6
registros coincidentes
Mostrando los 6
16 de febrero de 2004
CA · Metal/No metálico
Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador
MAQUINARIA
CR Briggs · Golpeado contra un objeto en movimiento
EE WAS OPERATING A DOZER ON THE LEACH PAD, PUSHING ORE INTO PLACE. HE STATED THE TRACKS OF THE DOZER SLIPPED ON ROCK WHEN HE WAS PUSHING UP A FACE OF ORE. WHEN THE DOZER SLIPPED, THE SUDDEN STOP JOLTED HIM AND RESULTED IN SEVERE BACK PAIN. HE HAS NOT RETURNED TO WORK AT THIS TIME AND WILL SEE THE DOCTOR AGAIN ON 02/19/04.
2 de abril de 2003
CA · Metal/No metálico
Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador
MAQUINARIA
CR Briggs · Golpeado contra un objeto en movimiento
EE WAS OPERATING A HAUL TRUCK THAT WAS BEING LOADED IN THE PIT. THE TRUCK WAS ROCKED BY A LARGE BOULDER & THE OPERATOR STRUCK HIS ELBOW ON THE DRIVER'S SIDE DOOR. HE CLAIMED TO HAVE SOME TINGL ING IN HIS FINGERS ALTHOUGH NO PHYSICAL INJURIES COULD BE FOUND BY THE MEDICAL FACILITY. HE WAS RELEASED FOR FULL DUTY ON APRIL 7.
3 de marzo de 2002
CA · Metal/No metálico
Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador
MAQUINARIA
CR Briggs · Golpeado contra un objeto en movimiento
EMPLOYEE WAS OPERATING A D10 DOZER PUSHING MATERIAL TO THE LOADER IN THE PIT AREA. HE WAS OBSERVED BY HIS CO-WORKING COMING OFF THE FACE AND HIT THE PIT FLOOR VERY HARD WITH THE DOZER. THE DOZ ER THEN TRAVELED APPROX 75 FT AND STOPPED. EE WAS FOUND IN THE CAB SLUMPED OVER AND BLEEDING FROM A LARGE LACERATION ON HIS FOREHEAD. REQUIRED 11 STITCHES TO CLOSE.
22 de marzo de 2001
CA · Metal/No metálico
Soldador (de taller)
MAQUINARIA
CR Briggs · Golpeado por objeto que cae
EE WAS WELDING ON A TOGGLE PLATE ON THE CRUSHER.THE PLATE IS APPROX. 3'X5'X16", WEIGHT ~1600 LB.HE SUSPENDED THE PLATE ON A 1/4" CABLE & ATTACHED HIS GROUND TO BACK TO THE CABLE. HE DID NOT FO LLOW THE STANDARD PROCEDURES WITH PROPER CABLES OR GROUNDING. THE WELDER ARCHED ACROSS & BURNT THE CABLE IN HALF. THE PLATE FELL & STRUCK HIM ONBOTH ANKLES, FRACTURING BOTH.
15 de marzo de 2000
CA · Metal/No metálico
Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado
MAQUINARIA
CR Briggs · Sobreesfuerzo, no clasificado en otra parte
EE STATED WAS HELPING TO REPLACE THE SCREENS IN THE SCALPER. HE HAD BEEN USING AN IMPACT WRENCH TO REPLACE THE NUTS. HE BROKE FOR LUNCH AND FELT SOME SPASMS INHIS MID TO LOWER BACK. HE WAS TAK EN TO THE HOSPITAL WHERE HE WAS X-RAYED SHOWING NO DAMAGE TO THE SPINE. HE WAS OFFERED MODIFIED DUTIES BUT DID NOT RETURN TO WORK THE NEXT DAY.
26 de febrero de 2000
CA · Metal/No metálico
Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo
MAQUINARIA
CR Briggs · Golpeado por... no clasificado en otra parte
EE WAS REPLACING A WEAR IRON ON THE BUCKET OF A 992 LOADER. HE WAS HOLDING THE HEAD OF A BOLT WITH HIS BEAR HAND AND USING AN IMPACT WRENCH TO LOOSEN THE BOLT. THE BOLT TURNED WITH THE IMPACT WRENCH LACERATING HIS LEFT INDEX FINGER, 6 STITCHES WERE REQUIRED TO CLOSE THE WOUND. HE DID NOT LOOSE ANY WORK TIME AS A RESULT OF THIS INCIDENT.
Mostrando los 6