Buscar en el registro

HOLDING ON TO WINCH LINE, HIS LEFT INDEX FINGER BECAME TRAPPED BETWEEN WINCH LINE AND VEHICLE BUMPER.

EE WAS GRINDING & A PIECE OF METAL STRUCK A PIPE & FLEW BEHIND HIS GLASSES STRIKING HIM IN THE EYE

EE WALKED BY A MAN GRINDING A WELD & FELT SOMETHING HIT HIS LEFT EYE. HE SAW A DOCTOR & HAD A PIECE OF METAL REMOVED. HE STATED HE HAD HIS SAFETY GLASSES ON AT THE TIME OF THE ACCIDENT.

FLASH BURNS TO BOTH EYES.

CUTTING BOLTS OFF FLANGE AND SLAG AND HOT METAL WENT THROUGH SLEVE AND BURNT ARM.

EE WAS JACKHAMMERING MUD RING FROM KILN WHEN SECTION CAME LOOSE AND STRUCK HIM IN THE LEFT SIDE OF HEAD.

EMPLOYEE WAS CLEANING A PLUGGED FEED SPOUT ON #2 KILN WITH AN AIR LANCE. THE FEED CAME OUT OF THE SPOUT AND STRUCK HIM ON CHEST AND ARMS.

CEMENT BAG FAILED CAUSING CEMENT DUST TO BLOW IN THE FACE OF THE EE, BEHIND SAFETY GLASSES.

OPERATING CONDOR. SUDDEN STOP. STRUCK ARM AND WRIST ON CAGE.

WAS JACKHAMMERING CASTABLE IN COOLER THROAT AND LARGE PIECE BROKE LOOSE, FELL DOWN, AND STRUCK LEFT HAND.

ACETYLINE FLASHED ACROSS OXYGEN THAT WAS STILL PRESENT ON CUTTING TORCH TIP, FLAME CONTACTED LEFT WRIST.

ADJUSTING WEIGHT BEAM ON PACKING MACHINE WHEN MACHINE WAS ACTIVATED FINGERTIP WAS CAUGHT BETWEEN MICROSWITCH & BEAM

CHECKING BAGS 1 FINISH MILL DUST COLLECTOR MOVING BAGS ABOUT TO LOOK FOR HOLES LOOKING UP DUST BLEW INTO BOTH EYES.

HAD ATTACHED CABLEFROM OVERHEAD CRANE TO FRONT END LOADER ARM HAD INTENDED TO INCH ARM UPWARD ACCIDENTLY HIT UP BUTTON CABLE ATTEMPTED TO LIFT ENTIRE LOADER CABLE SNAPPED STRIKING NOSE & FACE

EMPLOYEE WAS TEARING OUT BRICK WITH A ROBOTIC TEAR OUT MACHINE WHEN HE GOT TOO CLOSE TO THE BASE LEGS. THE LEGS VIBRATE AND LANDED ON THE TOP OF HIS LEFT FOOT.

STEPPED INTO HOT RAW MATERIAL DUST WHICH AHD SPILLED OUT THROUGH BROKE SEAL OF MILL.

CUTTING METAL SHEET 17" X 18" X 3/8" WITH CUTTING TORCH. THE CUT PIECE FELL, STRUCK FLOOR AND PART OF PIECE HIT FOOT.

WAS BLOWING KILM DUST OUT OF HOPPER WITH AIR LANCE. DUST BLEW INTO BOTH EYES.

61203UTTING PIECE OF METAL WITH CUTTING TORCH, TORCH BLEW BACK BLOWING HOT METAL FRAGMENT BEHIND SIDE PIECE OF SAFETY GOGGLES STRIKING EYE LID.

WHILE USING CUTTING TORCH OVERHEAD, EE FELT SOMETHING HIT LEFT EYE UNDER HIS GOGGLES.

BOTH HANDS BECOMING NUMB AT NIGHT, INCREASINGLY MOER OFTEN PARTICULARLY LAST 6 MONTHS. OPERATING MACHINE.

ELMPLOYEE WAS WELDING OVERHEAD AND HOT SLAG DROPPED DOWN AND BURNE DHIS FOREARM.

EMPLOYEE DEVELOPED SORE BACK MANIPULATING VAC-ALL HOSE ALL DAY.

EMPLOYEE WAS DRILLING THROUGH STEEL PLATE, DRILL HUNG UP AND SNAPPED HIS RIGHT WRIST, HAND AND ARM AGAINST STEEL PLATE. DRILL WAS NOT STRAIGHT UP AND DOWN.

EMPL WAS JACKHAMMERING AND FELT SOMETHING GET IN EYE.WAS WEARING SAFETY GLASSES.SOUGHT MEDICAL ATTENTION 12-5 WHEN IRRITATION PERSISTED.

EMPLOEYE WAS WATCHING CRANE AND GOT DUST IN HIS EYES.HE WAS WEARING SAFETY GLASSES.HE DID NOT SEEK MEDICAL ATTENTION INTIL 08-21-91.

PATIENT DEVELOPED PAIN IN ARM WHILE USING JACKHAMMER.

EMPLOYEE STATES HE WAS WELDING AND GOT SOMETHING IN HIS LEFT EYE.

EMPLOYEE WAS USING A JACKHAMMER AND DEVELOPED A SWELLING IN HIS HANDS.HE WAS REMOVING CASTABLE IN #2 COOLER.

EMPL WAS WASLKING BY AREA WHERE ANOTHER EMPL WAS GRIDING & FELT SOMETHING FLY IN EYE. INJ WAS WEARING SAFETY GLASSES.

EMPLOYEE NOTICED IRRITATION IN EYE WHILE WORKING. EXACT CAUSE UNKNOWN. DID NOT REPORT ACCIDENT UNTIL 8-13-90.

EMPLOYEE SAID HE WAS WORKING ON UNSPECIFIED EQUIPMENT THAT SLIPPED AND HE HAD TO SUPPORT HIMSELF WITH HIS SHOULDER. DID NOT REPORT ACCIDENT UNTIL 6-30-89. WE QUESTION THE VALIDITY OF THIS ACC IDENT.

EMPLOYEE WAS BURNED ON HIS RIGHT ARM BY WELDING ARC.

HE WAS BURNING A PIECE OF FLANGE WHEN WELDING SPARKS LANDED ON HIS RT ARM & BURNED IT

EMPL USING VAC-ALL TO CLEAN UP DUST SPILL.WHILE MANIPULATING HOSE ARM WAS CAUGHT IN SUCTION AND PULLED INTO HOSE.

EE LOST CONTROL OF AIR HOSE AND SLUMMED UNIT INTO WALL. DID NOT SEEK MEDICAL ATTENTION TIL 6-6-89. DID NOT RECEIVED DR REPORT UNTIL 6-23-89.

ASSISTING ANOTHER IM POSTIONING GEAR BOX FORM KILN FEED DUST SCREW CAHIN HOLDING GEAR BOX ON HOIST BROKE GEAR BOX FELL AOBUT 2 FT CLIPPING PALLET. PALLT FLIPPED UP AND STRUCK INJ ELOBW.

THE CYCLONE HOPPER BACK OF KILN PLUGGED WIHT CHUNKS INJ REMOVING CHUNKS THROUGH BOTTOM POTHOLE WHEN TOP PORTHO;LE CAME OFF AND HOT DUST CAME OUT HITTING L. ARM.

GRINDING,GRINDER KICKED BACK AND HIT HIM IN FACE.

EMPLOYEE WAS WELDING & HOT SLAG HIT HIS ARM CAUSING A BURN HE DID NOT REPORT THE ACCIDENT OR SEEK MEDICAL AT TENTION UNTIL APRIL 12 1989

PATIENT WAS JACKHAMMERING REFRACTORY OUT OF CLINKER COOLER AND DUST GOT IN HIS EYE

EMPL LOADING LIME TRUCK WHEN AIR LANCE PULLED AWAY FROM INSPECTION PORT.THIS CAUSED DUST WHICH BLEW INTO EMPL EYES.TAKEN TO PLANT DR WHO REC. HE KEEP PATCH OVER EYE FOR 24 HRS.GAVE HIM DROPS T O PUT IN.SAW DR 2-8-89.

HE WAS WELDING AND CHIPPING ON A PICE OF METAL FLEW UP INTO HIS LEFT EYE.

HE WAS GRINDING A WELD JOINT AND FOREIGN MATTER WENT BEHIND SAFETY GLASSES INTO RT EYE WENT TO THE DR 12-7-88

EMPLOYEE WAS OPERATING DOZER ON UNEVEN GROUND AND DEVELPED PAIN IN HIS BACK.

THE EMPLOYEE HAD STATED THAT HE WAS GOING TO REMOVE A BOLT FROM THE COAL FEED SCREW WE WILL NOT BE ABLE TO DETERMINE WHAT TOOK PLACE UNTIL I NAME CAN TELL US WHAT ACTIONS HE TOOK AFTER THAT PO INT. THE EMPLOYEE S ARM WAS PUT INTO OR DRAWN INTO A COAL FEED SCREW THAT WAS RUNNING AN AMENDED FORM WILL BE SENT IN WHEN FURTHER INFORMATION IS AVAILABLE.

EMPLOYEE WAS US3NG A STEAM CLEANING WAND THE WAND SLIPPED AND STRUCK HIS FOOT CAUSING A DEEP SECOND DEGREE BURN

EMPLOYEE WAS CL9ANING EYE BEAMS OFF A CONVEYOR A PIECE OF STEEL BLEW INTO EYE HE HAD THIS FOREIGN MATTER REMOVED FOREIGN MATTER PUNCTURED INSIDE OF RT EYE

EMPLOYEE WAS BU9NING HOLES IN TOP OF PIPE OVERHEAD-SHAVINGS FROM GALVANIZED PIPE FELL INTO LEFT EYE.

EMPLOYEE USING 3MPACT WRENCH, PIECE OF SHAVING WENT BETWEEN SAFETY GLASSES & INTO LEFT EYE.