Buscar en el registro

Miner cut EE's left ring finger while changing segment plates from a John Deere 944K loader bucket requiring 8 stitches. Miner was holding bolt head as EE impacted the nut with the impact wrench spinning the head of the bolt.

While pull starting a chainsaw the miner felt a pop in the left wrist. X-Rays were taken and came back as negative but the miner was placed on restricted duty by the doctor to rest the wrist.

Miner was cutting/grinding a 20'x5" Channel Iron when it fell from the work bench catching left glove on the way down. This resulted in a strain to EE's left shoulder when it jerked EE's left arm. Miner has been placed on restricted duty and a MRI of the shoulder is pending.

EE was using an impact gun to remove a 3/4" nut from a bolt. As the nut loosened, the impact gun kicked back and struck EE above the left eye (between his safety glasses and hard hat) causing a laceration above his left eyebrow. EE was taken for medical treatment, received 4 stitches for the laceration and was released to work with no restrictions.

While operating the water pull the miner was looking back at the sprayers located behind the operator stations view. As the miner turned back forward she felt a pull in her back like it was getting a spasm. Miner described pain as in the lower part of her back shooting down towards her leg.

Employees were taking turns as one welded the heal plates into the loader the other would then grind. Employee was injured by indirect exposure of UV rays from his coworker who was welding He was wearing an auto darkening welding hood; The hood was on shade level #5 for grinding.

While trying to install the basket on the K400 cone crusher, the basket moved toward the engine housing pinning the employees arm.

He was cutting the screen bolts off and when he shifted to cut the next bolt the torch tip got caught in his glove.

While watching over his crew perform various welding, cutting, and using the plasma ark through out the day, he injured his eyes.

Was welding he got flash burns.

As he was drilling a hole in a belt, the drill slipped and went into his finger.

He was holding a piece of wood and as he proceeded to shoot a nail through the wood he missed and the nail went through his thumb.

HE WAS ASSISTING IN A LINER CHANGE AND WHILE REMOVING BOLTS HIS CO-WORKER WAS USING AN IMPACT GUN TO REMOVE THE BOLTS, SUDDENLY A NUT FLEW TOWARD HIM STRIKING HIN IN THE MOUTH.

HE WAS USING A HIGH PRESSURE AIR HOSE TO CLEAN DIRT AND DEBRIS FROM THE NEW JAW LINERS WHEN SOMETHING FLEW INTO HIS EYE.

WHILE HE WAS LOOSENING NUT ON THE CRUSHER, A WIRE WHICH HELD THE SOCKET ONTO THE IMPACT GUN CAME AROUND AND CUT HIS LEFT HAND FROM THE THUMB AROUND TO THE 1ST FINGER.

EE WAS CUTTING REBAR & A PIECE SPRANG BACK & HITTHE TORCH. THIS CAUSED THE TORCH TO TURN & HIT EE ON THE NECK CAUSING 2ND DEG BURNS

HE WAS GRINDING ON A METAL PLATE WHEN A GUST OF WIND SHIFTED THE DEBRIS INTO HIS RIGHT EYE.

HE WAS WELDING AND GRINDING BOLTS TO INSTALL NEW PULLEYS FOR THE HOPPER BOOT. A PIECE OF METAL FLEW INTO THE EE'S RIGHT EYE.

HE WAS INSTRUCTED BY HIS SUPERVISOR TO WELD A GURARD FOR THE DRY SCREEN, THE WAS NOT PROVIDED WITH ANY TYPE OF PROTECTIVE EQUIPMENT FOR THIS JOBTASK. HE PROCEEDED TO WELD FOR APPROX.30 MINUTES AFTER COMPLETING THE JOB HE WENT BACK TO HIS REGJOB OF OPERATING THE LOADER. AT APPROX. 7PM HE BEGAN TO FEEL BURNING IN BOTH HIS EYES.

AS HE WAS SHOVELING SPILLED MATERIAL ONTO THE RETURN BELT A LARGE ROCK BOUNCED OUT OF THE CONE STRIKING HIM ON THE RIGHT SIDE OF HIS HARD HAT.

EE WAS OBSERVING THE DRIVE BELTS IN THE CONE CRUSHER TO SEE IT THEY WERE SLIPPING, THE BELT BROKE HITTING HIM IN THE FACE AND HAND.

EMPLOYEE HAD HIS HAND ON I-BEAM WHILE USING THE IMPACT GUN; IT CAME OFF THE SOCKET AND SLAMMED DOWN ON HIS FINGER.

WAS USING A DIE GRINDER TO REMOVE A BROKEN FASTENER. MOVED GRINDER OUT OF THE WAY TO CHECK FASTENER THE GRINDER WAS STILL RUNNING WHEN IT HIT HIS HARD HAT & CUT HIS FOREHEAD

HE WAS CUTTING OLD WING WALLS OFF THE TOP OF A FEED HOPPER. HE ANTICIPATED THE WASS TO FALL AWAY FROM HIM. THE WING WALL FELL TOWARD HIM, LANDING ON BOTH LEGS.

WHILE CUTTING AN OLD HINGE OFF THE BATTERY BOX APIECE OF HOT SLAG FELL INSIDE THE TOP PART OF HIS BOOT & CAUGHT HIS SOCK ON FIRE, CAUSING A 3RD DEG BURN

WHILE WELDING ON THE SCREEN PLANT, HOT METAL FELL ON THE PLASTIC SCREEN. THE EMPLOYEE INHALEDFUMES FROM THE PLASTIC AND SUDDENLY FELT VERY CONJESTED.

HE WAS CLEANING AROUND THE CRUSHER WHEN A ROCK FELL FROM THE SCREEN AND HIT HIM ON THE HEAD.

WHILE REMOVING A WING WALL FROM SAND SCREW, EMPLOYEE WAS IN A PINCH POINT AREA. WHEN WING WALL WAS CUT FREE FROM THE SAND SCREW IT SWUNG OUTON THE COME ALONGS THAT SUPPORTED IT AND PINCHED HIS LEFT FOREARM BETWEEN THE WING WALL AND SAND SCREW.

HE WAS WORKING ON A FEEDER GRINDING GUSSETS FOR THE FEEDER MAIN FRAME, WHEN SUDDENLY A SMALL PIECE OF METAL FLEW INTO HIS LEFT EYE.

HE WAS REMOVING THE CUTTING EDGE ON A LOADER. WHILE USING AN IMPACT WRENCH AND HOLDING THE BOLT. WHEN THE BOLT CAME OUT OF THE KEEPER IT SPUN AROUND CUTTING HIS RIGHT HAND.

WHILE INSTALLING A TRANSMISSION THE EE WAS KNOCKED DOWN TO THE GROUND WHEN THE TRANSMISSION WAS SWUNG INTO PLACE IT HIT HIM. EE DID NOT TURN IN A REPORT & DID NOT REPORT TO SAFETY UNTIL 1/7/99

HE WAS WORKING ON A NEW FUEL TANK FOR CR #6. WHILE HE WAS USING A NEEDLE GUN, SOME METAL DUST FELL IN HIS LEFT EYE.

WHILE CHECKING THE AC SYSTEM HE STUCK HIS HAND BETWEEN THE CONDENSOR & BLOWER MOTOR NOT REALIZING HIS HAND WAS TO CLOSE TO THE FAN MOTOR, WHEN HIS FINGER [LEFT] INDEX WAS CUT.

EE WAS ARC GOUGING ON LOADER BUCKET AND A PIECE OF SLAG DROPPED INTO HIS BOOT BURNING HIS ANKLE BONE ON THE OUTSIDE OF THE HIS LEFT FOOT.

HE WAS USING THE CHOP SAW AND THE BLADE CAUGHT AN ANGLE IRON TWISTING AND SMASHING HIS FINGER.

WHILE HOLDING A BOLT WITH HIS LEFT HAND INDEX FINGER. HE PUT PRESSURE ON THE OTHER END OF THE BOLT WITH A IMPACT GUN. THIS SPUN THE BOLT CUTTING HIS FINGER.

HE WAS GRINDING PLATES & A PIECE OF METAL WENT AROUND HIS FACE SHIELD & PENETRATED HIS RIGHT EYE.

HE WAS CLEANING AROUND THE CRUSHER WHEN THE CONE BACKED UP AND A ROCK CAME OUT OF THE BASKET AND HIT HIS RIGHT ARM.

HE WAS HELPING A CO-WORKER WHEN HE WAS HANDED A HOT TORCH HEAD ASSEMBLY WHILE IT WAS HOT.

EE WAS USING THE TORCH TO CUT SOME PIPE BY THE POND AREA. WHEN HE ACCIDENTLY BURNED HIS RIGHT HAND. [4 FINGER - MIDDLE FINGER]

HE WAS WORKING ON BACKHOE BUCKET, REPLACING BOTTOM HALF. HE WAS GRINDING THE EDGE WHEN GRINDER CAUGHT IN CORNER CAUSING IT TO KICK BACK WHICH THEN CUT HIS RIGHT KNEE.

WAS CUTTING SOME STEEL WITH THE CHOP-SAW AND LOOKED DOWN THEN SAW A SPARK FLY BY FACE AND IT WENT INTO THE LEFT EAR CAUSING INJURY IN HIS EAR CANAL.

HE WAS GRINDING ON AN AUGER IN A 637 SCRAPER WHEN HE ATTEMPTED TO SET THE GRINDER DOWN IT HAD NOT COME TO COMPLETE STOP AND HIT A PIECE OF METAL CAUSING IT TO JUMP AND INJURY HIS LEFT WRIST.

EE SHUT THE GRINDER OFF TO SET DOWN THE GRINDER WAS STILL TURNING & HIT THE BED OF EE WORK TRUCK & FELL ON EE RIGHT FOOT CUTTING THROUGH & UNJURING HIS FOOT

WAS CLEANING UNDER CRUSHER #1 WHEN A ROCK FELL FROM THE SCREEN AND HIT HIM ON THE HAND.

WELD ARCHING PLATES IN ROCK TRUCK, DIDN'T DISCHARGE HOT ROD PLACED IT ON MY LAP STUCK SELF WITH IT.

WAS CUTTING STEEL WITH A TORCH AND A PIECE OF SLAG OR SAND BLEW INTO LEFT EYE.

WHILE PASSING A ONE INCH DRIVE AIR IMPACT GUNF ROM ONE MAN TO INJURED THE TRIGGER WAS DEPRESSED TURNING THE IMPACT ON. HE HAD A HOLD OF THE SOCKE TON THE IMPACT WITH A HEAVY WIRE RUN THROUGH A LOLE INTHE SOCKET AND SQUARE DRIVE ON THE IMPACT, THE WIRE WAS BENT OVER ON EACH END, CUTTING HIS HAND WHEN THE SOCKET TURNED.

WHILE CHANGING SCREENS, THE SCREENS NEEDED TRIMMING HE USED AN ELECTRICAL CUT-OFF WHEEL. THE WHEEL BROKE OFF AND STRUCK HIM IN THE RIGHT HAND PORTION OF FOREHEAD.

WELDING WEAR ITEMS ON 988B BUCKET, METAL SHATTERED WHEN TAPPED WITH CHIPPING HAMMER. PIERCING LOWER LIP & SPLITTING TOOTH. WELD HOOD HAD TO BE LIFTED TO INSPECT WORK.