Buscar en el registro

EE WAS PINNING TOP WHEN A PIECE OF STEEL HIT RIGHT THUMB.

STRUCK BY DRAW ROCK WHICH FELL BETWEEN ROOF BOLTS. NOTE: EMPLOYEE HAS BEEN ABSENT FOR BOTH HEALTH AND ACCIDENT/INJURY REASONS. SINCE 9/24 ABSENTDUE TO INJURY.

EE WAS OPERATING THE CONTINUOUS MINER, WHEN HE WAS STRUCK BY FALLING DRAWROCK, RESULTING IN PAIN TO HIS HEAD AND LEFT SHOULDER.

WHILE OPERATING ROOF BOLTING MACHINE, THE EMPLOYEES GLOVE BECAME CAUGHT BY DRILL STEEL. THE EMPLOYEE'S RIGHT THUMB WAS FRACTURED.

EE WAS USING A CHAIN SAW TO CUT A TIMBER. A PIECE OF DRAWROCK FELL & STRUK EE ON THE REAR OF THEHEAD THE ROCK STRUCK HARD CAP

EE FELL TO MINE FLOOR WHEN HIS FEET WERE PULLED FROM UNDERNEATH HIM BY THE CONTINUOUS MINER TRAILING CABLE.

EMPLOYEE WAS LOWERING DRILL POT WITH HIS LEFT HAND ON THE SUPPORT FRAME. APPARENTLY THE DRILL POT PIVOTED AND PINCHED OFF THE END OF THE LEFT MIDDLE FINGER.

EE STATED WHILE OPERATING ROOF BOLTING MACHING, HE EXPERIENCED BACK PAIN.

DRAWROCK FELL DOWN DRILL STEEL, BROKE AND CUT EMPLOYEE'S FOREHEAD.

THE EMPLOYEE STATED HIS GLOVE AND FINGER BECAME CAUGHT IN THE CONTINUOUS MINER TRAM CHAIN AS HE WAS HANDLING THE TRAILING CABLE.

EMPLOYEE WAS STRUCK IN RIGHT EYE BY FOREIGN OBJECT WHILE OPERATING A GASOLINE WEED EATER

EMPLOYEE WAS STRUCK IN CORNER OF LEFT EYE BY A FOREIGN OBJECT THROWN BY CONTINUOUS MINER RIPPER HEAD WHILE LOADING OUT GOB IN PREPARATION TO START LOADING & CUTTING

WHILE OPERATING A ROOF BOLTING MACHINE, THE EE LOWERED THE DRILL HEAD ONTO A BOLT AND HALF HEADER STADNING AGAINST THE RIB. THE BOLT STRUCK R. HAND.

WHILE OPERATJNG A ROOF BOLTING MACHINE, A PIECE OF DRAWROCK FELL STRIKING THE EE S L. INDEX FINGER./

EE WAS STRUCK BY A PIECE OF DRAWROCK WHILE OPERATING A ROOF BOLTING MACHINE.

WHILE INSTALLING ROOF BOLTS A PIECE OF DRAWROCK FELL AND STRUCK THE EE ON THE LEFT COLLARBONE.

EE WAS INSTALLING ROOF BOLTS. AS HE RAISED HIS STABILIZING JACK, LOWERING THE DISTANCE BETWEEN THE CANOPY AND HIS BACK, THE CANOPY STRUCK EE ACROSS BACK

THE EE WAS STRUCK ON HEAD AFTER HE LOWER HIS STABLIZING JACK. APPARENTLY HE DID NOT RAISE THE CANOPY HIGH ENOUGH INITIALLY.

NOTE; FIRST PHYSICIAN VISIT: 6-20-94. EE STATED HE BUMPED HIS RT KNEE AGAINST CONTINOUS MINER.

THE EE STATED THAT HE EXPERIENCED PAIN IN THE GROIN AND NUMBNESS IN HIS R LEG BECAUSE THE DOZER WAS TO ROUGH TO OPERATE IN THE STOCKPIILE HE STATED.

THE EE WAS TRAMMING THE ROOF BOLTING MACHINE AND STACK OF STRAPS USED FOR ROOF SUPPORT SLID OFF THE STORAGE AREA INTO THE OPERATING DECK STRIKING THE EE CAUSING HIM TO MOVE QUICKLY INJURY BACK .

HELPING ON A CONTINUOUS MINER A RIB ROLL OCCURRED AND DISLODGED A TIMBER WHICH FELL AND STRUCK EMPLOYEE ON LOW BACK.

EMPLOYEE WAS HELPING TO GET A DRILL STEEL OUT OF HOLE WHEN HIS RIGHT FOOT GOT CAUGHT BY THE BOOM AGAINST THE FRAME OF THE ROOF BOLTING MACHINE.

EMPLOYEE WAS OPERATING ONE SIDE OF THE TWIN HEAD ROOF BOLTING MACHINE WHEN HE ACCIDENTLY PINNED HIMSELF AGAINST THE COAL RIB WITH THE BOOM OF THE BOLTING MACHINE.

EMPLOYEE WAS OPERATING THE REMOTE CONTROL MINER WHEN A COAL RIB ROLLED OFF AND STRUCK HIM ON THE RIGHT LEG. ACCIDENT OCCURRED ON A PILLAR SECTION. (RETREAT MINING)

EE WAS USING AN IMPACT WRENCH WHEN THE AIR HOSE BLEW OFF AND FLEW SOMETHING INTO HIS LEFT EYE. FOREIGN BODY WAS IMBEDDED IN THE LEFT CORNEA. LATE IN REPORTING AS A MEDICAL TREATMENT DUE TO WAI TING ON DR. VERFICATION ON OBJECT BEING IMBEDDEDIN EYE.

EE STATED THAT WHILE INSTALLING ROOF BOLTS THE DRILL STEEL STRUCK HIS RIGHT ARM AND HAND.

EMPLOYEE STATED THAT WHILE OPERATING THE DOZER ON THE COAL STOCKPILE HE RAN OVER THE NO 1 FEEDER AND IT FELL THROUGH WITH HIM CAUSING HIM TO EXPERIENCE PAIN IN HIS BACK. EMPLOYEE CONTINUED TO WORK UNTIL 09-04-92 WHICH IS THE FIRST DAY OFF DUE TO THIS ACCIDENT.

EMPL INSTALLING BOLTS,WRENCH LAYING ON BOLTER HEAD AND AS HEAD WAS RAISED THE WRENCH GOT CAUGHT AND FLIPPED UP MASHING MIDDLE FINGER ON RIGHT HAND UP AGAINST THE ATRS.

EMPLOYEE WAS OPERATING A ROOF BOLTER AND EXPEREINCED PAIN IN THE GROIN. ABSENT SINCE 03-16-92.

EMPL OPERATING DOZER IN COAL STOCKPILE.DOZER BACKED UP OVER COAL RIDGE AND THIS CAUSED EMPL TO BE SUDDENLY JERKED AND EXPERIENCED PAIN IN NECK.

EMPL WAS OPERATING CONTINUOUS REMOTE MINER ON PILLAR SECTION WHEN COAL RIB ROLLED OFF & STRUCK IM ON LEFT LEG.

EMPLOYEE WAS DRILING HOLES IN ORDER TO INSTALL ROOF BOLTS AND WHILE DRILLING AND INSTALLING THE ROOF BOLTS THE EMPLOYEE FELT SOMETHING STRIKE HIM IN THE RIGHT EYE.

OPERATING A DOZER IN CLEAN COAL STOCKPILE,EMPLS DOZER STRUCK BY ANOTHER DOZER RESULTING IN A BACK INJURY.EMPL STARTED MISSING WORK DUE TO THIS ACCIDENT ON 2-9-92.COMPANY OFFICIAL NOTIFIED ON 4-24-92.

EMPLOYEE WAS INSTALLING RESIN BOLTS WITH A SINGLE HEAD ROOF BOLTER, AS HE WAS PUSHING THE ROOF BOLT WITH A HALF HEADER UP INTO THE BOLT HOLE, THE BOLT BENT AND CAUGHT THE EMPLOYEE'S FINGERS, P INCHING THEM.

EMPLOYEE WAS IN THE PREPARTION PLANT USING AN AIR GUN. PARTICLES OF DIRT AND METAL BLEW UP INTO HIS FACE OFF THE EXHAUST OF THE AIR WRENCH.

EMPL WAS USING A CUTTING TORCH AND WELDING ON A ROOF BOLTING MACHINE HE STATED THAT WHILE DOING THIS HE BREATHED THE FUMES AND THEY IRRITATED HIM

EMPLOYEE WAS BOLTING THE ROOF WHEN A LOOSE PIECE OF DRAWROCK FELL AND STRUCK HIM ON THE LEFT HAND.

EMP. WAS OPERATING THE ROOF BOLTING MACHINE USING A LONG DRILL STEEL, WHEN HE GAVE TO MUCH UP PRESSURE THE DRILL STEEL BOLTED OUT AND HIT HIS LEFT ARM.

EMPLOYEE WAS IN3THE PREPARATION PLANT CHECKING ON A PUMP WHEN HIS RIGHT THUMB GOT CAUGHT IN THE PUMPING MECHANISM. THIS WAS A SLOW MOVING PUMP AND WOULD NOT HAVE NORMALLY POSED ANY. HAZARD. BO LTS HAD WORKED 5OOSE FROM THE DRIVE MECHANISM CAUSING A PINCH POINT HAZARD.

AS EMP WAS PUTTING A BOLT INTO THE HOLE THE ROOF BOLT MISSED THE HOLE AND AS PRESSURE WAS APPLIED TO INSERT THE BOLT IT BOUNCED BACK AND HIT THE LEFT HAND AND INJURED THUMB

EMPL INSTALLING METAL STRAP AND HAD POGO STICK UNDER END OF STRAP TO HOLD IT UP WHILE HE INSTALLED ROOF BOLTS AND METAL STRAP FELL AND HIT EMPL ON LEFT SIDE OF FACE.

EMPL HAD HAND POSITIONED ON ROTATION HEAD OF BOLTING MACHINE.AS IT WAS BEING RAISED HAND BECAME CAUGHT AGAINST CANOPY OF BOLTER.

EMPLOYEE WAS OPERATING THE CONTINUOUS MINING MACHINE, HE WAS CUTTING THE BOTTOM AND THIS CAUSED THE MACHINE TO BOUNCE UP AND DOWN. THEREFORE CAUSING THE EMPLOYEE TO BE BOUNCED AROUND AND INJU RING HIS BACK. EMPLOYEE THOUGHT HIS BACK PAIN WAS RELATED TO A URINARY TRACT DISORDER. REPORT HELD UNTIL RESULTS OF TESTS READ NEGATIVE.

EMPLOYEE WAS OPERATING THE CONTINUOUS MINING MACHINE HE HAD HIS RIGHT LEG IN A STRETCHED PUT PSOXX POSITION & WHILE LOADING UP SOME LOOSE COAL A PIECE OF DRAWROCK FELL AND HIT THE RIGHT LEG

EMPLOYEE WAS OPERATING THE CONTINOUOUS MINING MACHINE AND AS H E WAS CUTTING ROCK WHILE TAKING BOTTOM THE MACHINE BOUNCED UP AND DOWN AND HURT HIS BACK.

EMP WAS IN PROCESS OF INSTALLING FIRST ROOF BOLT OF THE SHIFT AS HE WAS INSERTING THE BOLT INTO DRILLED HOLE IT BENT AND WHILE TRYING TO RETRIEVE IT PIECE OF ROCK FELLL 4X8X5 STRIKING EMPLOYEE

EMPLOYEE WALKED INTO & BUMPED AGAINST A CONTIUOUS MINER BOOM AS IT WAS BEING TRAMMED FROM THE NO.2 THRU THE BREAK INTO THE NO.1 ENTRY.

EMPLOYEE WAS INSTALLING AROOF BOLT WHEN A LOOSE PIECE OF DRAWROCK FELL AND STRUCK HIM IN THE FACE

WHILE OPERTING ROOF BOLTING MACHINE ON 0030-0 SECTION SOME CAR COAL FELL STRIKING EMPLOYEE ON LEFT HAND