Buscar en el registro

On 4/7 while tightening a lug nut the impact wrench twisted workers right arm and slipped out of their left hand. Worker didn't report injury until 4/8. Declined medical evaluation at that time. Worker continued full duty. 4/18 the worker took themselves to a specialist without company knowledge. The injury became reportable on 4/21 when they reported to work with restrictions.

The injured Driller Assistant was guiding a piece of 5-7/8" casing being lifted by the wireline to install when EE's left hand was caught between the casing EE was handling and the drill table. The middle left finger received smashing laceration and broken finger tip.

Worker was involved in a collision while operating a grader on 9/22/2022, but denied injuries and did not wish to seek medical evaluation at that time. This event became reportable on 10/12/22, when worker requested medical evaluation for neck and back pain which resulted in restricted duty assignment.

While running motor grader employee got debris in right eye. When evaluated at hospital prescription medication was given to treat irritation.

Employee jarred back when loading a dozer onto an over the road transport trailer. Employee did not wish to seek medical attention at that time. On September 1, 2020 the employee asked to be medically evaluated because back still hurt. Employee was placed on restricted work.

Operator was backing dozer over a rock out cropping, movement of dozer caused employee to suffer a neck strain.

Employee was grinding a metal plate with a hand grinder when he lost grip with his left hand and the grinder lacerated his left middle finger requiring medical attention.

Employee attempted to hold wear iron bolt in place with finger while loosening nut with impact gun. The bolt slipped down while spinning and cut his left index finger. Report required due to medical treatment consisting of five sutures.

Employee was unloading a hammer drill bit from the pick up when it slipped pinching his Rt index finger causing a laceration requiring medical treatment.

Worn seat in motor grader.

Employee was removing a nut from a 992 loader bucket wear plate using an air impact wrench and socket. The socket came off of the wrench striking the employee's left index finger tip causing approximately a quarter inch laceration.

EMPLOYEE PINCHED THUMB IN DOOR OF BLAST HOLE DRILL CAUSING LACERATION REQUIRING SUTURES TO CLOSE WOUND. EMPLOYEE RETURNED TO NEXT SCHEDULED SHIFT ON RESTRICTED DUTY.

EE WAS GRINDING WITH 9" HAND GRINDER. GRINDER CAUGHT AND JUMPED CAUSING GRINDING WHEEL TO STRIKE RIGHT KNEE. RESULTING LACERATION REQUIRED 3 SUTURES TO CLOSE.

EMPLOYEE WAS CHANGING DRILL BIT ON BLASTHOLE DRILL AND AS HE ROTATED DRILL STEEL THE HANDLE OF THE BREAKOUT WRENCH STRUCK HIM ON TEH FOOT BREAKING HIS 2 SMALLEST TOES.

EE WAS WORKING TO REMOVE A CONVEYOR BELT PULLEY AND AS THE PULLEY WAS HOISTED FROM THE BELT THE HOIST STRAP CAUGHT ON THE FRAMEWORK. EE REACHED TO FREE THE STRAP AND AS HE PULLED IT FREE THE L OAD SHIFTED AND HIS HAND WAS CAUGHT BETWEEN THE STRAP AND FRAME. XRAYS SHOWED A BROKEN BONE IN HIS RIGHT HAND NEEDING A CAST AND LIGHT DUTY 10-12 WEEKS.

EE WAS HOLDING A BOLT HEAD INTO ITS HOLE WHILE ANOTHER EE TURNED THE NUT WITH A AIR WRENCH. THE BOLT HEAD SPUN AN A BURR ON IT CUT THROUGHT THE EE GLOVE AND LACERATED THEPALM OF HIS HAND MEDIC AL TREATMENT REQUIRED 9 SUTURES TO CLOSE THE WOUND.

WHILE CUTTING A PIVOT PIN FROM A LOADER BUCKET A PIECE OF MOLTEN SLAG BLEW INTO EMPLOYEE'S EAR BURNING THE INSIDE OF HIS LEFT EAR. EMPLOYEE DID NOT REPORT INJURY UNTIL 11-11-96 AT WHICH TIME T HE BURN HAD BECOME INFECTED REQUIRING MEDICAL TREATMENT.

WHILE GRINDING, A PIECE OF METAL BLEW INTO THE RIGHT EYE.

EMPLOYEE WAS LOOKING IN HOLE AND GOT CAUGHT ON ROTATING DRILL STEEL.

EE WAS PERFORMING CLEANUP, USING THE BACKHOE, WHILE HAMLING DIRT DOWN ROAD. HE WNET OVER ROUGH AREA CAUSING HIM TO BE JARRED UP AND DOWN SEVERAL TIMES IN EQUIPMENT SEAT, THIS BOUNCING CAUSED H IS SPINAL COLUMN TO BE SPRAINED.

INJURED WAS WORKING ON A CONE CRUSHER REBUILD.THE CRANE WAS LOWERING THE BOWL OVER THE BOWL LINER.ANOTHER EMPLOYEE SIGNALLED THE CRANE TO SWING LEFT.HE HAS THE BOWL STARTED TO SWING,INJURED RE ACHED UP AND GRABBED THE BOWL AS IT WAS SWINGING.HIS INDEX AND MIDDLE FINGER WAS SMASHED BETWEEN THE BOWL AND LINER.

EMPLOYEE WAS CUTTING OFF A BATTERY STRRAHND ON EQUIPMENT #M123 WITH CUTTIANG TORCH & IN DOING SO STARTED A SMALL FIRE HE GRABBED A GLASS OF WATER & PUT FIRE OUT ON RETURNING THE GLASS HE UNCRO SSE H IS ARMS & IN DOING SO HE PASSED THE CUTTING TORCH OVER H S RT HAND CAUSING 2ND DEGREE BURN BETWEEN HIS THUMB & INDEX FINGER

WHILE AIR HAMMING REFACTORY OUT OF BAKER FURNACE A PARTICLE OF REFACTORY WAS BLOWN UP PAST THE FULL FACE SHIELD AND SFTEY GLASSES INTO THE RIGHT EYE.

EMP WAS USING GRINDING WHEEL AND PC OF STEL WENT INTO EYE

EMPL WAS REPAIRING SCREEN DISC USING AIR ARC TO REMOVE OLD METAL & PIECE OF SLAG BLEW INTO HIS LEFT EAR.

EMPLOYEE WAS DRILLING AND SUB FELL ON HIS FINGERS.

THE EMP ALLEGED3THAT WHILE DOING FORCE ACCOUNT WORK FOR OUR CLIENT HE CUT HIS RT FOREARM WHILE GRINDING A METAL PANEL. THE GRINDER WAS SUPPLIED BY AN EMP OF THE CLIENT AND IT SLIPPED OUT OF E EMP HAND. THE 43IN GRINDER DID NOT HAVE A GUARD AROUND THE DISC, IT HAD A TRIGGER LOCK. EMP SUFFERED A 1 IN CUT ON RT FOREARM REQUIRING 6 STITCHES

EYES ARC/BURN 3

INJURED WAS COM3NG OUT FROM UNDER JAW CRUSHER WHEN BIG ROCK CAME OVER TOP AND HIT HIS TOE.

AS EMPLOYEE WAS3GUIDING CRUCIBLE BEING LIFTED OUT OF THE FURNACE THE SLING SLIPPED AND THE CRUCIBLE SWUNG SIDEWAYS CATCHING THE EMPLOYEES ARM AGAINST THE FURNACE WALL

WHILE OPERATING3VIBRATORY ROLLER ON STEEP ROADWAY SOMETHING BROKE INSIDE OF ROLLER CAUSING IT OTGO INTO DITCH BEFORE OPERATOR COULD STOP

DRILLERS WERE M2VING AIR TRACK DRIL OUT OF RANGE OF BLAST TO BE SET OFF LOOSE GRAVEL UNDERFOOT DRILLER FELL AND AIR TRACK WALKED HIS FOOT 2 BROKEN BONES AND BRUISES