Buscar en el registro

WHILE INSTALLING THE TRACK ON THE 34 SHOVEL, EMPLOYEE WAS SPOTTING THE SHOVEL AND WAS STRUCK IN THE CHEST AREA BY A PIECE OF METAL. THE PIECE CAME OFF THE TRACK OR IDLER. THE EMPLOYEE WAS STANDING ABOUT 30 FEET AWAY. HE REMOVED THE METAL AND WAS TAKEN IN FOR TREATMENT, RECEIVED STITCHES AND WAS TOLD NOT TO WORK THE NEXT DAY.

THE EE INDICATED ON 3/16/03 THAT HE HAD RECEIVED DUST IN HIS EYE WHILE CHANGING AN ELECTRICAL OUTLET IN THE TANKHOUSE. HE STATED THAT HE FELT THE OVERHEAD CRANE WORKING NEARBY WHICH CAUSED DUS T FROM A SUPPORT BEAM ABOVE HIM TO FALL AND ENTER INTO HIS EYE. THE EE DID NOT REPORT THE INCIDENT THAT DAY, UPON REPORTING, HE WAS TAKEN TO A DR. & DIAGNOSED W/A MINOR CHEMICAL BURN.

EE DID NOT CAM OVER CLAMP. MACHINE VIBRATION KNOCKED THE CLAMP BACK IN CLOSED POSITION.

THE EE STATED HE SAW SOME B0 STARTER SHEETS THAT WERE BUNCHED UP ON ONE CORNER. HE WAS GOING TO REJECT THEM AND AS HE PICKED UP THE BUNDLE, ONE SHEET FELL AND STRUCK HIS LEFT KNEE.

EE USING METAL SHEARER PLACED BOTH HANDS BEYOND THE GUARD AND INADVERTENTLY ACTIVATED THE SHEARING MACHINE, SUSTAINING MULTIPLE INJURIES TO HIS HANDS.

EE WAS REMOVING CHAINS AND BOOMERS FROM FUSING MACHINE THAT WAS MOUNTED ON BOOM TRUCK. HE WAS NOT WATCHING WHERE OUTRIGGER WAS COMING DOWN, PINCHING HIS LEFT FOOT UNDER RR OUTRIGGER. BOOM TRUC K OPERATOR WAS AT DRIVER'S SIDE (LEFT) CONTROL STATION.

EMPLOYEE WAS REMOVING LINER. HE WAS WELL AWAY FROM HYDRAULIC ROCKE BREAKER HAMMER. EMPLOYEE WAS STRUCK IN THE ABDOMEN WITH A PIECE OF LINER, CAUSING A LACERATION.

THE DIPPER DOOR TRIPPED AS IT SWUNG TO LOAD AND EMPTY TRUCK. MUCK HIT THE BED OF THE TRUCK, CAUSING IT TO RAISE AND THEN DROP.

WORKING ON SAG 2 DISCHARGE END TAKING OUT BOLTS WITH 90 POUND JACKHAMMER AND WAS HOLDING A TOOL AND PULLING AT THE JACKHAMMER WHEN IT SLIPPED AND PULLED THE EMPLOYEE'S ARM BACK. DID NOT SEEK M EDICAL ATTENTION UNTIL OCTOBER 5, 1999.

CREW WAS UNBOLTING PUMP & MOTOR FROM BARGE, BECAUSE OF UNEXPECTED MOVEMENT EE WAS PINNED BETWEEN MOTOR AND BARGE BRACE.

THE EE HAD FINISHED CUTTING A CATHODE SAMPLE AND PLACED IT ON THE TABLE AND WENT TO GET A SAMPLE BAG. THE BLADE WAS STILL WINDING DOWN WHEN HE ACCIDENTALLY PLACED HIS FINGER ON THE BLADE.

EE WAS OPERATING BOOM TRUCK. INJ EE WAS STANDINGWHERE HE COULD WATCH CABLE AS OTHER EE RETRACTEDBOOM & CABLE. INJ EE HAD HIS FINGERS IN A HOLE IN THE SIDE OF THE BOOM HOLDING ON. WHEN BOOM WAS RETRACTED TO THAT POINT IT SMASHED EE'S FINGERS.

WHILE LOADING AT SHOVEL, THE EMPLOYEE HIT HSI ARM AND SHOULDER WHEN A BOULDER FELL OFF OF THE SHOVEL DIPPER LIP HITTING THE REAR OF THE TRUCK BED. THE BOULDER JARRED THE TRUCK AND CUASING THE DRIVER TO HIT HIS ARM ON THE STEERING WHEEL.

THE EMPLOYEE WAS CLOSING THE STRONG BACK ON THE HARVEST WHEN THE LEVER CAME DOWN PINCHING THE MIDDLE FINGER OF THE RIGHT HAND. HE WAS EXAMINED AND RELEASED TO FULL DUTY THAT DAY. ON 5-28-98, E MPLOYEE REPORTED SWELLING, WAS TAKEN IN FOR ANOTHER EXAM, X-RAY STILL NEGATIVE, ACE BANDAGE AND SPLINT APPLIED. RESTRICTED DUTY.

EMPLOYEE WAS CUTTING A PIECE OF 16 INCH DRISEE PIPE WITH A CHAINSAW AND HAS HIT IN THE LEFT LEG WITH THE PIPE WHEN HE CUT THROUGH IT.

EE COMPLAINES OF PAIN AND NUMBNESS TO FINGERS, PAIN TO LEFT WRIST, PAIN IN ARM AND SHOULDER AS A RESULT OF OPERATING ELECTRIC SHOVELS.

EE WAS SENT TO WASH BAY, TO RELAY A MESSAGE. WHILE THERE HE BEGAN STEAM CLEANING HIS BOOTS. HE LLOST CONTROL OF THE WAND AND THE STEAM SPRAYED THE RIGHT ANKLE.

EE HAD CUT OFF A ROCK GUARD & LET IT FALL TO THE FLOOR. THE ROCK GUARD BOUNCED & STRUCK THE EE'S LEFT LITTLE TOE.

WHILE USING 1/2" IMPACT, EMPLOYEE ALLEGES HIS IGHT WRIST STARTED TO HURT. REQUESTED TREATMENT 5-11-98, CAUSATION INVESTIGATION ONGOING.

REPLACING A TRAMP CYLINDER ON DRY CRUSHER, SAFETY BLOCK POPPED & STRUCK EE'S HARD HAT, WAS PUSHED DOWN TOWARDS HIS RIGHT SIDE OF HIS FACE & LACERATED THE CHECK.

EE WAS TIGHTENING A BATTERY CABLE CONNECTION ON A WELDING MACHINE. HE DROPPED HIS WRENCH, WHILE HE WAS KNEELING. ATTEMPTING TO STAND. HIS LEFT RING FINGER FIRST DISTAL CAME IN CONTACT WITH THE FAN.

EE STATES WHILE PULLING A DRILL PIPE OFF THE TRUCK. THE HOOK ON THE WINCH LINE SLIPPED OUT OF THE BOX END OF THE PIPE STRIKING EE ABOVE THE RIGHT EYE CAUSING A LACERATION.

EE WAS USING A ROTARY DRILL TO DRILL HOLES, WHEN THE DRILL STUCK IN THE HOLE. THE DRILL SPUN AROUND AND HIT THE EE ABOVE THE RT EYE WITH THE HANDLE.

BOOM TRUCK OUTRIGGER PAD WAS LOWERED ONTO EMPLOYEE'S FOOT.

WHILE USING A CHIPPING HAMMER, A METAL SLIVER 1/8" LONG PENETRATED HIS LEFT GLOVED THUMB. THE SLIVER WAS REMOVED AND THE WOUND WAS SUTURED.

EMPLOYEE WAS USING SKILL SAW WHILE CUTTING A 2X4 FOR FRAMING & THE SKILL SAW BLADE HIT A NAIL & A PIECE OF METAL FROM BLADE OR NAIL WENT BETWEEN SAFETY GLASSES & EYE LID & INTO EYE

WAS USING A CHAIN SAW TO CUT TREES ON A STEEP SLOPE WHEN EMPLOYEE SLID AND HIT LEFT LEG WITH CHAIN SAW AND CUT LEG ABOVE KNEE. CUT ABOUT 5" LONG AND 1" DEEP.

ARC WELDING REFLECTION BURNED LEFT EYE. ALSO HAD METAL PARTICLES IN EYE FROM GRINDING METAL.

EE WAS OPERATING A HAND GRINDER WHEN THE AIR HOSE TANGLED ON THE EDGE OF A TIRE HANDLER. HE LOST CONTROL OF THE GRINDER WHEN HE PULLED THE HOSE AND INJURED HIS RIGHT INDEX FINGER.

INJURED WAS WELDING ON A DIFFERENTIAL COVER WHEN HOT METAL POPPED BACK ON HIS NECK.

SPOT WELDING ON BEAM CLAMP ON PLATE TO HOLD IT DOWN CLAMP BROKE HIT EMP ON L FRONT TOOTH

HE WAS SITTING IN A 190 TON MUCK TRUCK CAB WAITING TO BE LOADED. WHEN THE FIRST SHOVEL DIPPER WAS LOADED IT CAUSED THE TRUCK TO JAR HIM IN THE CAB.

WHILE USING AN IMPACT WRENCH TO REMOVE A BOLT OUT OF A MOTOR GRADER CUTTING EDGE,INJURED CUT HIS LEFT MIDDLE FINGER WHEN THE SQUARE HEAD BOLT POPPED OUT.

I NAME WAS USING AN IMPACT WRENCH TO TIGHTEN BOLTS ON THE #783 PCR WHEN THE IMPACT GOT STUCK I NAME THEN PULLED THE WRENCH & THE RACHET PART CAME OFF & HIT HIS RT LITTLE FINGER

WHILE EMPLOYEE WAS FUSING 18" PIPE THE PIPE POPPED OUT OF FUSING MACHINE AND HIT HIM DIRECTLY ON THE CHEST.

HELPING LOAD LOWBOY ONTO TRAILER. PUT PIPE UNDER DOUGTAIL. OTHER MAN LOWERED DOUGTAIL. IT HIT I.NAME'S LEFT KNEE DUE TO EMPLOYEE NEGLECT.

EE WAS LOCKING THE STRONG BACK WHEN THE ARM GOT LOCKED UP AND THE ARM CAME BACK AND HIT HIM ON THE SIDE OF THE FACE AND KNOCKED HIM DOWN.

STRONGBACK BUCKET OF CRANE GOT STUCK AND HE WAS WIGGLING IT BACK AND FORTH TO GET IT FREE WHEN IT CAME LOOSE AND JAMMED INTO HIS RIGHT HAND, JAMMING HIS FINGERS.

RE LEVELING RIG AFTER PUSING A PIECE OF CASING IN GROUND. LEFT HAND INJURED BY 1INCH X 12 INCH PIECE OF PLATE.

THE INJURED WAS OPERATING A DOZER TO PULL A DISABLED MUCK TRUCK WHEN THE PULLING CABLE BROKE CAUSING INJURED TO GET JOLTED IN THE DOZER CAB.INJURED RETURNED TO WORK ON THE DAY OF THE ACCIDENT BUT WAS ADVISED BY HIS DOCTOR TO STAY OFF FROM WORK ON NOVEMBER 30,1989,WHEN HE STARTED LOSING TIME.

HE WAS BACKING A CHERRY PICKER FROM A RESERVIOR WHEN THE ENGINE DIED CAUSING HIM TO LOSE CONTROL AND HIT A BANK WITH THE REAR TIRES. THE CHERRY PICKER TRUNED ON ITS SIDE BUT HE REMOINED IN TH E CAB.

I NAME WAS HOLDING ONE END OF A PIECE OF 34IN X60IN OF STEEL PLATE THAT WAS BEING BENT BY ANOTHER EMPLOYEE ON THE BENDING MACHINE WHEN HE FELT A PAIN ON HIS SHOULDER BLADE

SEE ATTCHD;I.NAME DRILLING,TERRAIN IS ROUGH...SMALL ROCK -FOOTBALL SIZE-TRYING TO FALL IN DRILL HOLE.STOPPED DRILL TO REMOVE THE ROCK.REACHING FOR ROCK HE HIT LEVER THAT TURNS DRILL BIT ON AND IT TURNED SMASHING LEFT FINGER ON RIGHT HAND. ..SKIN TORN FROM FINGER ,TREATED AND RELEASED W/NO BROKEN BONES.WILL PROBABLY RETURN 5-1-89 PENDING DR RELEASE

WHILE INSPECTING NEW HYDRAULIC HOSES ON BACKHOE. I,NAME OPERATING BACKHOE FROM THE GROUND BEHIND THE BACKHOE. THE BACKHOE ARM SWING AROUND AND PINCHED HIM TO BACKHOE. THE BACKHOE ARM WILL NOT TOTALLY SWING TO BACKHOE BODY INSELF.

MOVING FUEL TANK WITH CRANE USING 6IN STRAPS HOOK ON STRAPS PINCHED FINGERS BETWEEN HOOK & TANK THIS ACCIDENT WAS MISTAKENLY RECORDED UNDER OSHA & WAS FOUND DURING AN INTERNAL RECORDS AUDIT

THE HOIST CAME FREE FROM ITS SUPPORT AND SWUNG TOWARD I NAME AS HE WAS TRYINT TO HELP GUIDE THE HOIST, LEG OF THE HOIST SWUNG TOWARD HIM KNOCKING HIM OFF BALANCE. JUMPED FROM CEMENT WALL TO TH E GROUND. HURT BACK. LOOK LIKE A CRACKED VERTEBRA IN HIS LOWER BACK. ADMITTED TO THE HOSPITAL.

EMPL WAS INSIDE CAB OF A PRODUCTION HAULAGE TRUCK WHICH WAS BEING LOADED BY A SHOVEL THE TRUCK BED WAS HIT BY A BIG BOULDER JOLTING HIM INSIDE THE CAB THE BOULDER HAD HUNG UP IN THE SHOVEL DIP PER AND WHEN THE OPERATOR STARTED SWINGING BACK TO THE SHOVEL PIT THE BOULDER CAME OUT STRIKING THE BED OF THE TRUCK

EMPLOYEE WAS REMOVING A CUTTING EDGE BOLT FROM A DOZER WITH AN IMPACT WRENCH THE HEAD OF THE BOLT CAME UP & SPUN & AT THE SAME TIME THE EMPLOYEES HAND SLIPPED & THE BOLT CUT H IS HAND

EMPLOYEE WAS LOOSENING BOLGTS ON A TGAILINGS PUMP WITH 11/2 IMPACT WRENCH WORKING WITH HANDS OVER HEAD WHEN BOLT CAME LOOSE WRENCH KICKED BACK EMPLOYEE WAS TRYING TO HOLD ON TO THE WRENCH & KEEP HIS BALANCE FELT PAIN IN STOMACH DIAGNOSED AT THAT TIMEA S UMBILLICAL STRAIN BECAME A LOST-TIME INCIDENT EFFECTIVE 110388 WHEN HE WAS RE-DIAGNOSED AS HAVING A HERNIA

EMPLOYEE WAS CUTTING SAMPLES ON THE BAND SAW, REACHED UNDER TABLE FOR A TIN SAMPLE SCOOP; BLADE WAS STILL MOVING EVEN THOUGH SAW HAD BEEN TURNED OFF. NICKED HIS FINGER THROUGH HIS GLOVE.