Buscar en el registro

While assisting welder felt irritation right eye at 11 a.m. informed supervisor at 2p.m. break as redness increased. Seen by nurse practitioner at Dr seen by Dr. to remove foreign matter from right eye.

While the employee was trying to cut a hydraulic hose with a die grinder that had a disc blade on it, he cut his finger.

The employee stated he was unhooking a hose from #42 overflow pump and was sprayed in the face with caustic.

The employee stated he was closing a vent valve on #7 heater and pressurized liquid came out of the valve spraying caustic in his eyes and on his body.

The employee stated he was buffing a pump housing and some foreign metal flew in his eye.

THE EMPLOYEE WAS OPENING A CONDENSATE VALVE AND HOT WATER SPLASHED ON HIM. THE VALVE WAS LOCATED ON THE BACK OF PROCESS HEATER.

The employee was using a scaling gun overhead and felt a sharp pain in his left bicep muscle. This injury worsened and the company doctor gave the employee five days off. This injury is now an LTA (as of 9-21-05).

EE WAS USING WATER HOSE TO WASH DOWN AREA WHEN CAUSTIC LIQUID MATERIAL SPLASHED ONTO HIS PANT LEG JUST ABOVE BOOT AREA. EE WASHED AFFECTED AREA & APPLIED NEOSPORENE. HE SAID HE WAS OKAY & CONTINUED WORKING. ON 8/22 HIS LEG WAS BURNING. WENT TO MED. CLINIC & DOCTOR INDICATED CAUSTIC BURNS ON LEFT LEG. MED. TREATMENT: BURN TREATMENT THERAPY FOR NEXT 7-10 DAYS.

The employee was using a scaling gun and smashed his finger with the gun.

EE WAS DOING SOME SCALING WITH A HAND HELD SCALING GUN. WHILE EE WAS DOING THIS JOB, A LARGE PIECE OF SCALE WEIGHING ABOUT 15-20 LBS FELL ON EE LEFT THUMB CAUSING A FRACTURE

EE WAS GRINDING ON PUMP HOUSING. EE WAS WEARING ALL P.P.E. REQUIRED FOR THIS TASK. A SMALL PIECE OF DEBRIS GOT IN EMPLOYEE'S LEFT EYE BY UNKNOWN MEANS.

EE WAS TRYING TO REMOVE SHAVINGS FROM A LATHE WITH HIS HANDS WHEN SHAVING WENT THROUGH COTTON GLOVE AND LACERATED RIGHT INDEX FINGER.

WHILE RODDING #2 MILL EE GOT HIS FINGER CAUGHT BETWEEN ROD AND MAN OPENING CAUSING INJURY.

EE STATES SCALING #3 PUMP IN 340. AIR LINE HAD CAUSTIC IN IT AND BLEW ONTO RIGHT KNEE. AIR WAS COMING FROM EXHAUST PORT ON SCALING GUN.

EMPLOYEE STATES HE WAS REMOVING A REGRIND VALVE WITH A GO-DEVIL WHEN VALVE SLIPPED AND JAMMED HIS FINGERS BETWEEN WALL OF BUILDING. RIGHT HAND WAS ON HANDLE OF VALVE WHEN VALVE MOVED AND PINC HED RIGHT RING FINGER.

EE STATES HE WAS SANDING SHAFT ON LATHE. LATHE GRABBED RIGHT HAND GLOVE AND PULLED GLOVE INTO LATHE. EE WAS ABLE TO PULL HAND OUT OF GLOVE, RESULTING IN CONTUSION TO RIGHT HAND.

HE AND HIS WORK PARTNER WERE WELDING ON THE #1 PAN IN 350. HE WALKED AWAY WHILE PARTNER WAS WELDING. THE FLASHES IN THE AREA FROM LIGHT TO DARK ALL NIGHT CAUSED HIS EYES TO BURN SLIGHTLY.

EMPLOYEE STATES A PIECE OF SCALE FELL INTO THE LEFT EYE.

CHANGING BITS ON SCALING GUN AND STUCK SPRING PEN INTO RIGHT INDEX FINGER. RESULTED IN PUNCTURE.

EE WAS SCALING INSIDE DIGESTER USING A RIVET BUSTER WHEN A PIECE OF SCALE HIT HIS THUMB. OUR OFFICE WAS NOTIFIED ON 7/20/99 EE WENT TO E.R. FOR SWELLING TO HIS THUMB THE NIGHT BEFORE. (7/19/99 ).

EMPLOYEE WAS TIGHTENING BOLT WITH IMPACT 1/2" SOCKET CAME OFF AND IMPACTS SWIVEL HIT TIP OF MIDDLE FINGER LEFT HAND CAUSING LACERATION. EMPLOYEE WAS WEARING COTTON GLOVES.

EMPLOYEE HAD RIGHT HAND AROUND CHOKER WHILE SLACK WAS BEING TAKEN UP BY CARRY DECK CRANE. RIGHT INDEX FINGER BECAME CAUGHT BETWEEN THE CHOCKER AND VALVE BEING RAISED. THE EMPLOYEE SUSTAINED A PARTIAL AMPUTATION TO HIS RIGHT INDEX FINGER TIP

EE WAS AT THE TOP OF OUR CROW'S NEST ASSISTING HIS CREW RAISE METAL DECK BY AIR HOIST SYSTEM. THE EE WAS AT THE TOP SECTION OF CROW'S NEST (WHERE THE SNATCH BLOCK PULLEY IS LOCATED) PUSHING ON THE HOIST CABLE, WHEN HIS LEFT GLOVE HAND GOT CAUGHT BETWEEN THE CABLE & PULLEY. PARTIAL AMPUTATION TO HIS LEFT INDEX FINGER BELOW FINGER NAIL.

EE WAS USING A PORTABLE SUMP PUMP TO PUMP OFF 3 SUMP PIT. THE DISCHARGE SECTION BECAME PLUGGED EE TURNED OFF AIR TO THE PORTABLE SUMP AND WHEN OPENED THE DISCHARGE HOSE PROCESS LIQUOR SPLASHED OUT IN FACE. EE WAS NOT WEARING ALL REQUIRED PEE FOR THIS JOB AND FAILED TO DISCONNECT THE AIR HOSE AND OPEN AIR VALVE ON PROTABLE SUMP PUMP PRIOR TO DISCONNECTING DISCHARGE HOSE.

EMPLOYEE WAS WATER BLASTING THE #1 ROD MILL. WHILE STANDING ON THE EAST SIDE PLATFORM HE INADVERTENTLY HIT THE TRIGGER CAUSING THE NOZZLE TO SWING UP HITTING HIM IN THE FOREHEAD CAUSING HIM TO FALL BACK OVER THE HANDRAIL. THE PRESSURE ON THE WATER BLASTING GUN WAS APPROX. 7800 PSI. EMPLOYEE ACCIDENTALLY HIT THE TRIGGER WHEN UNPREPARED FOR THE START UP OF THE GUN PRESSURE.

EE WAS WORKING COMEALONG ON PRECIPITATOR AIR LIFT REMOVAL JOB. THIS AIRLIFT WAS ATTACHED TO A AIR TUG--WHILE LIFTING THE PRECIPITATOR UP THE WIRE ROP SLIPPED OUT OFF ITS CLAMPS AND HOOK. THE W EIGHT SHIFTED TO THE COMALONG WHICH CAUGHT THE HANDRAIL AND PULLED IT OVER ONTO THE EE 'S LEFT SIDE. THE EE SUSTAINED CONTUSIONS TO LEFT THIGH, SHOULDER & NECK.

EE WAS SCALING #29 PRECIPITATOR IN AREA 345 WHENA PIECE OF SCALE HIT HIS CHISEL ATTACHED TO THE SCALING GUN AND KICKED THE GUN UP STRIKING HIS CHIN. LACERATION TO HIS CHIN RESULTING IN STITC HES.

EMP ALLEGES WHILE STANDIGN BETWEEN #4 AND #6 PRESSES HE REMOVED HIS PPE(GLASSES) TO WIPE SWEAT FROM FACIAL AREA WHEN CAUSTIC SPLASHED INTO HIS RIGHT EYE. EYES WERE FLUSHED FOR APPROX 30 MIN TH EN EMP WAS TRANSPORTED TO HOSP FOR TREATMENT.

EMPLOYEE ALLEGES HE WAS RAISING AIR LIFT ON #14 PRECIPITATOR. STEAM WAS RISING IN HIS FACE SO HE STEPPED BACK AND REMOVED HIS GOGGLES TO WIPE FACE. FOREIGN BODY LODGED IN EYE.

EE CHIPPING HEAT EXCHANGER TUBES WITH CHIPPING GUN, FRAGMENTS FLEW & STUCK INTO CHEST. DAMAGE MINIMAL.

ALLEGES WHILE CRANKING 13 PRESS BACK WITH A CHETA PIPE, THE MOTOR TURNED ON CAUSING THE PIPE TO SWING AROUND AND STRIKE HIM IN THE KNEE.

STATES HE WAS SCALING IN OPERATIONS AREA AND CUT HIS LEFT HAND ON A PIECE OF MACHINERY.

EMPLOYEE WAS PREPARING TO DRAIN LIQUOR FROM THE UNIT PRESSURE FROM THE OPERATING PUMP SLAMMED THE SCREENBOX DOOR OPEN TO THE EXTENT OF SAFETY RETAINER CHAIN & HOT LIQUOR UNDER PRESSURE FROM TH E STILL OPERATING PUMP SPRAYED OUT OF THE PARTIALLY OPENED DOOR ONTO THE OPERATOR (ARMS & LEGS)

EMPLOYEE STATES HE WAS IN 330 AREA, OPENING DRAIN VLAVES TO EMPTY THE CONDENSATE WHEN PRESSURE IN THE EXCHANGER BLEW STEAM ONTO THE PAD & UP BOTH LEGS AND BOOTS.

EE STATES HE WAS IN 335 AREA CUTTING OUT BOLTS ON A SPRAY HEADER INSIDE FILTER PRESS WITH A CUTTING TORCH CO WORKER LOST CONTROL OF HIS END OF THE PIPE AND THE HOT END OF THE FALLING PIPE STRU CK EE RIGHT FOREARM.

EE STATES HE WAS DRILLING A HOLE IN A PIECE OF STEEL FLAT BAR WHEN THE DRILL SNAGGED THE BAR, TURNING THE VISE AND THUS JAMMING HIS LEFT HAND BETWEEN VISE AND DRILL COLUMN AND SLAMMED DOWN ON HIS LEFT 4TH FINGER.

54736YEE WAS WORKING N 350 AREA (COLD END) USING A PORTABLE SUMP PUMP TO REMOVE LIQUOR FROM THE SUMP PIT & PUMP IT INTO THE TOP OF THE WASH SLURRY TANK THE DISCHARGE HOSE WAS CRIMPED ALLOWING 79522URE TO BUILD UP AT WHICH TIME A LEAKD DEVELOPED IN THE DISCHARGE HOSE ALLOWING LIQUOR TO SPRAY TO BOTH EYES & FACE

EMPLOYEE WAS WELDING OVERHEAD WITH HIS HEAD TILTED TO ONE SIDE A PARTICLE FROM THE WELD BURN OFF FELL INTO HIS LEFT EYE BETWEEN SHIELD AND SAFETY GLASSES.

WHILE WORKING WITH LEAF HANDLING SCREW, EE HAD HOOKED THE CRANE BAR TO A STRIPPED FILTER LEAF AND WHILE THE CRANE OPERATOR WAS TRYING TO RELEASE THE LEAF FROM THE STRIPPING RACK TO PLACE IT IN A LEAF RACK, EE S HAND GOT JAMMED BETWEEN THE LAF AND THE RACK.

EMPL STATES HE WAS ATTEMPTING TO POSITION LOAD BLOCK ON BED OF CARRY DECK CRANE WHEN LOAD SLIPPED JAMMING FINGER BETWEEN BLOCK & BED OF CRANE.

CLEANING TOP OF STORAGE AREA WITH AIR HOSE LIME DUST BLEW IN R EYE

TORCH CUTTING ON LADDER HEAT FROM TORCH MAY HAVE FRACT A PORTION OF CONCRETE OR ASPAHLT JOINT EXPER DISCOMFORT TO L EYE EXACTLY WHEN FOREIGN BODY ENTERED HIS EYE

EMPLOYEE WAS T IGHTENING A BOLT & NUT ON A CONDENSATE PUMP BASE IN AREA 330 AFTER RIGHTENING THE BOLT & NUT HE RELEASED THE TRIGGER TO NO AVAIL THE AIR SUPPLY COULD NOT BE CUT OFF AT THE WRENC H DUE TO A FAULTY TRIGGER PIN WHICH CAUSED THE WRENCH TO MALFUNCTION RECOGNIZING THE IMMEDIATE PROBLEM HE JERKED THE WRENCH FROM THE NUT & IN DOING SO JAMMED HIS LEFT THUMB AGAINST THE PUMP B

CHECKING LEAK IN PRODUCT LINE OF NO 1 PRIMARY RAISED GLASSES FOR CLEARER VISION WHEN CAUSTIC SPRAYED INTO RIGHT EYE.

R EYE BOTHERING HIM AFTER GOT HOME GOT S ME TRASH TO EYE WHILE USING CHIPPING GUN

EE HAD INSERTED A 1 SOCKET DRIVE END OF A 3/4 AIR OPERATED WRENCH. HE THEN INSERTED A STEEL KEEPER PIN THRU THE HOLES DESIGNED TO KEEP THE SOCKET FROM SLIPPED OFF THE END OF THE WRENCH AND PUL LED A RETAINING 0 EINF OVER THE PIN INTO THE 0 R

EMPLOYEE WAS WORKING IN THE RODMILL, AREA 325, STANDING DOWN STAIRS NEAR #2 DIGESTION FEED PUMP, ATTEMPTING TO LOCATE A LEAK (LOOKING UP). WHEN HE LOOKED DOWN THE PUMP SPRAYED LIQUOR TOWARD HI M. HE MOVED QUICKLY AND IN ATTEMPTING TO KEEP FROM GETTING SLURRY ON HIM, HE SLIPPED AND TURNED HIS LEFT FOOT CAUSING PAIN. HE REPORTED THE INCIDENT TO HIS SUPERVISOR AND SAID HE COULD CONTIN

EMPLOYEE WAS DISGRINDING ON A VALVE DISC IN INSTRUMENT SHOP, WHEN SOME TRASH FLEW INTO HIS LEFT EYE.

INJURED EMPL & COWORKER HAD ATTACHED 2" DISCHARGE HOSE TO PORTABLE AIR DRIVEN SUMP PUMP TO PUMP LIQUOR FROM PAD AROUND NO 1 SUMP UNDER DIGESTERS. WHILE ATTEMPTING TO GET PORTABLE SUMP TO PUMP IT BEGAN PUMPING & QUICK CONNECTION BLEW OFF DISCHARGE CONNECTION STRAIGHT UP KNOCKING OFF EMPL'S SAFETY GOGGLES & HAT.

ADJUSTING SPRAY HEADER-HAD GLASSES & GOGGLES ON-HAD TO REMOVE THEM BECAUSE OF VISUAL DISTORTION AND PLUG ON BACK OF HEADER SPEWED,SPRAYING STRONG WASH TO RIGHT EYE.