Buscar en el registro

EE was bolting with jackleg and machine was over his head as he pulled machine down the air hose came off and he was struck in the right forehead above his eye. He was standing close to the drill for the whipcheck to catch the slack in the hose before it hit him.

Employee was drilling a raise round with stoper drill and had drilled all of round except for 3 holes when rock fell out of back striking him in right shin bone. he was taken to hospital and x-rayed and released back to full work status.

EMPLOYEE WAS BOLTING WITH JACKLEG DRILL AND MACHINE CAME BACK AND HIT HIM ABOVE HIS LEFT EYE CUTTING IT. EMPLOYEE FELL DOWN AND RECEIVED TWO CUTS ON TOP OF HIS HEAD.

EMPLOYEE WAS DRILLING WITH STOPER GOT ROCK IN EYE. DIDN'T KNOW IT UNTIL NEXT MORNING.

EE WAS BOLTING WITH JACKLEG WHEN MACHINE FELL FORWARD AND EE TRIED TO HOLD THE MACHINE FROM FALLING DOWN AND PULLED A GROIN MUSCLE IN DOING SO.

WHILE ROCKDUSTING WITH SPLIT SET ROCKBOLTS AT THE FACE OF THE DECLINE, A ROCK APPROX 6" BY 6" FELL FROM THE BACK, STRUCK THE JACK LEG DRILL AND RICHCETED OFF TO STRIKE EE IN THE FRONT OF H IS LEFT THIGH, CAUSING A BRUISE. THIS IS REPORTABLE ONLY BECAUSE DR GAVE HIM A PRESCRIPTION MUSCLE RELAXANT.

WHILE CLEANING SHOTCRETE POD, EE'S FINGER WAS INSIDE POD, WHEN ACCIDENTALLY TURNED AIR BACK ON, NIPPING A SMALL PIECE OF FINGER TIP.

WHILE EE WAS TIGHTENING UP A SPLIT BOLT INTO A MAT A PIECE OF LOOSE CAME DOWN ON HARD HAT, DRIVING HIS GLASSES INTO HIS NOSE AND LIP UPPER.

EMPLOYEE WAS HELPING BOLTER OPERATOR MOVE THE BOLTER. AS HE WAS CLIMBING DOWN, EMPLOYEE WAS REACHING FOR THE HANDRAIL AND INSTEAD PLACED HIS HAND ON THE CONOPY TOWER. AT THIS TIME THE OPERATOR WAS BRINGING DOWN THE CANOPY AND CAUGHT THE 1ST DIGIT OF RT. HAND, SEVERING THE TIP. REMAINS ON L, LIGHT DUTY UNTIL RELEASED BY HIS PHYSICIAN.

HE WAS STANDING ON A SCAFFOLD PLANT AND BENT OVER TO WELD A PLATE. THE HYDROSTROKE WENT FORWARD, CATCHING HIS LEG BETWEEN HANGER ROD OF HYDROSTROKE AND CHANNEL IRON.

CONDITIONS WERE RAINY. R 7 I RIGHT HAND STEERING CLUTCH AND BRAKE.

ANOTHER EE WAS WORKING ABOVE EE LOOSENING BOLTS ON CASCADE AT MILL 2. THE AIR HOSE COUPLER TO THE IMPACT GUN BROKE AT THE BASE OF THE GUN. THE LIVE AIR HOSE SWUNG DOWN AND STRUCK EE ON THE SHO ULDER AS HE WAS REPAIRING A WATER DRAIN.

EMPLOYEE WAS DRILLING SHORT HOLES SO THAT HE COULD INSTALL STEEL SET AT THE FACE AS THE EMPLOYEE WAS STARTING TO DRILL THE EMPLOYEE SSAW SOME LOOSE START TO COME DOWN THE EMPLOYEE LET GO OF TH E JACKLEG DRILL AT THIS TIME THE DRILL THEN STRUK HIM ON THE RT SIDE OF HIS BODY

EE IN THE BASKET OF ROOF BOLTER PLACING A BOLT AND MAT WHEN A SLAB FELL STRIKING THE BASKET. THE EE WAS THROWN AGAINST THE SIDE OF THE BASKET. EE WAS PUSHED AGAINST THE BASKET CAUSING PAIN ON THE LEFT SIDE OF HIS RIBCAGE.

EMPLOYEE WAS DRILLING ROCK BOLTS IN THE BACK OF SCISSOR TRUCK HE STARTED DRIVING IN BOLT & RAN OUT OF JACK LEG POST HE PULLED MACHINE OUT & COULDNT HOLD IT & SLIPPED OVER THE RAILING POST HIT HIM THE GROIN

EE WAS CUTTING A BOARD WITH A CROSS CUT SAW, THEBOARD HAD A CABLE INSIDE OF IT. THE SAW CAUGHT THE CABLE & JERKED THE BLADE OF THE SAW INTO THE EE'S UPPER THIGH, CAUSING A LARGE AVULSION.

JACK LEG FELL FROM SCIZZOR TRUCK AND HUNG UP ON VENT LINE. EMPLOYEE WAS MOVING TRUCK WITHOUT SECURING JACK LEG.

INJURED WAS DRILLING UP HOLES TO INSTALL ROOF BOLTS AND MATS. A ROCK BROKE OFF UNDER THE MAT, FELL AND STRUCK HIS FOREARM.

EMPLOYEE WAS GOING BY STOVE WHICH HAD A FIRE BURNING APPARENTLY THERE WAS GLASS IN THE STOVE & WHEN IT HEATED IT SHATTERED & MATERIAL PROPELLED THROUGH THE OPEN DOOR OF THE STOVE STRIKING THE EMPLOYEE IN THE ABDOMEN

EMPLOYEE STARTED TO DRILL A HOLE TO INSTALL A ROOF BOLT. A SLAB, APPROX. 2 1/2 FT X 3FT X 3FT, BROKE LOOSE AND STRUCK HIM.

WHILE GRINDING A PIECE OF KEY STOCK, 1/2" X 3/4" X 2 1/2", ON A BENCH GRINDER, THE GRINDING STONE KICKED OUT THE KEY STOCK AND THE KEY STOCK STRUCK EMPLOYEE'S THUMB.

EMPLOYEE WAS INSTALLING ROOF BOLTS WITH A SHORT DRIVER. THE LONG DRIVER SHOULD HAVE BEEN USED AND HE LOST CONTROL OF THE JACKLEG WHEN HE TRIED TO GET BACK ON THE BOLT. HE DIDN'T LET THE MACH INE GO ONCE HE LOST CONTROL AND THE JACKLEG FELL ON HIS LOWER ABDOMEN.

A 24 INCH PIPE WRENCH WAS BEING USED TO TIGHTEN A CONE LINER PIN. INJURED GRASPED THE WRENCH WAS BEING USED TO TIGHTEN A CONE LINER PIN. INJURED GRASPED THE WRENCH TO KEEP IT FROM FALLING ON S OMEONE JUST AS SOMEONE OUTSIDE THE MILL BEGAN TIGHTENING THE NUT WITH AN IMPACT WRENCH, THUS PINNING INJURED S FINGER BETWEEN PIPE WRENCH AND LINER.

EE WAS COLLARING A HOLE TO INSTALL A ROOF BOLT; A PIECE OF ROCK BROKE OFF AND STRUCK HIS FOOT.

EE WAS INSTALLING ROCK BOLTS FROM SCISSOR LIFT TRUCK. A SMALL SHARP ROCK FELL FROM AREA PREVIOUSLY DRILLED, HITTING HIM ACROSS FOREARM.

INJURED WAS REMOVING LINER BOLTS ON THE OUTSIDE OF THE CASCADE MILL. DURING THE PROCEDURE, DUST WAS BLOWN INTO HIS FACE BY THE IMPACT EXHAUST AIR. HE WAS NOT AWARE OF ANYTHING IN HIS EYE UNTIL SEVERAL HOURS LATER.

INJURED WAS WELDING AND CHIPPING SLAG; SMALL PIECE ENTERED HIS EYE. EMPLOYEE WAS NOT WEARING THE PROPER EYE PROTECTION.

THE INJURED PERSON WAS USING A HAND HELD GRINDER WHEN A SMALL PIECE OF METAL WAS THROWN, BY THE GRINDER, INTO HIS RIGHT EYE. THE GRINDING MACHINE WAS NEW, OUTOF THE BOX. THE PERSON INJURED W AS INSTRUCTED TO INSTALL A GUARD BEVFORE BEGINNING WORK WITH THE GRINDER. HE FAILED TODO SO, THUS CREATING A UNSAFE CONDITION THAT CAUSED THE INJURY. HE ALSO FAILED TO USE A FACE SHIELD, AS