Buscar en el registro

Changing bit subs, caught finger between lifting bell and winch line hook. This resulted in loss of fingernail and 4 stitches on the middle finger of the right hand.

Employee reported a sore back and the injury was initially treated as a muscle strain - first aid. After the back did not improve, he went to a chiropractor for an MRI and subsequent treatments which began on 8/13/07. At this time the injury became reportable.

Single part down haul ball on crane was 2 blocked which caused the cable to be severed. Employee's right hand was struck by falling down haul ball.

After completing a water pressure test, crew was resuming drilling operations. When making a connection, some drilling foam (drill detergent) bubbled up the center tube and splashed into the helper's face. The foam sprayed under his safety glasses and irritated his right eye. Eye was washed out and prescription for eye drops received. Helper returned to work.

Loosening casing clamp & the driller turned away from the drill to explain to the new helper what was going on. He pulled the lever for the top head & ran it all the way down to clamp shell. That pulled against cable, snapped the cable that was holding clamp shell & came down. That smashed injured helper's finger between clamp shell and casing clamp.

Employee was thawing out a drain valve with a propane torch. The liquid farther up the pipe thawed out first. When the ice at the bottom of the pipe thawed and released, the fluid and ice came out of the pipe under pressure. striking employee on the right side of the face and under safety glasses. Abrasion to eye. Dr. prescribed antibiotic as a precautionary measure.

Employee was adjusting the stock while the saw was running. The saw blade grabbed his glove and caught the end of his finger (the tip of the middle finger).

EMPLOYEE WAS WELDING AND THERE WAS THREE OTHER PEOPLE WORKING BESIDE HIM AND THEY WERE GRINDING & USING AN AIR ARC CLOSE BY. SOME OF THE SPARKS FROM THE GRINDER WENT INTO HIS EYE. THIS WAS A ONE DAY ASSIGNMENT.

EE WAS USING A JACKHAMMER CLEARING A PLUGGED CHUTE IN #2 RECLAIM FEEDER AND LATER THAT DAY HIS BACK STARTED TO HURT.

ACCIDENTALLY BUMPED THE AIR ARC TRIGGER.

EMPLOYEE WAS REMOVING STARTER FROM CAT 994 LOADER. EMPLOYEE HAD SLING ATTACHED TO OVERHEAD CRANE TO SUPPORT STARTER. EMPLOYEE INADVERTENTLY ACTIVATED HOIST CAUSING THE STARTER TO BREAK FREE. STARTER STRUCK EMPLOYEE ON LEFT FOREARM CAUSING A FRACTURED ULNA BONE. EMPLOYEE PLACED ON LIGHT DUTY.

EE STATED THAT WHILE WELDING A CRACK ON A DUMP BODY, HE RECEIVED FLASH BURNS TO BOTH EYES.HE IS NOT SURE THE EXACTTIME OF DAY THIS HAPPENED.

EE WAS GETTING CABLE OFF FROM BACK OF BOOM TRUCKWHILE ANOTHER WORKER WAS LOWERING OUTRIGGERS. EELEFT FOOT WAS CAUGHT UNDER OUTRIGGER FRACTURING TWO TOES. EE PLACED ON LIGHT DUTY.

EE WAS GRINDING ON LOADER BUCKET AND TWO DAYS LATER NOTICED THAT HE HAD SOMETHING IN HIS EYE. EE WENT TO DR AND HAD SMALL METAL PORTICLE REMOVED FROM EYE. EE STATES THAT HE WAS WEARING SAFETY GLASSES AND FACE SHIELD DURING WORK ACTIVTIES.

EMPLOYEE WAS WELDING AND NOTED IRRITATION IN EYE. THE NEXT DAY EMPLOYEE OBSERVED OBJECT IN EYE. DOCTOR FOUND AND REMOVED SMALL METAL PARTICLE FROM EYE.

THE CREW WAS PREPARING TO PUT CORE CASING IN A PREVIOUSLY DRILLED HOLE. JUST AS THE FIRST JOINT OF CASING WAS BEING HOISTED INTO PLACE THE INJURED WORKER PUT HIS HAND ON THE CLAMP HOLDING THE PIPE HIS MIDDLE R FINGER BECAME STUCK BETWEEN THE CLAMP AND LIFTING HOOK. THE TIP OF THE FINGER WAS PINCHED AND SEPARATED FROM THE HAND.

THE EE WAS HANDLING THE ROD SLING WHILE THE ROD WAS BEING WINCHED UP, THE HOOK ON THE WINCH LINE DISENGAGED FROM THE ROD SLING, THE RODD DROPPED ON EE'S RIGHT BOOT.

HE WAS WASHING RODS INTO HOLE AND SMASHED RIGHT FOREFINGER AND THUMB BETWEEN THE WATER SWIVEL AND THE HEAD ON AN LF-70 CORE DRILL.

A CO-WORKER THOUGHT EE WAS READY TO PUSH THE TONGS INTO PLACE, HE WAS NOT READY & HIS FINGER WAS PINCHED BETWEEN TONG HANGER & DRILL TABLE, CUTTING THE TIP OF HIS FINGER.

EE CUT OFF A PIECE OF STEEL PLATE (1/4" X 18" X 14") USING A GAS TORCH. THE PIECE OF STEEL FELL OFF OF THE CUTTING TABLE AND STRUCK HIS LT. THIGH. THE RESULT WAS A LACERATION WHICH REQUIRED 3 SUTURES TO CLOSE.

EE WAS SITTING IN 240 TON HAUL TRUCK BEING LOADED BY 2800 P&H SHOVEL. THE SHOVEL BUCKET OPENED PREMATURELY DROPPING A LARGE BOULDER INTO THE TRUCK BED. THE RESULTING "JOLT" CAUSED THIS INJURY

EE HAND WAS CAUGHT BETWEEN THE CASING 18" THE WORK PLATFORM WHEN HE TRIED TO KEEP THE CASING FROM BEING HIT WITH THE ROTARY HEAD WHICH WAS LIFTING THE CASING OFF THE WORK PLATFORM.

EMPLOYEE ROTATED IN REVERSE, CAUSED WRENCH TO SWING IN WRONG DIRECTION. TO CORRECT ERROR, EMPLOYEE SWITCHED ROTATION IN OTHER DIRECTION, CAUSING WRENCH TO SWING AROUND AND COME OFF OF WRENCH S LOT, STRUCK EMPLOYEE ON RIGHT THIGH. IMPACT KNOCKED HIM OFF WORK PLATFORM, FELL TO GROUND AND STRUCK HIS HEAD ON BIN.

EE WAS CUTTING METAL SIDING SEVERAL HOURS LATER HE FELT SOMETHING IN HIS EYE. EE DID NOT RECEIVE DR S REPORT UNTIL 5-29-96.

EMPLOYEE SHOULD HAVE HAD HELP IN MAKING A PIPE CONNECTION, BUT GOT IN A HURRY TO MAKE THE CONNECTION AND BEGAN DRILLING. THE EMPLOYEE PINCHED HIS LEFT HAND BETWEEN THE DRILL PIPE AND CAROUSEL INJURING LEFT HAND RING FINGER-REQUIRED SUTURES.

EMPLOYEE WAS OPERATING AN IMPACT WRENCH WHEN THESOCKET BROKE CUTTING HIS LEFT HAND. FIVE SUTURESWERE NEEDED TO CLOSE THE WOUND.

EE WAS TRIPPING RODS, DRILLER RAN WINCH TOO FAST, & HELPER ENDED UP WITH MORE WEIGHT THAN HE EXPECTED. CAUSED LOWER BACK STRIN. THE EE DID NOT REPORT THIS AS A WORK RELATED INJURY WHEN IT OCCU RRED ON 7/15. HE SOUGHT TREATMENT WITH HIS PERSONAL MD, HOWEVER, PAIN BECAME WORSE OVER COURSE OF TIME & HE FILED AS WORKER'S COMP.

EE WAS OPERATING A HAND GRINDER WHEN HE OBSERVED A SMALL FIR CAUSED BY THE GRINDING SPARKS. HE TURNED OFF THE GRINDER AND SET IT SIDE. HE THEN CONTACTED HIS LEFT FOREARM WITH THE SPINNING GRIN DER WHEEL. SUTURES WERE REQUIRED TO CLOSE THE WOUND.

EE ATTEMPTED TO LIFT AN ORE CHUTE WITH AN OVERHEAD CRANE WHEN THE CHUTE DOOR FELL ON HIS LEFT FOOT RESULTING IN A HAIRLINE FRACTURE OF METATARSAL LEFT FOOT.

MAKING A HORIZONTAL CUT WITH A POWER SHEARS ON METAL SIDING. METAL SNAPPED UP CUTTING HIS LITTLE FINGER ON HIS LEFT HAND.

RIGHT THUMB SMASHED. HE WAS BREAKING CORE LOOSE ON THE BOTTOM OF THE HOLE BY TAPPING THE ROD STRING ON THE BOTTOM OF THE HOLE. HIS HAND WAS ABOVE THE CHUCK ON THE DRILL STRING AND THE STRING H IT A VOID, CAUSING THE RODS TO DROP. WHEN THE RODS DROPPED, HIS THUMB WAS CAUGHT BETWEEN THE WATER SWIVEL AND THE CHUCK.

INJURED HAD BEEN DOING ALOT FO WELDING THAT DAY AND WE THINK THAT HE TIPS HIS HEAD BACK BACK BECAUSE OF HIS RX GLASSES AND THE WINDOW IN HIS WELDING HOOD.

WHILE BLADING HAUL ROAD A BOLT CAME OUT OF THE SEAT CAUSING THE SEAT TO TIP SIDEWAYS & IT PUT A STRAIN ON HIS BACK

GRINDING METAL CLAMED IN A VICE, SET DISC GRINDER ON WELDING BENCH, TRIGGER WAS LOCKED ON. DISC WAS STILL TURNING AT FULL SPEED AND KICKED BACK INTO HIS LEFT FOREARM.

WAS BUILDING EXPLORATION ROAD AND WAS GOING UP STEEP GRADE WHEN THE DOZER LOST TRANSMISSION PRESSURE AND ROLLED BACKWAD UNTIL IT CAME TO RES AGAINST A ROCK

I NAME WAS PUSHING ORE OVER THE EDGE OF THE STOCKPILE WHEN A HYD. LINE BROKE ON RAM SPRAYING OIL ON THE MANIFOLD AND THE OIL CAUGHT FIRE.

GRINDING PIECE OF METAL FOR WELDING REMOVED SAFETY GLASSES THINKING JOB DONE.FOUND ONE MORE SPOT AND FORGOT TO PUT GLASSES ON AN D GOT PIECE OF METAL IN RIGHT EYE.