Buscar en el registro

EE WAS POKING SAND IN THE SAND BIN WHEN LANCE BECAME STUCK IN THE SAND. EE FLET PAIN IN HIS LOWER BACK.

WHILE WELDING CLIPS ON KILN 6 FEED-END, SOME DUST FELL INTO EE'S LEFT EYE.

EMPLOYEE WAS OPERATING THE VACUUM HOSE OF THE GUZZLER WHEN THE HANDLE KNOCKED SOME CLINKER DUST DOWN. LATER THE EYE BECAME IRRITATED.

BOTH HANDS AND FOREFINGERS THROBBING UNABLE TO GRASP OBJECTS. EE ALSO STATED THAT TWO DAYS OF SOW SHOVELING AT HOME DIDN'T HELP.

WHILE USING THHE GUZZLER (VACUUM TRUCK), EE WAS CLEANING UP #4 COOLER PIT. THEHCOOLER HAD CEMENT DUST AND HARD CEMENT BUILD UP. THE SEVEN PERSON CREW WAS CLEANING UP THE AREA. EE ADN EE WERE USING A 6" VACUUM LINE AND RUNNING THE TRUCK WHEN SOME CHUNKS PLUGGED UP THE HOLE OF THE HOSE. EE REACHED INTO PULL THE CHUNKS OUT AND WHEN EE RELEASED THE CHUNK, THE VACUUM SUCKED IN EE'S A

WHILE LANCING ON THE 2ND FLOOR OF THE PREHEATER EE TURNED HIS BACK WHEN THE PORT HOLE TURNED POSITIVE. DUST BLEW INTO EE'S EYE. EE DID HAVE GLASSES & A FACE SHIELD, HOWERVER, EE SHOULD HAV E WORN THE HELMET TO PROTECT HIS HEAD & NECK

WHILE JACK HAMMERING DUST FLEW INTO EE'S EYE

EE WAS LANCING THE 2ND FLOOR OF THE PREHEATER WHEN THE AIR BLASTER WENT OFF. THE AIR BLASTER BLEW MATERIAL OUT THE PORT HOLE. THE MATERIAL HIT EE'S RIGHT SIDE OF HIS FACE AND EYE.

EE WAS USING VACUUM TRUCK, WHEN HE GOT ALKALI DUST IN HIS EYES.

THE TD25 DRESSER DOZER RECIEVED STIFF NECK LOSS CERVICAL KYPHOSIS.

EE OPENED THE DOOR ON SECOND FLOOR OF PREHEATER TO CHECK FO MATERIAL BUILDUP. HOT MATERIAL BLEW OUT OF DOOR AND INTO LEFT EAR WHICH INFLAMED THE EAR.

WHILE EMPLOYEE WAS JACKHAMMERING THE PREHEATER WALLS THE HAMMER BIT STUCK. EMPLOYEE PULLED BACK AND LOST HIS BALANCE WHEN IT CAME LOOSE. HE FELL BACKWARDS AND CAUGHT HIS HAMMER BETWEEN JACKHAM MER AND FLOOR. THE TRIGGER WAS TAPED IN THE ON POSITION SO JACKHAMMER KEPT HITTING HAND AGAINST THE FLOOR.

EMPLOYEE WAS RUNNING A WEED EATER & HOLDING FINGER IN ONE POSITION TOO LONG

EMPLOYEE WAS JACKHAMMERING HARD CLINKER WHILE SITTING & LAYING DOWN AS WELL AS STANDING INFLAMMED TISSUE IN RIHT FOREARM

AFTER LONG PERIODS OF LANCING AND JACKHAMMERING IN THE PREHEATER TOWER, LARGE CHUNKS OF BUILDUP FELL JACKING EMPLOYEE'S ARM UP.

EMPLOYEE WAS JACK HAMMERING HARDENED CEMENT OFF THE FLOORS OF T ETUNNEL TO CLEAN IT OUT AND SOME DUST GOT INTO HIS EYES.

EE WAS AIR ARCHING OUT OF 5 FINISH MILL. A SMALL PARTICLE OF METAL CAME UP UNDER THE HOOD AND STUCK HIM IN THE CORNEA OF THE RIGHT EYE.

HE WAS USING THE SUPERSUCKER TO CLEAN OFF DUST SCREW. HE WAS ON A CATWALK 14 FT ABOVE FLOOR. HE TRIED TO MOVE THE HOSE BY SWINGING IT OVER A FAN COVER AND IT PUSHED BACK AGAINST HIM YANKING HI M THROUGH AN OPENING IN THE CATWALK. A PIECE OF THE CATWALK GRATE HAD BEEN REMOVED. HE WAS AWARE OF THIS OPENING BUT THE WEIGHT AND FORCE OF THE SUPERSUCKER PUSHING AGAINST HIM CAUSED HIM TO

CUTTING J HOOKS OUT OF SCREEN IN SCREEN BUILDING WITH A TORCH. HAND SLIPPED WHILE CUTTING AND HERECEIVED A BURN TO LEFT ARM.

WHILE EMPLOYEE WAS LOADING ASHES, THE MIXER RAN OUT OF DUST, IT TURNED TO WATER ADN THEMUD SPLASHED UP INTO HIS EYES.

EE WAS LFITING THE BOWL FROM THE ANSTOM MILL WHEN SHE FELT A POP IN RIGHT ELBOW.

EMPLOYEE HAD BEEN USING A JACK HAMMER IN THE WET KILNS.

EMPLOYEE WAS LANCING ON PREHEATER 3RD FLOOR WHEN HIS HAND SLIPPED ON THE BAR & FINGER STRUCK SIDE OF PORTHOLE EMPLOYEE HAD PREVIOUSLY TAKEN HIS GLOVE OFF

EMPLOYEE WAS GRINDING WELD WHEN SLAG OR OTHER MATERIAL CAME UNDER FACE SHIELD AND HIT RIGHT EYE.

EMPLOYEE WAS DEBURRING A SOFT 1/4 INCH ROD ON A BENCH GRINDER WHEN IT BECAME PINCHED BETWEENT EH WHEEL AND TOOL REST.

EMPLOYEE WAS USING A JACK HAMMER TO CLEAN OUT A BUILDUP IN THE NEW CLINKER SHED WHEN HAMMER BROKE THROUGH CRUST AND LEFT AHND WAS CAUGHT BETWEEN HANDLE AND ELECTRICAL BOX.

EMPLOYEE AND FOREMAN WERE CHECKING A SPEED CENSOR IN THE DRILL PRESS IN THE ELECTRICAL SHOP.WHEN GEAR CAME OUT OF DRILL AND HIT INJURED ON THE BACK ON HIS FIRST TWO FINGERS.

SAWING BUSHING BLADE CAUGHT RAG PULLED FINGER IN GUIDE

EMPL WAS PUTTING LANCING CAP BACK ON PREHEATER PORT WHEN PREHEATER WENT POSITIVE & CAP SLIPPED OFF.

EMPL CLEANING CEMENT FROM SPIRAL CHAIN PADS PRIOR TO WELDING THEM TO SIDE OF KILN,PIECE FLEW OFF INTO EYE.MEDICATION TO PREVENT EYE INFECTION.

EMPLOYEE HAS BEEN USING IMPACT WRENCH TO TIGHTEN RAW MILL BOLTS TO ALIGN SHAFT. NOTE: INSTALLING INSULATING MATERIAL ON HANDLE AND INVESTIGATING.

EMPL HAS BEEN HOLDING HEAD A CERTAIN ANGLE TO WORK ROCK BREAKER.

EMPLOYEE WAS WELDING ON #SFM SHELL WITH ANOTHER MAINTENANCE PERSON WHEN EMPLOYEE STEPPED BACK TO LET OTHER EMPLOYEE PIEM THE WELD WITH AN AIR GUN, THE HOSE UNSCREWED FROM THE GUN AND FLEW INTO HIS FOOT.

JACK HAMMERING IN CLINKER TUNNEL

GOING FROM WORK TO TIME CLOCK PC OF METAL FLEW OFF GRINDER OFF STRUCK HIM IN EYE

EMPLOYEE WAS SAWING A SMALL PIECE OF MATERIAL WITH THE BAND SAW WHEN THE PEICE TURNED AND PULLED HIS HAND INTO THE BLADE.

EMPLOYEE REPORTS THAT HE DID HIS NORMAL CRANE SHIFT AND AT ONE POINT IN TIME, HE FELT A PAIN IN THE LOW BACK AND LEFT LEG WHILE SITTING IN THE CAB.

USING LG WRENCH IMPACT WRENCH TO WORK ON MILL CLUTCH

EMPLOYEE WAS WORKING ON #4 KILN BRICK CREW AND WAS USING A SMALL AIR TOOL TO PACK PLASTIC.,

EMPLOYEE REPORTS THAT OVER A PERIOD OF TWO MONTHS HE HAS BEEN HOLDING HIS HEAD A CERTAIN ANGLE TO WORK ROCK BREAKER. NOTE: EMPLOYEE FILED REPORT 8/30/89.

EMPLOYEE WAS IN #6 KILN COOLER CUTTING METAL WITH A TORCH WHEN HIS FEET SLIPPED ON THE CASTABLE IN THE FLOOR OF THE COOLER & WHEN HE TRIED TO CATCH HIMSELF HIS LEFT HAND PASSED IN FRONT OF THE TORCH

EMPLOYEE WAS INSTALLING NEW BELT ON COAL CONVEYOR CMS & WAS IN THE PROCESS OF TAKING THE TENSION OFF THE TAKEUP WHEN IT MENENTARILY CAUGHT IN A BIND. THIS CAUSED THE HEADACHE BALL ON THE CRANE TO SWING FREE AND COME INTO CONTACT WITH EMPLOYEE. THE EMPLOYEE MOVEMENT WAS RESTRICTED BY HIS SAFETY BELT AND CONVEYOR STRUCTURE.

EMPLOYEE WAS DR3LLING A HOLE IN METAL PANEL AT THE WATER POND DRILL CAUGHT IN HOLE AND SPUN IN HISHAND

EMPLOYEE STATES3THAT HE IS AN ACTIVE FOREMAN & CLEANS VIBRATING FEEDERS & JACKHAMMERS & WORKS ALONGSIDE HIS EMPLOYEES A GREAT DEAL WHEN THERE IS WORK TO BE DONE USES WRENCHES ETC

EMPLOYEE WAS US3NG A PORTABLE DRILL TO DRILL A HOLE IN AN ENGINE.

EMPLOYEE WAS GE7TING A CEMENT SAMPLE FROM #7 FINISH MILL WHEN SAMPLERT PORT WENT POSITIVE & BLEW BACK CEMENT ON EMPLOYEE

EMPLOYEE WAS IN3COMPRESSOR ROOM CUTTING IRON WITH A TORCH WHEN THE END OF THE ANGLE IRON WAS CUT IT FELL AND HIT HIS LEFT ARM

EMPLOYEE WAS AT3METAL SAW TO SAW MATERIAL WHEN A PIECE OF ANGLE IRON LEFT THERE BY SOMEONE ELSE FELL ON HIM

EMPLOYEE WAS HE5PING ANOTHER EMPLOYEE TO INSTALL AND TEST THE CEMENT SAMPLING SCREW ON 7 FM WHEN HE PUT HIS HAND ON THE MOVING CHAIN.

EMPLOYEE WAS LA3CING PREHEATER TOWER ON #6 KILN WHEN DUST OR SUIT CAUSED THE NECK TO REDDEN.