Buscar en el registro

Miners finger was caught in a belt being tested on an air compressor.

While packing cement the employee was not aware the cement bag was not in the #2 cradle properly as it filled. The bag pushed EE's right foot under the #1 cradle, cutting the top of EE's right foot. Right foot required 6 sutures.

EE was cutting a piece of metal on metal shear. EE was lining up piece to be cut when ee pushed down on pedal causing plunger to engage and drop down. When ee plunger dropped down left pinky finger was under plunger, smashing finger on tip and pulling off nail and breaking bone at tip. EE had fingertip skin sewn up and no lost time was involved.

Employee was preparing to use a hand wood router, setting the depth of the router bit to the wood. Employee turned on the router, holding the wood down with his hand; the wood slipped pulling his left index finger into the router bit, resulting in cutting his finger and severing the top tendon.

Employee was beginning to waterblast the #5 T/A duct, when hot clinker sand blew out the port hole. The hot sand blew up the sleeve of his aluminized coat causing 2nd degree burns to his right wrist and forearm.

Cleaning brick saw and nicked his left pinkie finger. Washed out at first aid station. Then driven to chanute memorial hospital to assure no infection and had 4 stitches, then he went back to work with no loss of time.

EMPLOYEE WAS CLEANING WITH THE VACUUM SYSTEM AND LIFTING LARGE HOSE CAUSED PAIN IN SIDE.

Cotter pin that holds socket in place caught employee's glove which extended the pin. This pin cut employee's left index finger. Finger received 6 stitches.

EMPLOYEE WAS TIGHTENING BOLTS ON THE DUCKWORK WITH AIR IMPACT WHEN SAFETY PIN WHICH HOLDS THE SOCKET SLIPPED OUT WHILE SPINNING. EMPLOYEE RECEIVED 14 STITCHES.

ERECTING NEW DUCT IN PLACE BY CRANE. THE DUCT WAS HUNG UP BETWEEN STEEL & WHEN IT CAME FREE, THE EE'S LEG GOT CAUGHT BETWEEN STEEL & CRANE CABLE. TAKEN TO DOCTOR. RETURNED TO JOB & WAS PLACED ON OFFICE DUTY FOR OBSERVATION. OBSERV. PERIOD WAS NOT COMPLETED: EE WAS INCARCERATED FOR UNRELATED ACTIVITY. POST-INJURY DRUG TEST: RESULTS POSITIVE.

EE WAS INSPECTING TRUNION WATER CIRCULATION SYSTEM ON #5 KILN TRUNION. WATER BLEW OUT WHILE HOSE WAS DISCONNECTED CAUSING HOT WATER BURNS TOL. FOREARM AND KNEE

EE WAS CLEANING UNDER MILL USING A HAMMER DRILL BROOM & SHOVEL. HE HIT HIS HAND ON WALL WHILE CHIPPING CONCRETE

EE WAS GRINDING WHEN HE FELT SOMETHING IN HIS EYE

EE CUT HAND.

EMPLOYEE WAS WALKING THROUGH AN AREA WHERE A FELLOW WORKER WAS GRINDING ANGLE IRON. A SLIVER OF METAL BECAME LODGED IN HIS EYE.

EMPLOYEE STATED HE WAS TURNING CHUCK KEY ON THE MAY DRILL WHEN HE ACCIDENTLY HIT THE DRILL WITH THE KNEE/ LEG. THIS ACTIVATED THE DRILL, CAUSING ARM TO TWIST AND CATCHING HIS GLOVE IN THE CHUC K KEY CHAIN. EMPLOYEE HAD NOT UNPLUGGED EQUIPMENT BEFORE REPLACING DRILL BIT.

WORKER WAS AIR LANCING FROM STAGE #4 CONE ON PREHEATER #5 PLATFORM, WHEN AN AIR PURGE CAUSED HOT DIRT MATERIAL TO BLOW OUT THE OPEN DOOR. THIS CAUSED BURNS TO BOTH FOREARMS AND THE FACE.

EE WAS WORKING ON A PREHEATER PLUG UP.L HE HAD REMOVED A CLEAN OUT PORT COVER, THEN TURNED AROUND TO TALK TO HIS SUPERVISOR. PART OF THE PLUG UP BROKE LOOSE, BLOWING HOT DIRT OUT ON THE LEFT S IDE OF THE NECK AREA AND INTO HIS GLOVE, CAUSING2ND DEGREE BURNS ON HIS NECK AND WRIST.

EE WAS HIGH PRESSURE WATER BLASTING ON THE 2ND FLOOR OF THE #5 PREHEATER. WHEN HE PULLED THE BLASTING WAND OUT OF THE PREHEATER PORT HOLE, HIS FINGER SQUEEZED THE TRIGGER & THE WAND FLIPPED U P HITTING HIS FACE SHIELD. THE IMPACT WAS HARD ENOUGH TO PUSH HIS SAFETY GLASSES HARD AGAINST HIS EYEBROW AREA, CUTTING THE SKIN

EE WAS USING AN AIR LANCE ON 4 PREHEATER. A CHUNK FELL DOWN INSIDE, CAUSING MATERIAL TO BE BLOWN OUT THROUGH A PORT HOLE INTO BOTH EYES. EE WAS WEARING SAFETY GLASSES.

EMPLOYEE WAS USING SKIP HOPPER TO HOIST SCRAP MEATERIAL FROM 7TH FLOOR OF PREHEATER, WHEN CRANE STARTED TO PICK UP HOPPER IT SLID AND CAUGHT EMPLOYEE FOOT IN PINCH POINT BETWEEN HOPPPER AND BLOCK WALL AND BRUISED FOOT.

SAWING A BRICK AND GOT A SPLINTER IN FINGER FROMDIAMOND BLADE.

EE WAS REMOVING THERMOCOUPLE FROM PREHEATER, AIR CANNON DISCHARGED & BLEW HOT RAW DUST ONTO FACE & INTO BOTH EYES, SCRATCHED EYES. EE DID NOT LOCKOUT AIR CANNON.

EE WAS GRINDING FAN HOUSING, GRONDER SLIPPED AND CUT KNUCKLE OF SECOND FINGER LEFT HAND.

NO TREATMENT OTHER THAN DIAGNOSTIC RECEIVED FOR THIS INJURY UNTIL 12-4-97. EE WAS WORKING ON POPPIT VALVE OF DUST COLLECTOR WHICH CYCLED ON TO HIS LEFT HAND COMPRESSING LIGAMENT ON A NERVE. HE DID NOT TURN AIR OFF OR BLOCK POPPIT VALVE.

EMPLOYEE WAS WELDING FLANGES ON PUMP FROM AWKWARD POSITION & STRAINED LOWER BACK (CHIROPRACTOR)

EMPLOYEE WAS USING JACKHAMMER TO LOOSEN MATERIAL ON FLOOR. HE LOST CONTROL OF JACKHAMMER AND IT FELL ON HIS BIG TOE BEHIND THE STEEL TOE OF HIS WORK BOOT.

EE WAS CLEANING PARTITION OF FINISH MILL WITH CHIPPING HAMMER WHEN PARTICLE OF CEMENT GOT INTO EYE.

EE HURT SHOULDER WHILE USING A CHIPPING HAMMER.

EE GOT SMALL PIECE OF METAL INTO LEFT EYE WHILE USING A GRINDER ON WELDS, HE BELIEVES BUT NOT SURE.

EMPLOYEE WAS USING WATER BLASTER TO REMOVE HOT MATERIAL A PIECE OF HOT MATERIAL GOT INTO HIS GLOVE HETOOK HND OFF TRIGGER OF WATER BLASTER TO SHAKE MATERIAL OUT OF GLOVE THE TRIGGER DID NOT SH UT OFF & HIGH PRESSURE WATER CUT HIS LEG

EMPLOYEE WAS WELDING WITH ANOTHER WELDER AND GOT A FLASH BURN IN RIGHT EYE.

EMPLOYEE WAS DRILLING LARGER HOLE IN AN ELECTRICAL LUG ON THE END OF A 5FT WELDING CABLE PIGTAIL USING A 15/32IN DRILL BIT IN A DRILL PRESS THE BIT CAUGHT IN THE LUG & START ED WHIPPING THE CA BLE CUT LEFT THUMB & TEMPLE SUTURES REQUIRED HE DID NOT CLAMP DOWN LUG & DOESNT RECALL IF HE WAS WEARING HIS HARD HAT

EMPLOYEE WAS USING HAND GRINDER ON FEED CHUTE WHEN TWO PIECES OF METAL WENT INTO HIS RIGHT EYE. HE WAS NOT WEARING SAFETY GOGGLES OR A FACE SHIELD OVER HIS SAFETY GLASSES.

EE WAS TRYING TO REPLACE A VALVE ON AN AIR LINE THAT HAD BLOWN OFF. THE VALVE BLEW OFF AGAIN AND HIT HIS LEFT THUMB. SMALL CRACK END OF BONE.

EE WAS WELDING INSIDE FAN HOUSING IN CLOSE AND AWKWARD POSITION AND HURT HIS HIP CHIROPRACTOR.

LIFTING PAVEMENT BREAKER THAT HAD BECOME WEDGED IN CONCRETE AND STRINED BACK AND SHOULDER.

EMPLOYEE HAD TO WELD PIPE FROM AWKWARD BODY POSITION WHIL EIN A MANLIFT BASKET AND HURT HIS BACK.

EMLOYEE WAS USING AIR LANCE TO CLEAN STAMLER AND STRAINED SHOULDER.

EMPLOYEE WAS WELDING WITH ANOTHER WELDER AND GOT FLASH BURN IN BOTH EYES.

EMPLOYEE WAS DUMPING #5 KILN BYPASS DUST WHEN HOT MATERIAL SUDDENLY FLOWED ONTO FLOOR MATERIAL GOT OVER THE TOP OF HIS BOOTS & BURNE HIS ANKLES

EMPLOYEE WAS STEAM CLEANING GAS TANK-STEAM CAME OUT OF TANK AND BURNED LEFT ARM ABOVE GLOVES.

EMPLOYEE WAS STARTING A WATER PUMP AND WHILE HE WAS PULLING ON STARTER CORD HE FELT PAIN IN LOWER BACK.

EMPLOYEE WAS WELDING MANHOLE FRAME WHEN IT SLIPPED OFF CHANNEL IRON & HIT HIS FINGERS

EMPLOYEE WAS HELPING WELDER & GOT FLASH BURN IN RT EYE

EE WAS WATER BLASTING PREHEATER WHEN HOT KILN FEED BLEW OUT OF A PORT BECAUSE AIR CANNON WENT OFF. BURNS UNDER RIGHT ARM AND ON HIS BACK.

54736YEE'S HAND SLIPPED AND FINGER CONTACTED FIVER SAW BLADE WHILE OPERATING CUT OFF SAW. LACERATION LEFT INDEX FINGER.

41389NIST WAS DRILLING HOLES AND GOT FLASH BURNS IN RIGHT EYE FROM NEARBY WELDER.

EMPLOYEE WAS CLEANING ROOF OF BUILDING WITH PAYEMENT BREAKER AND PULLED MUSCLE IN LOWER BACK.

EMPLOYEE WAS BLOWINF OUT CHUTE WITH AIR LANCE,HAND CRAMPED AND BRUISED RIGHT HAND.FIRST REPORTED TO PERSONNEL OFFICE 07-07-92.