Buscar en el registro

WHILE ATTEMPTING TO UNLOADE A LIME. LIME WORK GOEE GOT SPRAYED WITH LIME THE LINE GOT INTO A RASH OR HIS ARM AND BURNED HIM THE INJURY WAS FLUSHED AND HE WAS TAKEN TO THE HOSPITAL FOR TREATMEN T.

EMPLOYEE WAS REMOVING A JACK LEG FROM UNDER MILL #1. THE JACKLEG CAME LOOSE AND BUMPED THE LADDER HE WAS USING CAUSING HIM TO BUMP SOMETHING WHICH FELL ON THE OTHER EMPLOYEE,

EE WAS WORKING INSIDE THE SAG MILL CLEANING BETWEEN LIFTERS WHEN HE HEARD A POP. A BALL CHIP FROM AN EXPLODING GRINDING BALL HIT HIS LEFT EAR. THE INJURY REQUIRED SUTURES. THE SAG MILL HAD BEEN SHUT DOWN FOR 5.5 HOURS AND BEEN RINSED WITH FRESH WATER. A PROCEDURE TO PUT A COVER MAT OVER THE GRINDING BALLS HAS BEEN SET, THIS SHOULD GUARD AGAINST SPLITTING BALLS DUE TO TEMPERATUR

EE WAS ATTEMPTING TO BLOW OUT THE CARBON TRANSFER LINE WHEN PLASTIC FITTING FAILED. THE LINE BLEW APART PEPPERING HIS FACIAL AREA WITH HIGH PRESSURE, EMBEDDING CARBON PARTICLES TO HIS FACE.

A JACK HAMMER WITH A DRIVER ATTACHMENT WAS BEING USED TO DRIVE BOLTS THROUGH A SAG MILL WALL. A PIPE WITH A HANDLE WAS USED TO SERVE AS A COLLAR TO HOLD THE DRIVER ON THE END OF THE BOLT. THE INDIVIDUAL DIDN'T NOTICE THAT HIS HAND HAD SLIPPED BEYOND THE END OF PIPE. THE DRIVER PINCHED HIS LEFT INDEX FINGER UP AGAINST THE SAG MILL WALLCAUSING A LACERATION THAT REQUIRED SUTURES.

EE WAS CHIPPING NORDBAK FROM TRUNION LINER APPROX. 6 HRS WAS WEARING SAFETY GLASSES AND SHIELD/VISOR EYE BECAME IRRITATED, HE IRRIGATED EYE, AND WENT BACK TO WORK EYEBALL WAS SCRATCHED AT PUPI L, UNKNOWN AS THE ANY IMPAIRMENT.

EMPLOYEE WAS HOISTING AN IMPELLER HANGER BY WAY OF AN OVERHEAD CRANE. THE HANGER GOT CAUGHT AND WITH TENSION IT CAME LOOSE AND HIT EMPLOYEE'S UPPER LIP CAUSING A LACERATION THAT REQUIRED STITC HES.

EE WAS CUTTING A PIECE OF METAL OVERHEAD. SOME HOT SLAG FLEW INTO HIS LEFT EAR BURNING HIS EARDRUM.

WELDER WAS REPAIRING A CLAM ON HYDROLIC SHOVEL WITH AIR ARC TORCH. THE WELDER WAS WEARING SAFETY GLASSES AND SHIELDS ON PLACE SOMETIME DURING REPAIR ACTIVITIES A PARTICAL GOT IN HIS LEFT EYE.

EE WAS GRINDING/CHIPPING SOME SLAG. OVERHEAD WHEN A SMALL PIECE OF SLAG WENT IN HIS EYE. IT WAS REMOVED BY THE DR AND A BURN TREATED WITH OINTMENT.

EMPLOYEE STATES WHILE BREAKING ROD THAT WAS ROTATING WITH WRENCH, WRENCH STARTED TO SLIP. EMPLOYEE GRABBED WRENCH WITH LEFT HAND, HAD BECAME ENTRAPPED BETWEEN WRENCH AND DERRICK. SUSTAINED FRA CTURE AND LACERATION TO LEFT HAND.

MAN WAS WORKIGN OUT OF SCISSOR LIFT HANGIGN ELECTRICAL CABLE. AS SCISSOR LIFT WAS BEING OVED, MAN HAD HIS HAND ON HAND RAIL WHICH STRUCK A VENTILATION LINE, PINCHING FINGER.

MAN WAS CHANGING DRILL BIT ON DRILL ROD WHEN A ROCK (APPROX. 4"X4") FELL APPROX. 5' AND STRUCK MAN ON HIS LEFT THUMB.

EMPLOYEE WAS CUTTING THE LIP OF A 966 LOADER BUCKET. THE BUCKET WAS ON JACK STANDS. WHEN THE LIP WAS REMOVED THE CENTER OF GRAVITIY SHIFTED ON THE BUCKET. BEFORE HE REALIZED THE SHIFT IN THE B UCKET, HE LEANED ON IT AND THE BUCKET FLIPPED OVER, LEAVING HIM UNDER IT IN THE CONCAVE PORTION.

EE PARKED ROCK BOLTER ON 12 DEG DOWN RAMP-WALKEDAROUND CORNER TO SEE IF ANY OTHER EQUIP WAS AT FACE. AS HE WAS WALKING UP RAMP ALMOST TO BOLTERTHE MAHCINE STARTED DOWN RAMP. MAN THEN TRIED TO MOUNT MOVING EQUIP. IT TRAVELED APPROX 160 ' & STRUCK FACE. EE HIT PROTECTIVE BAR OF SEAT AND CRACKED RIB DURING ABRUPT STOP.

THE EE WAS CUTTING A PIECE OF STEEL PLATE. HE WAS CUTTING A 3/4"X 2'X2' PIECE OUT OF A LARGER SHEET. THE SMALLER PIECE FELL APPROX. 3' AND STRUCK THE EE ON TOP OF THE FOOT.

AS MAN WAS INSTALLING COLLAR PIPE FOR DRILLED LIFTER HOLE A ROCK FELL OFF OF FACE AND STRUCK MAN ON HEAD AND RIGHT ARM. MAN WAS PARTLY UNDER THE LEFT DIRLL BOOM OF WHICHH ROCK WAS PARTLY UNDE R LEFT DRILL. THIS KEP MAN FROM GETTING STRUCK DIRECLTY. EST OF ROCK SIZE 10"X4'X2'. APPROX 300# TO 400#.

WHILE EMPLOYEE WAS CUTTING 4" X 4" WOOD. THE BLADE PROTECTION CAUGHT ON THE WOOD. THE SAW WAS TEN TURNED OFF. THE EMPLOYEE REACHED IN TO FREE THE COVER. HIS FINGER WAS HIT BY THE BLADE WHICH H AD NOT YET STOPPED TURNING. THIS INJURY REQUIRED 5 SUTURES.

EMPLOYEE WAS DRILLING & INSTALLING ROCKBOLTS WITH A JACKLEG DURING DRILLING OF AN UP HOLE THE STEEL RETAINER RELEASED ALLOWING THE JACKLEG TO BECOME SEPARATED FROM THE DRILL STEEL WHILE THE EM PLOYEE WAS ATTEMPTING TO REGAIN CONTROL OF THE JACKLEG THE DRILL STEEL FELL FROM THE HOLE STRIKING THE EMPLOYEE ON THE BACK OF HAND

PORTLAND CEMENT SHOT INTO BOTH EYES AND FACIAL REA. CEMENT MIX CAME OUT OF A 1" RUBBER HOSE WHICH WAS ATTACHED O A GROUTING MACHINE.

EMPLOYEE STATES WHILE OPERATING GRINDER, GRINDING A PIECE OF METAL THE GRINDER AND METAL GOT IN A BIND AND THE METAL KICKED BACK AND HIT HIM IN THE MOUTH.

EE HAD FINISHED A TACK WELD. HE HANDED THE STINGER AND ROD UP TO ANOTHER EE WHO DROPPED THE STINGER CAUSING A WELDING ARC APPROX. 3 INCH IN FRONT OF EE EYES. EE WAS ON SCHEDULED DAYS OFF 9-9, 9-10, AND 9-11.

MAN WAS WALKING BY A HOSE REEL ON A DOZER WHEN THE DOZER HIT A BUMP AND THE REEL HIT MAN IN THE HEAD.

EE WAS USING A JACK HAMMER TO BREAK UP CONCRETE. THE HAMMER SLIPPED AND SMASHED HIS RIGHT LITTLE FINGER INJURY REQUIRED THREE STITCHES.

WHILE ROCK BOLTING A LARGE ROCK DISLODGED CAUSING THE JACK DRILL TO FALL OFF THE DECK. THE MOTION OF THE FALL CAUSED THE DRILL TO FLIP UP AND STRIKE THE EMPLOYEE ON THE LEFT SIDE OF HEAD. REPO RTABLE AS A FRACTURE OF THE FACE AND SUTUTRES WERE REQUIRED.

MAN WAS BOLTING THE BACK, A ROCK FELL ONTO THE DRILL STEEL KNOCKING EMPLOYEE OFF BOLTING DECK. HE FELL 5 FT. ONTO HIS HANDS AND FEET.

ANOTHER HELPER WAS WINCHING PROBE OUT OF HOLE DRILLER STOPPED RUNNING SAND LINE PROBE WINCH SPED UP PROBE HIT INJURED HELPER IN THE FACE.

MAN WAS REMOVIGN WEAR PLATE FROM 992 LAODER AND HELD A BOTL UP WITH HIS FINGERS. WHEN THE IMPACT WRENCH SPUNTHE BOLT IT LACERATED HIS FINGER.

EE AND PARTNER WENT UNDERGROUND TO WORK ON TAMROCK BOLTER EE WAS CHECKING BELT TENSION ON ACTERNATOR. EE S PARTNER ASSUMED INJURED HAD GONE BACK TO MECHANICS TRACTOR. EE PARTNER TRIED SO START EQUIPMENT AND CAUGHT INJURED EE IN FAN BELT REQUIRED ONE STITCHES.

BACKING UP A D-11 DOZER. THE DOZER SHIFTED THROWING HIM TO THE SIDE CAUSING PAIR IN LOWER BACK.

PREPARING FACE TO LOAD THE ROUND WHILE WALKING PUSH JUMBO DRIVE THE OPERATOR MOER THE RIGHT DRIVE ARM TO GIVE ROOM FOR EE TO ARM FER FROM ITO BOLTS AND HIT THE EE IN THE LOWER BACK AND PELVIS AREA.

95751TED TRUMA AGGWATING OLD BACK INJURY OF MAYBE.

68935 BOLTING THE BACK A SMALL ROCK FELL ONTO MAIN HAND.

68935 BOLTING BACK A SMALL SPECK OF STEEL ENTERED EMPLOYEE'S EYE.

38580WERE LOADING PIPE FROM THE GROUND TO THE WATER TRUCK WITH THE CRANE AND A PIN POPPED OUT OF A JOINT OF PIPE AND HIT HIM IN THE CHIN.

PUTTING RODS IN MILL CAUGHT CAME TO SUDDEN STOP

WHILE PLACING A HAMMER INTO A HOLDING TUB, INJURED WAS USING HIS LEFT HAND TO GUIDE THE HAMMER WHILE RUNNING THE CONTROLS FOR THE WINCH WITH HIS RIGHT HAND. AS THE HAMMER WAS LOWERED, INJURED PINCHED HIS LEFT MIDDLE FINGER BETWEEN DRILL HAMMER AND HOLDING TUBE. REPORTABLE A STURE'S WERE REQUIRED ALSO FINGER FRACTURED.

MINER BOLTING BACK SM ROCK FELL ON MINERS LIP

RECIVED FLASH BURNS IN EYES WHILE CUTTING AND WELDING MOST OF THE DAY.

EMPLOYEE WAS WORKING WITH A 60 LB JACK HAMMER ADD-SHOVEL ALL WEEK-BEGAN HAVING BACK PAINA ND LEG PAIN. REPORTED TO US ON 3-10-92 AFTER PAIN DID NOT GO AWAY.

REMOVING SCREENS FROM ACID STRIN VESSEL AFTER WASHING THEM DOWN WHILE REMOVING BOLTS WITH IMPACT WRENCH EMPLOYEE FOT A DROP OF SOLUTION IN HIS RT EYE

SHOVEL OPER SWUNG COUNTER WT HIT REAR OF RTD

I NAME WAS BOLTING THE BACK & WORKING WITH WIRE MESH THE ROCK BOLTS WERE KNOCKED LOOSE & AS THEY FELL THEY TRUCK HIM IN THE CHIN LACERATING HIS CHIN

WHILE ROCK BOLTING, A ROCK FELL FROM THE BACK AND REBOUNDED OFF WIRE MESH STRIKING ON RIGHT FOREARM. REPORTABLE AS SUTURES WERE REQUIRED.

MINER DRILLING FOR ROOF BOLT PLACEMENT WHEN AIR WAS TURNED ON AT CAB,MACHINE BUCKED BACKWARDS KNOCKING HIM OFF DRILL PLATFORM.HEAD STRUCK PLATFORM,RIB OR GROUND LACERATING SCALP.REQ SUTURES.

DRILLING AT THE FACE WHEN A ROCK FELL FROM THE JUNCTION OF THE WIRE MESH AND THE FACE. THE ROCK STRUCK THE DRILL STEEL AND BROKE APART, SENDING A PIECE UP TO THE MINERS MOUTH, LACERATING THE U PPER LIP ON THE RIGHT SIDE, THEN STRUCK HIS SHOULDER BRUISING IT THEN FOREA4RM ABRADING IT SUTURES WERE REQUIRED ON UPPER LIP.

WHILE ROCK BOLTING, A ROCK FELL FROM THE BACK, STRIKING ON RIGHT FOREARM.

WHILE TIGHTENING BOLT WITH IMPACT WRENCH PIN USED TO HOLD WRENCH SLIPPED CAUSING WRENCH TO SLIP OFF CATCHING OVERALLS IN WRENCH & HITTING RIGHT FOREARM.

WHILE BOLTING WIRE MESH IN A HARD BRITTLE WASTE AREA,2 PIECES OF ROCK CAME DOWN THE 4' STEEL ONE WAS DODGED,THE OTHER ONE LANDED ON HIS INSTEP.

WHILE ROCK BOLTING INT EH 4456 DRIFT, A ROCK FELL OFF THE RIB AND LSID DOWN THE MESH, STRIKING THE EMPLOYEE ON THE BACK OF THE LEFT HEEL. SUTURES WERE REQUIRED.