Buscar en el registro

Employee was holding the liner for the hopper in place and slipped, causing their left palm to make contact with the drill bit that was coming through the hopper and liner, creating bolt holes.

Employee was using a grinder to do a repair at our Wash Plant. While grinding a object got in EE's left eye. EE treated self using eye wash. The eye continued to bother EE the next day so EE reported the incident and was seen at a MedCenter clinic. EE was given eye drops as a precaution against infection. EE returned to full duties with no restrictions.

Employee was grinding 2" pipe when a metal flake entered left eye. EE immediately notified supervisor and flushed it with eye wash. EE was taken in for medical attention. The piece of metal had to be removed. EE was wearing safety glasses and a straight clear face shield. We will be changing over to a V90 shield with built in goggles to prevent this from re-occurring.

Employee was using a cordless impact wrench with left hand. EE was tightening bolts on a motor when EE started to feel some pain in the left hand.

On 10/18/2018 the employee was grinding angle iron when EE felt something in EE's right eye. EE continued working and it wasn't until 10/23/2018 when discomfort lead EE to seek medical attention. EE had a small flake of metal in EE's right eye that had to be removed. EE was wearing safety glasses at the time of the incident.

Employee was grinding in the Welders Yard when ee got debris in left eye. EE immediately went over and flushed it out at the eye wash station. EE was wearing Safety Glasses and Face Shield at the time. EE started to feel some irritation approximately 8 working days later when ee notified employer on 5/16/2017. No work missed. First Aid with Prescription eye drops.

Suffered minor arc flash burns to both eyes while welding inside a metal bucket attached to a front end loader. The injured said he should not have raised his welding helmet while another welder was working in the same area of a shiny reflective surface. The burns were not realized until the following morning. The other welder did not suffer any arc flash burns to his eyes.

While grinding metal, the operator noticed some irritation in his right eye around 4PM. He went home end of shift at 5PM and applied eye drops. Did not help. Employee went to ER early morning of 3/8/11.

Employee was grinding and a piece of metal flew into his right eye.

Raising a flat plate of steel with a winch, it caught on an angle and swung into a ladder, caught left hand.

Ee was placing bag on the filling tube. He put his hand too far. Clamp came down on his finger.

Ee was placing bag on the filling tube. He put his hand too far. Clamp came down on his finger.

EE WAS ADJUSTING THE BAGGING MACHINE FOR 50# BAGS & HE FORGOT TO TURN THE AIR TO THE MACHINE OFF.

EMPLOYEE WAS REMOVING A STEEL PLATE FROM A SHAKER SCREEN AT THE ROCK PLANT USING A CUTTING TORCH. WHEN CUT THROUGH, THE PLATE FELL, MASHING, & BREAKING THE TIP OF THE MIDDLE FINGER OF HIS LEFT HAND.

EMPLOYEE WAS USING WRENCHES AND AIR RATCHET AND TWISTED BACK.

54736YEE WAS DOING REGULAR JOB AND EXPEREINCED PAIN IN CHEST AND RIGHT ARM. LOST 4 DAYS OF WORK. WAS RELEASED TO RETURN TO WORK 8/24/92 WITHOUT RESTRICTIONS.

GRINDING INTERRIDGE FROM BRAKE DRUM OFF TRUCK PC OF SLAG ENTER L EYE

EMPLOYEE STATES THAT HE WAS WELDING AND THE WIND BLEW HIS MASK OFF.HE STATES THAT HE CONTINUED WELDING WITHOUT MASK AND RECEIVED BURNS TO BOTH EYES.HE WAS TREATED AT PLESANT VALLEY HOSPITAL,GI VEN MEDICATION TO EYES,ALSO A PATCH FOR LEFT EYEAND WAS TOLD NO DRIVING AND MODIFIED WORK AND NO WELDING FOR ONE DAY.

EMPLOYEE WAS DIGGING A TRENCH WITH JACK HAMMER & S TRAINED BACK

EMPLOYEE WAS BAGGING SAND.

USING IMPACT GUN TO TIGHTEN BOLTS PULLED BACK

EMPL PUTTING IN LOCK PINS IN CRUSHER,ROCK FLEW UP AND HIT HIM IN NOSE.

WHILE EMPLOYEE WAS WELDING HE EXPERIENCED A FLASH BURN TO HIS EYE. EMPLOYEE SAID HE WAS WEARING A WELDING HELMET AT TIME OF INJURY.

WATCHING ANOTHER WELDER WELDING AND WAS NOT WEARING GLASSES AND HE GOT A FLASH BURN TO BOTH EYES.

USING AIR GRINDING WHEEL.

WELDING IN A SAND SCREW.