Buscar en el registro

Employee was grinding without eye protection and got debris in right eye.

Employee and contractor were installing a bucket elevator when it came free. Employee was tossed to the side and the contractor had the bucket elevator collapse upon contractor. Employee was released from the hospital after a few hours, and the contractor was sent to a hospital in Albuquerque.

While lifting with a crane, an elevator belt snapped and injured a contractor and an employee.

Employee was working on the Secondary Screen grinding on its rails. Employee advised employee felt something land in eye, but did not think anything of it. Employee advised employee was wearing safety glasses. Employee continued to work from the date of incident (Friday) into Tuesday 10/12/21 before advising what had occurred and that the eye was irritating employee.

Motor being lifted by chainfall, motor came loose & chain tightened pinching employee's fingers. Tearing skin on middle & pinky fingers, stitches needed on pinky finger.

While using cutting torch, slag burnt through pants and fell into left booting burning left foot

EE WAS BLOWING OFF THE FORK LIFT AND SLIPPED, ACCIDENTALLY HITTING TRIGGER ON AIR HOSE. THE AIR HIT HIS LEFT EAR, CAUSING SOME PAIN AND DISCOMFORT. THE ROOF HAS A LEAK AND THERE WAS ICE IN THA T CORNER.

EMPLOYEE WAS CLEANING A PLUGGED CHUTE IN THE K SCREEN SPLITTER. THE EMPLOYEE REACHED INSIDE SPLITTER TO REMOVE ORE FROM PIPE. THE SPLITTER CAUGHT HIS COVERALL PULLING HIS HAND INSIDE AND CRUS HING HIS LEFT HAND.

EMPLOYEE WAS WELDING ON A TRACTOR IN THE SHOP WITHOUT GOOD VENTILATION AND THE SMOKE HURT HIS LUNGS.

EMPLOYEE WAS BAGGING 53 ORE FROM RAYMOND MILL WHEN PERLITE PARTICLE ENTERED RIGHT EYE. DID NOT SEEK MEDICAL ATTENTION UNTIL EVENING OF 4/25/00 AT E.R.

EE WAS WELDING PATCHES ON AIR DUCT, HE STATES THAT HE DID NOT SEE SHARP OBJECT IN DUCT. THIS SHARP OBJECT CAUSED A PUNCTURE WOUND TO HIS LEFT HAND. EE SOUGHT MEDICAL CARE ON 9-29-95, 9-30, 10- 1 SCHEDULED DAYS OFF.

EMPLOYEE STUCK HIS HAND IN A MOVING SEAL VALVE WHILE CHANGING PRODUCTS AT CLASSIFIER

EE HAD JUST COMPLETED WELDING, HE HAD RAISED HIS WELDING HOOD WHEN A PARTICLE FELL IN HIS EYE. RUST RING--PRESCRIPTION USED IN OFFICE--NO RX GIVEN.

EMPLOYEE WAS REMOVING PLASTIC FROM ROLLERS ON STRETCH WRAP MACHINE HE BUMPED BAR & MACHINE STARTED MACHINE PULLELD FINGERS BETWEEN ROLLERS LEFT HAND & FINGERS WERE BRUISED

EE WAS HOISTING SCREEN PARTS TO SCREENDECK, HE WAS USING A TOW CABLE AND CHAIN, THE CABLE ON WINCH CUT AND BRUISED HIS SMALL FINGER.

EMPLOYEE WAS TRYING TO DETERMINE WHERE CHUTE WAS LEAKING. PERLITE THAT WAS LEAKING FROM CHUTE BLEW INTO HIS EYE. NO FOREIGN PARTICLE FOUND, INFLAMMATION OF UPPER EYELID, PRESCRIPTION MEDICINE WAS USED.

EE WAS CHIPPING AT WELD A PIECE OF SLAG WENT UNDER HIS SAFETY GLASSES INTO HIS EYE. CORNEAL ABRASION EE WAS WEARING SAFETY GLASSES 3-27, 3-28, AND 3-29 SCHEDULDED DAYS OFF.

EMPLOYEE WAS ADJUSTING STRETCH WRAP MACHINE. WRAP CAUGHT FINGER AND PULLED IT INTO ROLLS, CAUSING INJURY TO HIS RIGHT INDEX FINGER. FLESH WAS PULLED BACK FROM TIP OF FINGER.

EMPLOYEE WAS WELDING A PIECE OF METAL SLAG CHIPPED OF METAL & GOT INTO HIS EYE FILED LATE DUE TO CONFUSION OF EYE TREATMENT

EMPLOYEE WAS WORKING NEAR ANOTHER MECHANIC THAT WAS WELDING NEAR HIM,EMPLOYEE ACCIDENTALLY LOOKED AT WELDING ARC.FEBRUARY 29 AND MARCH 1 WERE HIS SCHEDULED DAYS OFF.

EE WAS PERFORMING A WELDING JOB, HE CLAIMS THAT A PIECE OF PERLITE MUST OF BEEN STRUCK TO HIS EYE OR EYE BROW. ALLEGED PERLITE PARTICLE THAN ENTERED HIS EYE.

WORKING ON 00-000 PUMPING SYSTEM WHEN CAP ON LINE BLEW OFF HITTING EMPL ABOVE LEFT EYE.

EE WAS PERFORMING METAL FABRICATION CUTTING TORCH LEAKED AT HEAD AND BURNED RIGHT LEG.

EMPLOYEE WAS PUTTING BUCKETS ON ELEVATOR USING IMPACT WRENCH PIECE OF RUST CHIPPED OFF BUCKET

EMPL WALKING TO WORKPLACE.TRACTOR RAN OVER A BOARD,IT SPRANG UP AND HIT HIM ON LEG.BRUISE ON LOWER LEFT LEG.

EMPLOYEE WAS WALKING THRU SHOP PAST GRINDER. A PIECE OF SLAG FLEW FROM GRINDER PAST AND BEHIND SAFETY GLASSES INTO LEFT EYE.

EMPLOYEE TOOK A DANGEROUS POSITION. BRAKE ON CRANE HOIST SLIPPED WITH WEIGHT OF TANK AS THE TIE WAS BEING PUT INTO PLACE. CRANE WAS SETTING A TANK ON CROSS TIES. EMPLOYEE PLACED HAND IN A DAN GER AREA AND LEFT HAND WAS MASHED.

EMPL USING CUTTING TORCH WHEN CUFF OF GLOVE CAUGHT ON CUTTING TIP AND BURNED ARM.

CONJUNCTIVITIS PRESCRIPTION PRESCRIBED.EMPLOYEE WAS PACKING DICAPERL FUGITIVE DUST FROM PACKER BLEW INTO EYE.

EMPL WAS USING GRINDER & GOT SOMETHING IN RIGHT EYE. EMPL WAS WEARING SAFETY GLASSES.

OPERATING IMPAC7 WRENCH, EXHAUST AIR BLEW PIECE OF STEEL IN LEFT EYE.

EMPLOYEE WAS TE8TING TO DETERMINE IF WELDING MACHINE WAS WORKING.WELDER WAS NOT WORKING,HE WAS CHECKING CONNECTIONS TO WELDER.FLASH BURN IN BOTH EYES FROM WELDING ARC.

EMPLOYEE WAS CH5NGING UNIT #2 MILL ROTOR. HE WAS TAKING DOWN PIPE BETWEEN MILL CASE AND BLOWER CASE, HOIST SLIPPED CAUSING PIPE TO FALL ON HIS RIGHT FOOT.

EE WAS POLYWRAP1ING PREVIOUS PALLET ON CONVEYOR WHEN PALLETIZER MALFUNCTIONED & EJECTED PALLET IN HOLE PREMATURELY & C AUGHT HIS RIGHT LEG.

EMPL WELDING PA7CH ON FMC SCREEN.

EMP WAS CUTTING3ANGLE IRON FOR BRACING PLATE HOOK WAS NOT GRIPPING AND IT SLIPPED OFF CAUSING INJURY TO RIGHT WRIST

DUST PARTICLES IN THE AIR PERLITE PARTICLE IN LEFT EYE

EMP WAS OPERATING #4 FURNACE. AIR BORNE PARTICLES. PERLITE PARTICLE GOT IN LEFT HIS LEFT EYE