Buscar en el registro

Semi bulk packaging unit pinched the operators foot as EE attempted to unplug the bag spout.

Maintenance Tech was completing work order to install safety chain on railing when cutting a chain with a grinder. Grinding wheel began to fail and pushed the tool into the workers ungloved thumb.

Employee was using a hand grinder to cut off the inner race of a bearing that had seized on a fan shaft. The grinder kicked back and cut the left hand that was resting on the fan shaft. The employee's hand was cut just below the thumb knuckle, cutting one tendon and nicking another tendon.

While operating a dozer the track slid on a boulder causing the operator to hit the left side window of the cab.

While welding and grinding on the grizzly a piece of slag got in employee's right eye. His eye did not bother him until 05/10/2005. He went to doctor and had slag removed.

WHILE LIFTING SPARE PUMP FROM YARD CAUGHT FINGERS BETWEEN CHAIN AND PUMP.

GRINDING ON WELD ON HAND RAIL WHEN FOREIGH OBJECT ENTERED EYE. EYELASSES & GOGGLES WERE ON AT THE TIME

GRINDING ON A METAL PLATE THAT WAS JUST CUT, IN A BENT OVER POSITION.,

THIS INJURY WAS FIRST REPORTED TO EH&S DEPT ON 12-30-96. WHILE PULLING CUTTING ARM BACK ON STRETCH WRAP EQUIPMENT, THE EXTENSON ARM RETRACTED AND INCHED MIDDLE FINGER ON LEFT HAD. T HIS RESUL TED IN A BREAK OR TEAR TO TISSUE. EMPLOYEE CONTINUED TO WORKTHIS HSIFT AND OTHERS. ON 12-26-96 THE EMPLOYEE WENT TO DR BECAUSE OF INFECTION.

WHILE WORKING NEAR THE PUMP STATION, A PVC PIPE BROKE LOOSE WHEN THE PUMP WAS ENERGIZED. THE PIPW FELL TO THE GROUND, HIT THE PUMP, BOUNCED UP AND HIT EE IN THE FACE. EE WORKED TO THE END OF T HE SHIFT (700 AM), THEN WENT TO THE DENTIST FOR AN EXAMINATION. THE BLOW TO THE FACE RESULTED IN TWO CRACKED TEETH.

EE WAS GUIDING A VIBRATOR MOTOR DRIVE INTO PLACE ONE OF THE CABLES BEING USED TO GUIDE DRIVE SLIPPED AND ASSEMBLY SWUNG AND STRUCK RIGHT KNEE AFTER 4 DAYS EE COMPLAINED OF PAIN IN LEFT KNEE AL EDGING IT WAS HURT IN ACCIDENT.

EMPL WAS WORKING IN JET MILL AREA & BAG EXPLODED IN FACE. EMPL WAS WEARING SAFETY GLASSES. INJ IS BEWING ATTRIBUTED TO FAULTY BAG.

STANDING ON A PLANK WELDING.ALL MACHINERY WAS RUNNING AND VIBRATED THE PLANK.

BAG PUSHOFF ON THE LEFT HAND PACKER ON #2 JM WAS HANGING UP IN THE OUT POSITION THE EMPLOYEE HIT IT WITH HIS HAND TO PUSH ITS BACK & HIS FINGER GOT CAUGHT BETWEEN THE PUSHOFF & THE PACKER FRAM E

EMPLOYEE WAS OPERATING A LIEBHERR SHOVEL AND THE DIGGING WAS VERY HARD, SUFFERING A NECK INJURED IN THE PROCESS.

EMP WAS LOADING PACKOUT STRETCH MACHINE HE PUT A NEW ROLL OF FILM ON WHILE THE MACHINE WAS RUNNING AND CAUGHT HIS LEG BETWEEN THE MOVING TABLE AND A STATIONARY ROLLER.

EMPLOYEE WAS US3NG HAND DRILL AND HOLD SAW TO CUT OUT 4" DIAMETER HOLE IN MCC DOOR.PILOT BIT SLIPPED OUT OF CENTER HOLE BEFORE IT WAS THROUGH CAUSING HOLE SAW TO SLIDE ACROSS FINGERS.

EMPLOYEE WAS FEEDING BOULDERS INTO GRIZZLY BOULDERS BECAME BRIDGED ATTEMPTED TO FREE BY HAND BOULDER SLIPPED CRUSHING FINGER ON RT HAND

EMPLOYEE WAS WORKING WITH ANOTHER EMPLOYEE RUNNING ROCKS THRU CRUSHER FEEDER EMPLOYEE ATTEMPTED TO TURN ROCK BY HAND SO IT WOULD GO THRU GRIZZLYROCK TWISTED CRUSHING FINGER BETWEEN FEEDER SIDE AND ROCK

EMP WAS SHARPENING THE BUTTONS ON A 6 1/2 DOWNHOLE DRILL BIT HE WAS USING A HAND HELD DRILL SHARPENER AND WAS ONLY WEARING SAFETY GLASSES THE GRINDING STONE FLEW APART AND A PIECE OF STONE WEN UNDER HIS GLASSES STRIKING HIM IN THE RT EYE DR REMOVED IMBEDDED OBJECT

INJ EMP WAS STANDING ON TOP OF GRIZZLY BARS JACKHAMMERING A JAMMED BOULDER THE ROCK BROKE FREE UNEXPECTEDLY CAUSING EMP TO LOOSE HIS BALANCE TWISTING BOTH ANKLES EMP DID N OT FALL

EMPLOYEE REACHED ARM UP TO STRAINGHTEN OUT FIBER PALLETT IN AUTOMATIC PALLETIZER, THE STRIPPER CAME OPEN AND CAUGHT HIS RIGHT HAND.