Buscar en el registro

Cummulative trauma to lower back from operating loader and running the #2 sand plant for many years.

While cutting a hole in metal plate, metal "popped", causing slag to enter clothing at open neck. Hot slag ran down chest and abdomen, causing burns.

PULLED HANDLE DOWN AND CAUGHT END OF LEFT THUMB AGAINST MATERIAL AND BRACE USED TO HOLD THE MATERIAL IN PLACE WHILE CUTTING.

CLAIMED RAN OVER LARGE ROCK BURIED IN THE DIRT PILES AND GROOVES ON 10-21-03. DID NOT REPORT INJURY UNTIL CAME ON SHIFT ON 22ND.

EMPLOYEE REPORTED TO HIS SUPERVISOR ON 10/25/02 CUMULATIVE INJURY STARTING ON 10/17. CLAIM WAS UNDER INVESTIGATION BY INSURANCE COMPANY. 6/5/03 ADVISED CLAIM WAS WORK RELATED.

EE WAS HOLDING IMPACT GUN THAT WAS STILL ATTACHED TO FRAMEWORK WHEN THE FRAMEWORK "JERKED", WRENCHING EE'S SHOULDER.

SCRAPER BOTTOMED OUT.

CUT/ PUNCTURE. SOCKET SLIPPED OFF NUT AND STRUCK HAND.

CUT/PUNCTURE/SCRA-A PIECE OF WELDING ROD IS USEDTO SECURE THE SOCKET OF THE WRENCH ONTO THE SHANK EE HAD HIS HAND ON THE SOCKET, WHEN HE STARTEDTHE WRENCH, THE ROD CUT INTO EE'S HAND

INJURED BY MOVING EE BUMPED THE AIR RAM SWITCH WHILE POSITIONING A PIECE OF METAL. THE SWITCH ACTIVATED THE RAM WHICH CLOSED A CLAMP ON THE TIP OF HIS THUMB.

STRUCK/INJURED. AIRLINE WAS STILL CHARGED WITH AIR WHEN CLAMP CAME OFF. DIRT BLEW INTO EMPLOYEE'S EYE.

A CRANE WAS BEING USED TO PULL A RUBBER FLAP (ABOUT 14 FT LONG) IN A CONVEYOR. THE END OF THEFLAP WAS BURIED IN THE MUD. THE TOP OF THE FLAP HAD A METAL BAR ON IT. WHEN THE FLAP CAME FREE, IT JUMPED UP AND CAUGHT EE'S FINGER.

WAS PUTTING TOOLS AWAY IN A GANG BOX, LOOKED UP,SOME DIRT PARTIALS FROM SHAKER GOT INTO HIS EYE. SCRATCHED CORNEA OF EYE.

THE SLACK WAS BEING PULLED OUT OF THE CONVEYOR BELT USING A CABLE. THE CABLE WAS RUNNING THROUGH A SNATCH BLOCK. THE CHAIN SNAPPED & THE SNATCH BLOCK RELEASED & HIT EE IN THE LEG.

PRELIMINARY INFO: EE WAS IN THE PROCESS OF SHUTTING OFF A WELDING TORCH WHEN THE TORCH APPARENTLY MADE A VERY LOUD, BOOMING NOISE.

EMP SLIPPED WHILE HE WAS WORKING IN THE HOPPER. WHEN HE SLIPPED, THE 4" HAND GRINDER HE WAS USING MADE CONTACT WITH HIS KNEE.

I.NAME LAYING ON LEFT SIDE USING WELDING TORCH TO BURN RAIL TRACKS. SMALL PIECE OF METAL FLEW IN EAR.

I.NAME LYING FACE-UP OVER TOP OF A WHEEL WHILE STEAMCLEANING PIECE OF EQUIPMENT AND FELT A PULL IN BACK.

OVER A PERIOD O9F TIME I NAME HAS BEEN BANGING HIS KNEE ON THE INSIDE OF TH CAB OF THE DOZER THIS HAS CAUSED SWELLING & SORENESS

I NAME WAS PUSHING ON A BLADE LEVER WHILE OPERATING THE DOZER & FELT PAIN IN H IS HAND

EMPL WAS WELDING THOUGHT HE HAD SUSTAINED A FLASH IN HIS EYE WENT TO DR AND HAD EYE FLUSHED PAIN PERSISTED SO NEXT DAY HE RETURNED TO DR WHO THEN FOUND A STEEL SHAVING IN EYE PERSON WAS WEARIN G SAFETY EQUIPMENT AT TIME OF INCIDENT

USING ELECTRIC HAND DRILL. DRILL BECAME "HUNG UP" ON METAL, CAUSING RESISTANCE.

WHILE GRINDING A BUR ON A HOIST CABLE CAUGHT FINGER IN GRINDER

WHILE WELDING O3 A DOZER BLADE FOREIGN OBJECT BLEW INTO LEFT EYE

WELDING RAILCAR2FOREIGN OBJECT FELW IN EYE.EMPL WAS WEARING SAFETY GLASSES.

INJURED PLACED 5 LENGTH OF 4"X4"LUMBER THROUGH THE ROOM OF A DRILL RIG WHILE IN THE VERTICAL POSITION.THE PURPOSE OF THE ACTION WAS TO SUPPORT THE DRILL STEEL WHEN THE BOOM WAS LOWERED TO THE HORIZONAL POSIT3ON.THE DRILL STEEL WAS LOWERED INTO THE HOLE CAUSING THE LUMBER TO CATCH.

INJURED WAS HOLDING SOME STEEL IN PLACE FOR WELDING AND RECEIVED ARC FLASH DURING THE WELDING PROCESS.

INJURED WAS WORKING ON BOTTOM SIDE OF A RAILCAR USING A SCARFING TOOL, HE REMAINED IN ONE POSITION FOR SOME DURATION KNEELING AND REACHING UP TO THE WORK. IT WAS EARLY IN THE DAY & COOL. INJUR ED MOVED AFTER A WHILE & FELT SHARP PAIN BETWEEN THE SHOULDER BLADES & SUSPECTED SOME FORM OF HEART ATTACH

LONG LETTER... OTHER EMPL POSITIONED BEHIND CAB OVER TRANSMISSION AND COULD SEE EMPL HAND AND COMMUNICATE.EMPL OPERATED BOOM DOWN SWITCH AND BOOM KEPT COMING DOWN AND PINNED HIM TO FLOOR OF TR UCK.LOST CONSCIOUSNESS.EMPL SUFFERED BRUISES.