Buscar en el registro

WHILE USING A CHAIN HOIST TO LIFT A CELL SHAFT THE HOIST CONTROLS MALFUNCTIONED MAKING IT IMPOSSIBLE TO STOP THE HOIST. WHEN THE HOIST WOULD NOT STOP THE LOAD BROKE THE LIFTING STRAP, CAUSING EE WHO WAS GUIDING THE SHAFT TO FALL. THE EEE INJURED HIS LOWER BACK IN THE FALL.

WHILE WELDING A PIECE OF STAINLESS STEEL PIPE OVERHEAD, A PIECE OF SLAG POPPED OFF AND STRUCK TO THE EE'S NECK CAUSING A MINOR BURN. THE AREA WAS CLEANED AND TREATED WITH ANTISEPTIC BUT LATER BECAME INFECTED AND REQUIRED MEDICAL TREATMENT. THE EE WAS WEARING A WELDING HELMET/JACKET AT THE TIME.

EMPLOYEE WAS CUTTING AN EXISTING PIECE OF 3/4 CONDUIT, HOLDING BANDSAW WITH ONE HAND AND CONDUIT WITH THE OTHER. WHEN CONDUIT WAS UT IN HALF BANDSAW CAME DOWN ON FINGER AND CUT AT KNUCKLE.

WHILE CLEANING AROUND A PULVERIZER, THE PULVERIZER WAS INADVERTANTLY ENERGIZED. THE SURPRISED TECHNICIAN PULLED HIS HAND AWAY REACTIVELY, CUTTING HIS RIGHT HAND ON THE MOVING BLADES.

THE EE WAS DRILLING HOLES IN SHEET METAL WHEN THE METAL SLIPPED CUTTING THE MIDDLE FINGER ON HISRIGHT HAND. THE EE DID NOT SEEK MED TREATMENT UNTIL 9/9 BY THAT TIME THE WOUND WAS INFECTED, MAK ING IT A REPORTABLE INCIDENT.NOTE 3S4 WAS NOT NOTIFIED UNTIL 9/24/98

GRINDING & METAL PARTICLES BLEW BEHIND SHIELD AND EMBEDDED IN LEFT EYE.

REMOVING DISCHARGE LINE FROM FILTRATE PUMP. WHENPIPE WAS REMOVED VACUUM BEGAN TO TURN PUMP BACKWARDS AT A HIGH RATE OF SPEED. SHEAVE CAME APART,WENT THROUGH BELT GUARD HITTING EMPLOYEE IN LOWE R LEFT LEG.

COPLER OLDING PLATE LACERATION INDEX FINGER.

WELDING MANOMETER FITTING ON SPRAY DRYER DUST COLLECTOR AND GOT A PIECE OF TRASH IN RIGHT EYE.

EE WAS APPLYING STRIKER TO CADWELD MOLD TO WELD WIRE TO COPPER ROD. WHEN SHOT, TOOK BURNING FLASH, CONTACTED HAND. 2ND DEGREE BURN TO RIGHT HAND BETWEEN THUMB AND FOREFINGER.

WAS USING FLOOR SWEEPER TO CLEAN FLOOR IN WAREHOUSE AND RIGHT THIGH WAS HIT BY PALLET CAUSING SPLINTERS TO GO INTO THIGH.

WELDING ANND A PIECE OF METAL GOT INTO EYE.

WENT OUTSIDE OZONE BUILDING TO CHECK PRODUCT PUMP.PRODUCT SUMP WAS RUNNING OVER AND THE FUMES FROM THE OZONE PRODUCT TOOK EMPLOYEES BREATH AWAY.

EE WAS STANDING ON A LADDER DRILLING OVER HIS HEAD. THE DRILL BIT GOT HUNG UP ON HIS RIGHT ARM TWISTED WHILE HE WAS TRYING TO KEEP CONTROL FO THE DRILL. WHEN EE CAME TO THE SHOP AT 4PM, HE SA ID HIS WRIST WAS SORE. ONE OF THE OWNERS OFFERED TO TAKE EE TO THE DR, AND EE SAID HE THOUGH T IT WOULD BE ALRIGHT.

WHILE BLOWING OUT FROM UNDER BAGGER WITH ANOTHER EE AND TRASH BLEW IN EYES.

STARTED TO PUMP M-13, OPENED TANK VALVE WENT UNDER HILL OPENED VALVED 13 BETWEEN 3-9 COUPLING BLEW OF LINE BLOWING SLIP IN EYES.

AMMONIA ROTOMETER BUSTED AND OPERATOR TRIED TO CUT FEED VALVE OFF AND WAS OVERCOME BY FUMES.

REMOVING BOWL FROM PULVERIZER, BLADES HAD NOT STOPPED. BOLW SLIPPED OUT OF HAND & REFLEX MADE HIM GRAB TO CATCH BOWL & FINGERS GOT IN THE BLADES.

REPLACING TOP ON STEAM TANK GRINDING ROUGH AREAS DOWN & CUT FINGER ON A PIECE OF ROUGH STEEL NOT YET GRINDED DOWN.

WHILE GRINDING ON BIRD SCROLL, A PIECE OF METAL GOT IN EYE.

SOMETHING ENTERED EMPLOYEE'S RIGHT EYE WHILE WORKING AT BACK DOOR OF SHOP.HE HAD SAFETY GLASSES WITH SIDE SHIELDS ON.THERE WERE OTHER WORKERS GRINDING AND DRILLING IN THE SHOP AREA AT TIME OF ACCIDENT.HE WASHED THE EYE OUT AND HAD NO PROBLEMS UNTIL 04-05-93.WAS SENT TO DOCTOR WHO REMOVED A FOREIGN OBJECT FROM RIGHT EYE.

WELDING MAT FOREIGH BODY REMOVED

WELDING MATERIAL AND RECEIVED BURN TO EYE.

EMPLOYEE WAS INSTALLING BACKWASH SPRAYER BAR, THE BAR CAME INTO CONTACT WITH ROTATING ROTARY SCREENS & FORCED BAR OUT OF HOLE & HIT EMPL ON THE FOREHEAD.

WELDING MAT BURN EYE.

71329NG PULLER BROKE AND CUT EMPLOYEE'S LEFT HAND/MIDDLE FINGER. EMPLOYEE RECEIVED 6 STICHES IN HAND.

EMPLOYEE CUT HIS HAND ON A DOCTOR BLADE IN THE DIAMOND INTERNATIONAL PRESS.

65349NG BURN TO EYE.

WELDING MATERIAL, CORNEAL BURN.

EE WAS CUTTING BLADES OFF BLUNGER WITH TORCH AND HOT METAL POPPED INTO MOUTH AND BURNT A HOLE IN HIS TOOTH.

WELDING MATERIALS & BURNED (R) EAR

WELDING MATERIALS AND REVEICED BURNS TO EYES.

HE WAS CUTTING A PIECE OF SHEETING & CUT ARM.

PUNCHING HOLES IN SHORT PC OF FLAT STEEL STRIPS PUNCH HUNG IN METAL AS HE WAS PUNCHING HOLES SNATCHED L HAND IN PC OF METAL MASHING AND TEARING L INDEX FINGER 1ST JOINT

WELDING ON SWECO SCREEN PART AND WHEN HE GOT THROUGH, FLIPPED UP HOOD AND SLAG POPPED IN RIGHT EYE.

EMPLOYEE WAS GRINDING WITH HIGH SPPED STRIGHT END GRINDER ON A PIECE OF 2" TUBING WHIHC INJURED WAS HOLDING. THE GRINDER WHEEL BROKE OFF AND THE PART THAT WAS LEFT ON THE GRINDER PENETRATED T HE INJURED'S LEFT HAND BELOW LITTLE FINGER ON SIDE OF JOIN CAPSULE.

RUNNING A HOLE PUNCH & PUNCH EXPLODED & PIECE OF STEEL GOT IN HAND

DRILLING HOLE IN STEEL PULLED ARM

WELDING FB IN R EYE

EE WAS WELDING INSIDE OPEN TOP CONTAINER TANK HAD BEEN SPRAYED WITH NOZZLE SHIELD AND ANTI SPATTER SPRAY SPATTER SPRAY CONTAINS 1,1,1, TRICHLORETHARP SPRAYING TANKS WITH ANTI SPATTER HAS BEEN COMMON PRACTICE.

WHILE EMPLOYEE WS USING LEVER TOT IGHTEN MIXER TO STAND, THE LEVER BROKE, CAUSING EMPLOYEES HAND AND WRIST TO STRIKE STAND AND CONCRETE SLAB.

EMPLOYWW ENTERED BLEACH ROOM THROUGH REAR DOOR, NOT KNOWING THAT THERE WAS AN ACID LEAK IN ACID LINE, ACID WAS SPRAYED INTO HIS LEFT EYE.

EMPLOYEE WAS WELDING STAINLESS PIPE, LIFTED HELMET AND WELDING SLAG POPPED OFF OF PIPE INTO LEFT EYE.

I.NAME OPERATING DOZER,LEG WAS FORCED TO HIT BRAKE LOCK LEVER.

EMPL WALKING BY IL TANK,I.NAME BLEW OIL LINE OUT WITH AIR.PRESSURE CAUSED OIL LINE TO COME OUT OF TANK AND SPRAYED IN EYES OF I.NAME.

WELDING ON A PIECE OF PIPE BURNED EYES.

EMPL LOWER POT ON BOTTOM OF LAB SNADGRINDER WHICH HAD BUILT UP PRESSURE AT OR ABOVE BOILING POINT OF WATER.CLAY SLURRY AND SAND SPRAYED OUT ONTO EMPL ARMS AND CHEST.

WHILE EMPL WAS CATHCING BAGS ONE CAME DOWN SLIDE AND HIT R INDEX FINGER CAUSING IT TO BE JAMMED ACCIDENT WAS NOT REPORTED TO ME UNTIL 3-3-89 NOTIFIED MSHA OFF OF LATE REPORT 10:20 AM ON 3-9-89

QUICK PLUG CAME OUT OF DRILL ROD CUAISNG DRILL O ROD TO FALL A(D HIT INJ IN LOWER BACK.

HE WAA.S CUTTING WITH CUTTING TORCH, THE HOSE WAS WRAPPED AROUND A PIECE OF METAL AND HE EITHER PICKED UP THE HOSE OR STEPPED ON IT CAUSING THE TORCH TO PULL OUT OF HIS HAND AND TORCH WENT ACR OSS HIS ARM.