Buscar en el registro

Employees were changing 8'x 24'screen. The counter weight was being heated and employee stepped forward to give instruction when the counter weight came loose and struck employee in the right leg.

Employee was drilling a hole in conveyor belts to be used on a screen. The drill bit bound up while drilling and caused the drill to twist suddenly injuring the employee's wrist. Employee did not report the injury until 07/16/2019.

Employee strained his back due to being bent over while welding.

While doing repair work on a conveyor, the cutting torch slipped from the worker's hand. The torch landed on top of his work boot and burned him.

Worker was cutton on an uneven surface, he slipped and the torch crossed over his gloved hand and as a result he received a burn to his hand.

OPERATING HAMMER DRILL, DRILLING ON A CONCRETE CULBERT, EE WAS IN A SIDE WAYS POSITION WHEN HE FELT A SHARP PAIN IN HIS RIGHT GROIN AREA AS WELLAS HIS BACK ON THE RIGHT SIDE.

NEW HOPPER WAS BEING MADE, DURING THE FITTING PROCESS, A TACK BROKE CAUSING A PLATE OF 1/4" STEEL TO RELEASE AND FALL ONTO HIS FOOT BY THE ARCH AREA.

THE EMPLOYEE PUT HIS HAND ON THE CABLE OF THE CRANE TO GUIDE THE LIFTING BLOCK. THE CRANE OPERATOR WAS RAISING THE LOAD LINE WHEN EMPLOYEE'S FINGER WAS CAUGHT IN A PINCH POINT.

THE EE WAS GRINDING WITH EYE PROTECTION GOGGLES AND FELT DUST GRINDINGS FILTER THROUGH THE GOGGLES.

AFTER MAKING A BEAD OF WELD, THE EE LIFTED WELDING HOOD AND TOOK A CHIPPING HAMMER IN HIS LEFT HAND AND STARTED TO CLEAN THE FLUX OFF THE BEAD. THIS ACTION CAUSED A PIECE OF FLUX TO PROJECT TO THE LEFT EYE LID.

STANDING BY ANOTHER EE, EE FELT A FRAGMENT ENTER INTO HIS EYE.

AFTER SAFETY PINS WERE PULLED THE EE WALKED BETWEEN THE CHUTE AND SCREEN. OTHER EE MOVED CHUTE TOW AND SCREEN CATCHING EE BETWEEN CHUTE AND SCREEN.

THE EE WAS GRINDING METAL FOR WELDING AND A PARTICLE FLEW UNDERNEATH HIS SAFETY GLASSES AND HIT HIS LEFT EYE.

AS THE EE WAS MOVING THE JOY STICK, HE FELT PAIN IN HIS RIGHT WRIST.

ROCK WAS STUCK IN BAXTER JAW. EMP WAS ON CATWALKABOVE JAW NEXT TO RAILING. ROCK WAS BOUNCING IN JAW. THAT CAUSED THE RAILING TO SHAKE AND HIT HIS LEFT CHIN.

EE HAD JUST DISCONNECTED THE ELECTRICITY TO THE BAG HOUSE AUGER. THE AUGER DID NOT COME TO A COMPLETE STOP BEFORE HE PUT HIS HAND INSIDE.

BRUSHING A WELD INSIDE BOX. HEAD AND SHIELD WERE INSIDE BOX AND A BIT OF TRASH BLEW BEHIND SHIELD.

1ST SHIFT WHILE GRINDING GOT METAL IN RIGHT EYE

WORKER WAS GRINDING. WHEN THE GRINDING WHEEL HIT A HOLE IT KICKED BACK STRIKING WORKER IN THE NOSE.

AS THE EE WAS REMOVING THE DOOR FROM THE CRUSHER THERE WAS EXCESS DIRT TRAPPED ON THE OTHER SIDE CAUSING THE DOOR TO FALL ON TOP OF HIM.

THE EMPLOYEE WAS USING A AIR ARC TO CUT THE MANTEL LINER OFF THE 6614 CRUSHER. AS HE WAS CUTTING THE NORDBAK BECAME A LIQUID AND AIR FROM THE AIR ARC FORMED A BUBBLE. AFTER THE EMPLOYEE QUIT C UTTING AND LIFTED HIS WELDING HOOD TO CHECK HIS WORK THE NORDBAK STARTED TO COOL CAUSING THE BUBBLE TO BREAK AND SPLASHED INTO HIS FACE.

HE WAS GRINDING AND THE GRINDER KICKED BACK ON HIM AND HIS CHIN HIT THE GRINDER.

85081D JUST COMPLETED CLEANING OUT JAW ON CRUSHER. A ROCK FLEW OUT OF THE JAW AS HE WAS WALKING ON THE CAT WALK AND HIT HIM IN THE ELBOW.

EMPLOYEE WAS OPERATING A KOMATSU DOZER IN A TIGHT ROCKY AREA CONTINUOUS TWISTING AS HE WAS BACKING UP IN THE DOZER & WORKING ON A ROCKY SURFACE CAUSED HIM TO STRAIN HIS BACK

EMPLOYEE WAS MAKING REPAIRS ON A CONVEYOR WHILE USING A GRINDER ON THE GYRO CONVEYOR A PIECE OF SLAG FELL INTO HIS EYE

HE WAS REMOVING A SOCKET FROM A 66" GYRO DISC CRUSHER USING A ONE INCH AIR IMPACT WRENCH. THE WRENCH SLIPPED FROM HIS HAND, AS HE GRABBED FOR IT, HIS HAND WAS CAUGHT BETWEEN THE SIDE OF THE CR USHER AND THE WRENCH.

HE WAS REMOVING THE SHEAVE FROM A BARMAC USING AN AIR IMPACT WRENCH TO REMOVE THE BOLTS WHICH HELD THE SHEAVE IN PLACE. WHEN THE BOLTS WERE LOOSE, THE SHEAVE FELL AND HIS HAND WAS CRUSHED BETW EEN THE FRAME OF THE BARMAC AND THE SHEAVE. THE INJURY RESULTED IN A CONTUSION TO THE LEFT HAND.

WORKING ON DOZER PC OF METAL SHEARED OFF ENTERED THIGH

HE WAS ADJUSTING IDLE ROLLER ON IMPACTOR WHEN ROCK CAME OUT OF IMPACTOR & HIT RIGHT LEG.