RAP. THE CONTINUOUS HAMMERING AGRAVATED THE LOWER BACL

THE INJURED MAN3WAS WELDING ON THE DECK OF A BARGE WHEN HE FELL DOWN & BRUSIED HIS TAILBONE.

INJ DRILLING SH2T HOLES WITH ROTARY AIR DRILL WHEN HE WAS STRUCK ON LOWER LEFT LEG BY LIMESTONE ROCK WHICH VIBRATED OFF LOW WALL WHICH HE WAS DRILLING NEXT TO.DRILLER LOWER LEFT LEG BROKEN.

A COWORKER WAS CUTTING WITH A TORCH AND DID NOT SEE THE INJURED MANANDACCIDENTALLY BUMPED HIM WITH THE TORCH. THIS CAUSED A BURN ON THE LEFT ARM.

THE INJURED MAN REMOVED HIS HEAVY OUTER SHIRT BECAUSE HE WAS TOO WARM, HE LEFT IT OFF FOR ABOUT ONE HOUR. THE UPPER UNTANNED PART OF HIS ARMS BEGAN TO FEEL BURNED SO HE PUT HIS SHIRT BACK ON. UTRA VIOLET RAYS FROM HIS WELDER HAD GIVEN HIM A BURN THAT LATER THAT DAY BLISTERED.