Buscar en el registro

The employee was leaning to pick up a water bottle and hit a bump while operating the scraper. After hitting the bump the seat bounced causing EE to bounce up and cut EE's ear on a GPS bracket.

While replacing bin pulley assembly, employee was removing a bolt with a 1/2 impact and a 15\16 ratcheted box end wrench. The wrench spun, trapping finger between the wrench and the bracing resulting in the loss of the tip of left ring finger.

Employee reported cumulative trama to back from operating equipment for many years.

Struck on hard hat by a (approximately) 10 lb cobble

A plugged pump created steam, and when EE attempted to unplug, he was burned by steam as it evacuated the line.

Employee was cleaning inside of driveover feeder at Thoming pit using a demolition hammer. While he was cleaning the side walls he strained his right elbow and arm. His fingers began to go numb. The employee reported it to his supervisor but said that he did not require medical treatment.

Employee was air arcing to scarf out the crack on the goose neck of the scraper. He felt something in his left eye.

Air wrenching off bolt of cutting edge, gloves on, put palm of left hand on head of bolt. Bolt spun causing the glove and then the hand to be lacerated.

While drilling into rubber stock, the drill bit caught on the underlying surface causing drill to jerk. As a result, ee's hand was strained. On 9/14/07 he reported he was having problems with the hand & requested a medical evaluation. diagnosis required physical therapy resulting in a recordable injury.

While removing a cutting edge bolt, Joe's hand slipped resulting in a cut to his left middle finger.

Employee was installing catwalk to pond pump. He was using 4" grinder with 7" cutting wheel modify handrails and toe boards to fit. As he was cutting, the cutting wheel bound up and grinder kicked back causing 1" cut.

EE WAS OPERATING A 637 SCRAPER. A DOZER WAS PUSHING THE SCRAPER THROUGH THE SLICK. THE DOZER HIT THE SCRAPER WITH MODERATE FORCE CAUSING A JOLT TO THE SCRAPER OPERATOR.

Changing bit in electric drill resulted in laceration to web of right hand.

EE landed against a new weld; steam from a wet sweatshirt caused burn- first aid administered.

AS THE EMPLOYEE WAS BLOWING OUT BOLT HOLES WITH AN AIR WAND A PIECE OF DIRT OR ROCK FLEW INTO HIS RIGHT EYE.

EE WAS GRINDING WITH A 4-1/2" HAND GRINDER AND THE GRINDER KICKED BACK AND STRUCK EE IN THE FACE.

EE WAS CUTTING A MILLSCALE & A PIECE FLEW UP UNDER HIS GLASSES INTO HIS RIGHT EYE.

EMPLOYEE WAS CUTTING SOME NOTS OFF WITH CUTTING TORCH IN A DISCHARGE CHUTE. A FIRE STARTED AND IN THE EMPLOYEE'S HASTE TO EVACUATE, HE BUMPED INTO THE FEED CHUTE AND BRUISED HIS RIBCAGE.

AS EE WAS CUTTING PLATE WITH A TORCH SCRAP PIECEFELL & CUT RT THIGH

EE WAS USING AN OVERHEAD HOIST TO TURN OVER A SCREEN DECK FRAME. THE ROD HOLDING EYE BROKE ON THE SCREEN FRAM, DROPPING THE FRAME ON THE EE'S LEFT FOOT BEHIND THE STEEL TOE AREA.

EMPLOYEE WAS HOLDING BOLT WITH WRENCH WHILE USING IMPACT ON NUT. WRENCH SPUN LOOSE & STRUCK HIM.

USING RIGHT ANGLE GRINDER, WHEEL OF DRINDER BRUSHED AGAINST LEFT KNEE. 2.7CM LACERATION LEFT KNEE.

EMPLOYEE WAS CUTTING & WELDING ON #7 SCREEN AND GOT EITHER METAL OR SLAG IN HIS EYE.

EMPLOYEE HIT A BUMP IN THE HAUL ROAD WHILE OPERATING SCRAPER.

EMPLOYEE WAS RUNNING A 631 SCRAPER. DOZER WAS PUSHING 631 AND LOST TRACTION. HE SLID INTO BACK OF 631, JARRING EMPLOYEE. CO. WAS NOTIFIED OF INJURY ON 6-9-95.

EMPLOYEE WAS WELDING TOP DECK OF SCREEN, #1 SCALPER. HOT SPARK BURNED LEFT ELBOW. BURN WAS REPORTED TO BE SWOLLEN AND WARM TWO DAYS LATER.

EE WAS WELDING UNDER #3 SCREEN. HE TWISTED AND PULLED A MUSCLE IN HIS BACK.

SCRAPER HIT A BUMP. EMPLOYEE BUMPED HEAD ON CAB.

REPAIRING AT ROCK PLANT USE OF A CUTTING TORCH BURNT HIS LEFT WRIST.

EE LAYING ON SIDE INSIDE OF SCREEN USING CUTTING TORCH TO MAKE BOLT HOLE HIS ARM TOUCHED HOT PIECE OF METAL.

EMPL SUPV HARDFACING OF ROLLS CRUSHER AS HARD FACING COOLED SMALL PIECE OF SLAG POPPED OFF AND ENTERED EYE.EMPL WAS WITHIN 4-5\ OF ROLLS BELIEVES SLAG ENTERED EYE PAIN NOTED AFTER SHIFT .WENT DR. WHO REMOVED PARTICLE-RECOMMENDED NOT WORKING IN ROCK PIT FOR 1 WK.