Buscar en el registro

using air to unplug line air pressure bubbled slurry with chemicals over pipe and hit operater in eyes

Was gouging metal when hot piece entered glove and burned left hand.

Was welding and cutting, thought irritation was a flash burn, went to the clinic and found that it was a foreign object in the right eye.

Welding on D-12 drill. Was welding retaining straps to head and steel and flashed eyes before welding hood was lowered.

WORKER WAS TORQUEING THE INSIDE WHEEL NUTS ON A CAT 77 USING A 1" AIR WRENCH. THE WRENCH WAS NOT "SEATED" PROPERLY ON THE WHEEL NUT WHEN THE AIR WAS APPLIED, RESULTING IN IT TURNING & PINCHING HIS RIGHT THUMB AGAINST THE VALVE STEM GUARD. THE WORKER REQUIRED TWO STITCHES IN ORDER TO REPAIR THE CUT.

FOREMAN WAS DRILLING. REACHED UP TO TURN OFF MACHINE. RIGHT HAND WAS STRUCK BY SHARP ROCK (SOFT BALL SIZE) WHICH DISLODGED FROM ABOVE AND IMPACTED HAND RESTING ON DRILL. BARRED DOWN BEFORE DRILLING. FOREMAN WAS WEARING ALL REQUIRED SAFETY EQUIPMENT.

DURING AN EXTRICATION CLASS EMPLOYEE WAS WORKINGWITH THE JAWS OF LIFE (HYDRAULIC SPREADER) & APPARENTLY TWISTED & TURNED, STRAINING HIS BACK.

WHILE EE WAS WORKING ON HOLOFLITE SCRUBBER, HE WAS PUTTING SEPARATOR BAFFLE ADAPTER IN. EE BENT OVER CENTER WHILE PUSHNG AND LIFTING, STRAINING BACK.

WHILE USING IMPACT WRENCH, DUST BLEW 8INTO EE'S EYES. EE WAS DOING RELINE ON SAG MILL II.

WHILE TRYING TO TAPE AIRHOSE TO THE 1 1/4" DRILL PIPE THAT WAS BEING LOWERED INTO THE DRILL HOLE, THE WIRE CABLE JUMPED TRACK AND SLIPPED FROM THE HIGH SIDE OF THE DRUM TO THE LOW SIDE. THIS C AUSED THE PIPE AND THE AIRHOSE TO DROP ABOUT A FOOT PULLING EE'S HAND DOWN AND PINCHING IT IN THE DRILL TABLE.

WHILE GRINDING, A SLIVER OF STEEL GOT IN THE EYE

THE EE STATED THAT HE WAS PUSHING FROST CHUNKS WITH A DOZER WHEN IT SLID SIDEWAYS OFF OF A FROST CHUNK FALLING APPROX. 2 FEET. THE EE STATED THAT THE JAR OF THE FALL CAUSED PAIN IN THE EE S LO WER BACK. EE MISSED FIRST SCHEDULED WORK DAY 12-17-97.

THE EMPLOYEE STATED THAT HE WAS USING A DIE GRINDER TO CUT THE BED OF A MAINTENANCE TRUCK. THE EMPLOYEE STATED THAT HE WAS WEARING HIS SAFETY GLASSES PLUS A FACE SHIELD WHEN HE WAS CUTTING TH E BED AND NEVER NOTICED ANYTHING IN HIS EYE UNTIL THE NEXT MORNING WHEN HE AWOKE.

THE EMPLOYEE STATED THAT HE WAS USING A GRINDER TO PUT A SHARP POINT ON A PIECE OF ROUND STOCK. THE ROD SLIPPED OFF THE END OF THE GRINDING WHEEL AND HIS HAND CAME IN CONTACT WITH THE WHEEL. T HE EMPLOYEE RECEIVED STITCHES IN THE TOP OF HIS LEFT HAND.

THE EMPLOYEE STATED THAT HE WAS WELDING A LIP ON THE BOTTOM OF A DIPPER DOOR WHEN HE RECEIVED FLASH BURNS TO BOTH EYES. IT WAS THAT EVENING AT HOME THAT HE NOTICED THE PAIN IN HIS EYES.

EMPLOYEE STATED THAT HE WAS RUNNING A JACK HAMMER TO LOOSEN LINERS ON BALL MILL NO. 1 WHEN THE JACK HAMMER SLIPPED CAUSING HIM TO ARCH HIS BACKAT A BAD ANGLE. THE EMPLOYEE STATED THAT HE COMPENSATE FOR HIS SORE SHOULDER. THIS INJURY COULD POSSIBLY BE RELATED TO A PRIOR INJURY RECEIVED OFF OF THE JOB.

EE STATED THAT HE WAS WORKING ON A 170 WABCO HAUL TRUCK FRAME WITH AN AIR JACK. EE STATED THAT HE WAS LIFTING THE FRONT FRAME WITH A AIR JACK WHEN SOME METAL FROM THE AIR JACK EXHAUST IMBEDDED INTO HIS RT EYE.

EMPLOYEE WAS TREATED AT A LOCAL MEDICAL CLINIC TO HAVE SOME [?] DIRT REMOVED FROM HIS LEFT EYE. THE EMPLOYEE HAD BEEN USING A JACK HAMMER THE DAY BEFORE IN A MILL LINER CHANGE JOB.

EE WAS CUTTING OUT BALL CHIPS DURING A SAG MILL RELINE JOB. WHILE CHIPPING THE SLAG A PIECE FLEW OFF STRIKING HIM IN THE RIGHT EYE. THE EE WAS TREATED AT A LOCAL CLINC FOR A SCRATCH TO THE EYE . THE EE WAS ISSUED 2 PRESCRIPTION OINTMENT AND RELEASE BACK TO WORK THE FOLLOWING DAY THE EE WAS WEARING THE PROPERY PROTECTIVE EQUIPMENT.