Buscar en el registro

Employee was putting a new bolter steel on and pinched EE's left finger.

While repairing a broken bracket on air door, employee was using a grinder and welder. At some point in the evening the employee thought EE had some dust in EE's right eye and reported it to EE's supervisor, who took EE into the doctor. The doctor at ER removed foreign object.

While tramming the mucker (L-35) the brakes set up. This caused his head to slam into front window causing his glasses to push into his eyebrow. It cut his eyebrow and required 4 stitches.

Miner removing a reamer bit from the cubex; had his hand on the bit reached up to the controls to release the bit. Pulled the wrong lever and the brakeout tool slid forward, instead of the bit being released.

Removing jammed bolt from bolter when the bolt plate slid down the bolt striking his right hand requiring sutures.

Driller was adding drill rod. Top of rod contacted sheav wheel and dropped back on hand. Finger pinched against feed frame of drill.

While checking for a hydraulic leak, the employee put his hand in the path of the moving boom, hitting his hand fracturing finger.

While spraying shotcrete, cement entered boots and burned feet.

The employee was tightening a bolt with an impact wrench when the pin holding the socket came loose and hit his hand requiring two sutures.

The employee was tightening a bolt with an impact wrench, when the pin holding the socket came loose and hit his hand requiring two sutures.

Removing slide on rock bolter with impact wrench. Retainer on slide spun hitting left index finger cut it.

MINER WAS DRIVING A BEAM HOLE RAISE, ON A STEEL LADDER AND WORKING FROM A 2' X 2' DRILL DECK. AS JACKLEG CAME DOWN FROM A HOLE IT CAME INTO CONTACT WITH LEFT INDEX FINGER ON THE LADDER RUNG.

EE WAS ROCKBOLTING AND A PIECE OF MATERIAL GOT IN HIS EYE.

WORKER WAS BOLTING IN THE PRIMARY SUMP WITH THE JACKLEG DRILL. PUT A 6' SPLIT BOLT W/MONSTER MAT BY HAND. BEFORE WORKER COULD GET UNDER IT WITH JACKLEG, BOLT FELL OUT AND MONSTER MAT PLATE CUT THROUGH HIS BOOT AND INTO HIS SHIN.

A MINER BACKED A REMOTE MUCKER INTO HIMSELF AND BECAME TRAPPED UNTIL A RESCUE CREW COULD FREE HIM (APPROX 30 MIN).

EE WAS BOLTING IN CSDI. WHEN PULLING HIS MACHINEOUT OF HOLE HE LOST HIS BALANCE HE TURNED TO STEP BACK AND HIS FOOT WAS BETWEEN ROCKS & DIDNT TURN WITH HIS BODY. HE SPRAINED HIS KNEE. IT WAS DIFFICULT TO WALK & HE WENT TO DR HIS KNEE HAD SOME SWELLING HE WAS PUT IN A BRACE

WHILE EE WAS INSTALLING A SPLIT SET. BOLT IN THE BOTTOM ROW OF THE WIRE ON THE RIGHT RIB, SOME MATERIAL STRUCK HIM ACCROSS HIS LOWER BACK.

EE WAS ROCKBOLTING IN THE 5860. AND WAS DRIVING A SPLIT SET BOLT WHEN A STEEL SLIVER FROM EITHER THE DRIVER OR THE BOLT DISLODGE, HITTING EE IN THE EYE.

EMPLOYEE WAS ROCKBOLTING WHE THE STEEL JUMPED OUT OF THE STEEL FENDER AND CAME DOWN, HITTING HIS RIGHT HAND BETWEEN THE INDEX FINGER AND THUMB WHICH WAS RESTING ON THE HANDLE OF THE MACHINE. I T PUT A SMALL CUT ON HIS HAND REQUIRING 4 OR 5 STITCHES.

EE LIFTED HIS JACKLEG OUT OF THE MUD IT WAS STUCK IN & PULLED A MUSCLE IN HIS BACK.

EE WAS BOLTING IN THE 5985 SWCI WHEN A PIECE OF ROCK FELL FROM THE BACK, STRIKING EE ON THE HARD HAT.

EE WAS ROCKBOLTING WHEN SOME GROUND FELL FROM THE BACK. WHEN THE GROUND FELL IT PULLED THE HAMMER OUT OF HIS HANDS, KICKING THE LEG LOOSE. WHEN THE LEG CAME LOOSE IT SHOT TO FULL EXTENSION AND THE STINGER ON THE CROWS FOOT HIT HIM ON THE SIDE OF THE SHINE BONE.

EMP WAS RUNNING A JACKLEG WHEN IT LUNGED FORWARD PUTTING A STRAIN ON RIGHT SHOULDER. THERE WAS A SIIS-C1 FROM FILLED OUT AT TIME OF ACCIDENT BUTEMP DID NOT HAVE A DR LOOK AT IT UNTIL 12-19-96. HE WAS PRESCRIBED AND ANTI INFALAMATORY MEDICINE

EE WAS ROCKBOLTING IN THE 5880 LEVEL, HE STOOPEDOVER TO PICK SOMETHING UP. WHEN HE DID A SMALL, SHARP ROCK CAME THROUGH THE 2 X 2 WIRE MESH, AS THE ROCK GRAZED HIM THE SHARP EDGE OF THE ROCK CUT THE SIDE OF HIS NECK REQUIRING SOME STITCHES

EMPLOYEE WAS DRILLING A HOLE IN THE BACK FOR A ROCK BOLT. AS THE HOLE WAS DRILLED SOME ROCKS RATTLED LOOSE AT THE COLLAR AND FELL STRIKING THE EMPLOYEE ON HIS CHIN AND RIGHT FOREARM. EMPLOYEE RECEIVED STITCHES FOR THE CHIN LACERATION AND FOREARM LACERATION AND RETURNED TO WORK THAT SAME SHIFT.

EMPLOYEE WAS ROCK BOLTING AS HE LOOKED UP A SMALL ROCK FELL THROUGH THE WIRE MESH,HITTING HIM IN THE EYE.

EMPLOYEES WERE SETTING UP THE SCISSOR TRUCK TO START ROCKBOLTING.INJURED WAS STANDING TO THE SIDE OF THE TRUCK TO PUT THE JACKS DOWN WHEN SOME MATERIAL CAME OFF FROM THE RIB,KNOCKING HIM INTO THE SCISSOR TRUCK.

INJURED AND ANOTHER EMPLOYEE WERE ROCK BOLTING A HEADING.THE 1" AIR HOSE BLEW APART AT A MENDER.AS THE HOSE WHIPPED AROUND,IT FLIPPED A ROCK APPROX 20' TO 30' AND HIT INJURED IN THE RIGHT EYE.

DRILLER ASSISTANT'S GLOVE SNAGGED IN CHAIN PULLING FINGER IN BETWEEN CHAIN AND PULLEY ON DRILL. CUT FINGER.

INJURED WAS DRILLING A ROUND ON A TURN. AS HE MOVED THE BOOM OVER TO THE RIGHT TO LINE UP ON A HOLE, THE BOOM LAYED OVER SMASHING HIS FINGER.

AS EMPLOYEE WAS TIGHTENING A SPLIT SET ROCK BOLT SOME SMALL ROCKS CHIPPED OFF FROM UNDER THE PLATE ONE OF THE FALLING ROCKS STRUCK THE EMPLOYEE & CUT HIS UPPER LIP EMPLOYEE RECEIVED 3 STITCHES TO CLOSE THE WOUND

EE WAS ROCK BOLING THE BACK. HE HAD INSTALLED A MAT WITH ONE ROCK BOLT. AS HE WAS COLLARING THE HOLE FOR THE SECOND BOLT, A SOFTBALL SIZE ROCK FELL FROM THE BACK AND STRUCK HIM NEAR THE ELBOW OF HIS OUTSTRETCHED ARM.

EE WAS DRILLING WITH THE JACKLEG. HE GOT HIS THUMB BETWEEN THE LEG AND THE STOP ON THE HAMMER, SPLITTING HIS THUMB OPEN.

EE WAS ROCK BOLTING IN A STOPE A SMALL PIECE OF SULFICE ORE GOT IN HIS EYE.