Buscar en el registro

EE WAS LOADING SHOT ROCK WITH A HYDRAULIC FRONT SHOVEL. WHEN HE DROPPED A BUCKET FULL OF ROCK INTO THE BED OF A HAUL TRUCK A LARGE ROCK APPROX. 12"X6"X4" BOUNCED UP OUT OF THE TRUCK BED, CAME THROUGH THE SHOVEL'S WINDSHIELD(SHATTERING IT) &STRUK HIM ON HIS RIGHT KNEE.

EE WAS REPAIRING OUR SAND TANK (REPLACING STEEL PLATE IN SIDE OF TANK.). USING WELDING TOOLS INCLUDING A GRINDER, WHEN HE WENT TO THE DR'S THEY FOUND A PIECE OF METAL IN HIS LEFT EYE.

HE WAS ASSISTING IN MOVING PIPE TO BE WELDED AND MUST HAVE LOOKED AT WRONG TIME.

EMPLOYEE WAS USING A CUTTING TORCH CUTTING HOIST CABLE OFF OF DRAGLINE. WHEN A PIECE SLAG HIT HIM IN THE FACE GOING UNDER HIS SAFETY GLASSES AND HIT HIM IN THE EYE.

OUR MAINTENANCE MAN WAS WELDING AND INJURED STOPPED BY TO HAVE SOMETHING WELDED. HE WAS THERE APPROX. 10 MIN. THAT EVENING WHILE SLEEPNG HE NOTICED STRONG BURNING SENSATION IN EYES (FLASH BURN ). WENT TO EMERGENCY ROOM AND WAS TREATED ACCORDINGLY.

WELDING ON FIELD FEEDER HELMET FELL OFF HEAD.

CUT HOIST CABLE ON DRAGLINE TO GET WEDGE OUT AND SLIPPED, PUT HAND ON DRUM AND BURNT IT.

WAS USING A DIE GRINDER ON A DRAGLINE DRUM A PIECE OF STONE HIT HIM IN EYE.

LAYIG ON SIDE USING A CUTTING TORCH. HOT SLAG FELLINOT EAR

EE WAS HOLDING A PIECE OF STEEL FOR THE WELDER. THE FLASH FROM THE WELDING ARC, IRRITATED HIS EYES.

WELDING ON STUFFING BOX ON DREDGE, EYES GOT BURN OFF OF REFLECTION ON WATER.

EMPLOYEE WAS CHECKING JAW AND CRUSHER WHEN A ROCK FELL AND STRUCK THE RIGHT HAND SMASHING HIS PINKY FINGER END, FRACTURING HIS FINGER AND REQUIRING STITCHES.

EMPLOYEE WAS OPERATING A MAGNETIC DRILL PRESS WHEN A STRING OF HIS GLOVE GOT WOUND UP IN BIT PULLING HIS FINGER INTO BIT.

WELDING FRAME, WELDING WAS STARTED BEFORE EE HADA CHANCE TO PUT HIS SHIELD DOWN. WELDING BURNS TO BOTH EYES, CAUSES ILRRITATION.

BANK CAV ED OFF CAUSING CRANE TO GO INTO WATER EMPLOYEE REQUIRED STITCHES ON LEFT CHEEK & END OF FINGER

USING CUTTING TORCH, CUTTING TORCH WENT OUT. IN AN ATTEMPT TO RE-LIGHT THE TORCH HE BROUGHT THE TORCH BACK ACROSS HIS HAND. NOT AWARE HIS GLOVE WAS ON FIRE, TORCH IGNITED AND BURNED HIS LEFT HAND.

EE HAD QUIT WELDING & HAD REMOVED HOOD, THE TIP OF THE MIG WELDER EXPLODED SENDING OBJECT INTO EE'S EYE.

USING CUTTING TORCH, SPARKS FLEW INTO RIGHT EYE.

ROCK WAS PLUGGED IN JAW CRUSHER. USED AN IRON BAR TO PRY ROCK LOOSE. WHEN ROCK BROKE LOOSE, JAW CRUSHER FORCED IRON BAR ONTO BELT AND YANKED IT FROM HAND CAUSING INJURY TO LEFT INDEX FINGER. F INGER IS BROKEN.

I WAS WALKING BY THE JAW CRUSHER WHEN I SEEN TORCH SPARKS LOOKING UP TO SEE WHERE THEY WERE COMMING FROM ONE WENT INTO MY LEFT EYE.

TWO OTHER EE WERE WELDING A SCREEN ON THE PLANT AND EE MUST HAVE BEEN WATCHING AND GOT FLASH BURNS TO HIS EYES.

REPAIRING DIRECTIONAL ROD IN DIAMPHRAGM PUMP. PUMP ACTUATED SMASHING FINGER BETWEEN WASHER AND PUMP BODY. TOOK THREE STITCHES IN EMERGENCY ROOM TO CORRECT THIS.

INJURED WAS USING A CUTTING TORCH ON A PIECE OF STEEL.THE STEEL STARTED TO FALL GE BRABBED FOR IT WITH THE OTHER HAND AND HIS WRIST WAS BURNED BY THE TORCH.

ASPAHLT VALVE STUCK OPEN FILLING MINER BOX UP LIQUID S SPLSHED ON R ARM

EE WAS REMOVING UNDER DRAG CABLE WHEN CHUTE SLIPPED TO PINCHET FINGER.

EMPLOYEE WAS CUTTING A PIECE OF STEEL 5/16INX8FT LONG WITH A TORCH WHICH WAS ON A STEEL TRUSSEL AFTER THE JOB WAS COMPLETED THE PIECE FELL 261/2IN ON HIS RIGHT FOOT BRUISING TOP OF HIS FOOT & FRACTURING HIS BIG TOE

CONTACTED ONE CONVEYOR AND WE WERE REPLACING END SECTION OF CHUTE WITH CRANE WHICH HAD TO BE LOWERED BETWEEN TWO CONVEYORS AND STARTED TO FALL GOT OUT OF ITS WAY BY GOING TO CATWALK THE END S ECTION HIT CATWALK FOLDING IT UNDER AND THROWING ME INTO AIR I FELL LANDING ON MY FEET FRACTURING LT ANKLE AND VERTIBRAE IN BACK