Buscar en el registro

EMPLOYEE WAS GRINDING WITH SAFETY GLASSES AND FACE SHIELD AND GOT SOME GRINDING DUST IN HIS RIGHT EYE.

EE WAS GRINDING ON A DIAPHRAM WALL WHEN SOME GRINDING DUST GOT IN HIS RIGHT EYE.

EMPLOYEE HAD BEEN PERFORMING MAINTENANCE ACTIVITIES INCLUDING DRILLING AND RIVETING. HE BELIEVES THAT METAL SHAVINGS FROM THE DRILLING ACTIVITY FELL ON HIS SHIRT SLEEVES OR HANDS. LATER IN THE SHIFT HE RUBBED HIS EYE AND THAT IS WHEN HE THINKS THE PIECE OF METAL SHAVING WAS FORCED IN HIS EYE. HE WAS USING SAFETY GLASSES.

EMPLOYEE WAS WORKING PUTTING A SHIELD ON THE DRIVELINE OF A TRACK DOZER. ANOTHER MECHANIC WAS NEARBY GRINDING ON METAL TO MAKE A BRACKET FOR A GREASE LINE. APPARENTLY A PARTICLE FROM THE GRI NDING ACTIVITY STRUCK THE INUURED EMPLOYEE IN THE EYE. HE WAS WEARING SAFETY GLASSES WITH SIDE SHIELDS AT THE TIME OF THE EVENT.

EMPLOYEE WAS PREPARING TO MACHINE AN ENGINE ADAPTER FOR A 120 TON COAL HAULER USING A LARGE METAL LATHE IN THE MACHINE SHOP. HE WAS IN THE PROCESS OF DIALING IN THE LATHE AND WAS TURNING THE LARGE CHUCK WITH HIS RIGHT HAND. HE WAS ROTATING THE CHUCK WITH HIS RIGHT HAND AND WHEN THE CHUCK CAME AROUND, A TOOL IN THE CHUCK CAUGHT HIS FINGER BETWEEN THE TOOL AND LATHE BED.

EE WAS PART OF A CREW OF WELDER/MECHANICS REPAIRING A COAL SHOVEL. WHILE WELDING, HE GOT THE ARC WELDING ROD STUCK TO THE WORK HE WAS DOING. HE RAISED HIS WELDING HOOD WHILE ATTEMPTING TO FREE THE STUCK ROD. WHEN THE WELDING ROD CAME FREE, IT ARCED CAUSING A FLASH BURN TO HIS EYE.

EMPLOYEE WAS CHIPPING OLD PAINT IN THE HOUSE OF A DRAGLINE MAKING IT READY FOR NEW PAINT. HE WAS USING A POWERED CHIPPING HAMMER, AND DURING THIS WORK A FOREIGN PARTICLE APPARENTLY ENTERE DOR WAS RUBBED ACROSS HIS EYE. HE WAS WEARING SAFETY GLASSES AND A FACE SHIELD, BUT HIS GLASSES DID NOT HAVE SIDE SHIELDS ON THEM.

EMPLOYEE WAS DOING WELDING REPAIR ON THE HOIST DRUM OF A DRAGLINE. HE WAS REPOSITIONING HIMSELF TO CONTINUE THE WELDING JOB WHEN HE INADVERTENTLY CONTACTED HIS LEFT ARM WITH THE WIRE FEED WELD ING APPARATUS HE WAS HOLDING INHIS RIGHT HAND. THE WIRE IN THE WELDING TIP PUNCTURED HIS LEFT ARM. EMPLOYEE TREATED AND RETURNED TO WORK THAT NIGHT, BUT DID NOT RETURN UNTIL 12/23/98.

EE WAS PART OF A CREW OF WORKERS ASSIGNED TO CHANGE OUT A SET OF HOIST ROPES ON AN 8050 MARION DRAGLINE. DURING THE JOB SEVERAL LOOPS OF WIRE ROPE BECAME LOOSE ON THE HOIST DRUM. EE WAS COORDI NATING THE WORK BY TELEPHONE WITH THE DRAGLINE OPERATOR. AS THE OPERATOR SLOWLY TURNED THE HOIST DRUM A LOOP OF ROPE 10-15 FT LONG CAME OVER THE TOP OF THE DRUM AND SLID OFF THE SIDE STRIKING

MINER WAS OPERATING A D10 DOZER, RIPPING & SHAPING THE HIGHWALL FOR A DRAGLINE OVERBURDEN REMOVALOPERATION. HE BACKED INTO THE HIGHWALL TO RIP THE LOWER PORTON, THEN, MOVED THE DOZER FORWARD ACROSS THE RECENTLY EXPOSED COAL SURFACE. WHILE MOVING THE DOZER ACROSS THE COAL SURFACE HE FELTPAIN IN HIS SHOLDER. PAIN IN HIS UPPER BACK AND SHOULDER CONT AND HE SAW A CHIROPRACTOR 4/1/98

OPERATING A MOTOR GRADER THROUGH A ROUGH CUT AREA. WHILE TURNING HEAD TO THE RIGHT DURING A BACKING MOVE SUSTAINED ACUTE ONSET OF NECK PAIN.

PUSHING COAL INTO TRAP WITH D9N DOZER. CAME OFF A COAL WINDROW JOLTING LOW BACK. SEEN BY CHIROPRACTOR NEXT AM AND RETURNED WITHOUT RESTRICTION.

AT SOME POINT DURING DAY SHIFT WHILE GRINDING OR AIR ARCING, EE SUSTAINED A FOREIGN PARTICLE EMBEDDED IM RT. CORNEA. RESULTING IN A CONJUNCTIVITIS.

OPERATING A ROUTER, STABLIZING THE WOOD WITH THE LT HAND DISTAL TIP OF THE RT INDEX PINCHED BETWEEN WOOD AND BIT, RESULTING IN LACERATION, AVULSION AND FRACTURE.

WELDER WAS USING A MAGNESIUM BAR, HOT METAL ENTERED PROTECTIVE LEATHER GLOVE, CAUSING A 2 DEGREE BURN TO RIGHT HAND.

WHILE ROUTERING EDGE OF PLYWOOD BOX SUSTAINED A FOREIGN PARTICLE IN THE LEFT EYE. WAS WEARING EYE PROTECTION AT THE TIME...REPORTEDLY GLASSES & FACE SHEILD.

CLEANING PARTS WITH AIR GRINDER, FACE SHIELD & PROTECTIVE GLASSES IN PLACE. METAL FOREIGN BODY IN RIGHT CORNEA.

UPON AWAKENING 5-21-93 EMPLOYEE NOTED RT. EYE IRRITATION. CLINIC EXAM REVEALED A FOREIGN PARTICLE RT. EYE. EMPLOYEE WAS INVOLVED IN GRINDING ON METAL THE PRECEEDING DAY AND THOUGH HE WAS WEARI NG A FULL FACE SHIELD AND SAFETY GLASSES HE PRESUMES THIS TO BE THE CAUSE.

USING LATHE TO FACE OFF EDGE OF PIPE. HANDLE END OF FILE WHICH WAS NOT PROPERLY COVERED WAS STRUCK BY THE CHUCK. THIS RESULTED IN THE HANDLE PUNCTURING THE RIGHT HAND PALM BETWEEN THE THIRD AN D FOURTH DIGIT WEB SPACE. TREATED WITH SUTURES AND DRAIN, ABLE TO RTW NEXT SCHEDULED SHIFT.

INVOVLED IN WELDING ACTIVITIES. BENT OVER TO EXAMINE BURNING MATERIAL ON UNDERSIDE OF PLATE, COOLING SLAG POPPED AND A SMALL METAL PARTICLE ENTERED BEHIND THE SAFETY GLASSES AND EMBEDDED IN TH E LEFT CORNEA.

54736YEE SPENT THE MORNING RIPPING AND DOZING A BACK DIG.AT BREAKTIME WHEN EXITING DOZER,COMPLAINED OF LOSS OF FEELING AND FULL USE OF THE LEFT LOWER LEG.NO SPECIFIC INJURY OR INCIDENT REPORTE 4?000

EMPL PLACING A METAL PLATE ON A BENCH DURING A FABRICATION TASK. THE CHAIN BETWEEN SHOP HOIST AND PLATE CLAMP SLIPPED AND PINCHED FINGER. THE CLAMP WASNT APPROPRIATE FOR THE JOB AND WORKER WAS USING HAND TO GUIDE A SUSPENDED LOAD.RESULTING LACERATION REQUIRED SEVERAL STITCHES TO CLOSE.

REMOVING A GREASE CONTAINMENT CAP FOR BOLT INSPECTION. INSIDE ROLLER BAND CAUGHT THE CAP DRAWING HAND AGAINST IT AS THE DRAGLINE TURNED,WITH A RESULTANT PINCH/CRUSH AVULSION TO DISTAL TIP OF R IGHT 5TH DIGIT.

EMPLOYEE WAS WELDING AT THE ACCP CONSTRUCTION SITE. DEBRIS FROM WELDING FLEW INTO LEFT EYE.

EE DOING GRINDING IN COOL HOPPER-DEBRIS GOT IN EYE.

INJURED WAS VIBRATING CONCRETE ON HIS 1ST SHIFT AND SAID HE HURT HIS BACK.

WHILE USING CUTTING TORCH A SPARK APPARENTLY ENTERED RIGHT EAR CANAL.RESULTING IN EAR INFECTION.

WHILE INVOLVED IN CUTTING AND FITTING BUCKET WEAR PLATES IN SHOP SUSTAINED A AIRBORNE F.B. TO THE RIGHT EYE. Y

INVOLVED IN REMOVING A PIN FROM A DRAGLINE BUCKET TRUNION LINK. CREW INSIDE OF BUCKET WERE USING A RAM TO FORCE PIN, EE MISCALCULATED AND STEPPED TO THE OUTSIDE OF BUCKET AND LIFTED PIN JUST A S IT WAS STRUCK WITH THE RAM. RESULTING IN HIS BEIGN THROWN AGAINST A PARKED PICK UP TRUCK THEN FALLING TO THE GROUND. SAW D.C. ON 6-1- BACK PAIN.

GRINDING WELD INSIDE OF COAL SHOVEL STICK. ALSO USING STUD GUN. NOTICED NECK MUSCLES TIGHT. NO SPECIFIC ACCIDENT. FOLLOWING DAY NECK STIFF & PAINFUL.

WHILE USING 1'IMPACT WRENCH AND DRIVE RACHET TO TIGHTEN BOLTS ON CRADLE AND END PLATE OF POINT SHEAVES SHAFT SUSTAINED STRAIN TO LOW BACK MUSCLES.BECAME REPORTABLE 8-7-89 SAW CHIROPRACTOR.

THE DAY AFTER AIR ARCHING IN A CONFINED AREA, WAS NOTED TO HAVE INFAMMATION IN LEFT EYE. EXAM FOUND A METAL FRAGMENT IMBEDDED IN CORNEA. EMPLOYEE NOT AWARE OF SPECIFIC CAUSE OR ACCIDENT.

INJURED WAS LYI3G ON HIS BACK GRINDING OVERHEAD ON THE MAST OF AN OVERBURDEN DRILL WHEN THE GRINDER CAUGHT AND TWISTED HIS SHOULDER AND BACK.RESULTING IN A STRAINED MUSCLE IN HIS UPPER LEFT BA CK. 3

INJURED WAS PER0ORMING REGULAR JOB FUNCTIONS ON 14G MOTOR GRADER HE REMOVED GUARDS FROM FAN SHROUD AREA TO CHECK ELECTRICAL TAIL LIGHT WIRING WHILE HE WAS REMOVING WIRE FROM THE AREA HE WAS D ISTRACTED BY AN2THER EMPLOYEE AND HIS HAND CAME IN CONTACT WITH THE MOVING FAN BLADE HE RECIEVED LACERATIONS ON 2 FINGERS

WELDING BALL OF3HOT METAL FELL ON HIS FOOT FIRE WENT INTO HOLE IN BOOT CAUSING 2ND & 3RD DEGREE BURNS ON TOP OF LEFT FOOT.

CUTTING WITH TR5CK TORCH METAL BAR FELL TO FLOOR CAUSING PARTICLE TO FLY UP INTO EYE

OPERATING COAL 8RILL, SUSTAINED FOREIGN MATTER LEFT EYE.

I NAME OPERATIN1 THE 14G BLADE HEADING WIST ON THE AREA A CRUSHER RAMP ROAD WHEN H E HAD A STROKE CAUSING HIM TO LOOK CONTROL OF THE BLADE IN THE PROGRAM HE KNOCKED OVER A POWER POLE CROSSED B ACK OVER THE ST2CKABLE ROAD AND HIS BLADE CAUSE TO STOP WHEN IT COLLIDED WITH THE COAL STOCKPILE WAS NO INJURY TO HIM OR THE BALADE.

EMPL OPERATING DOZER IN HOURS OF DARKNESS AND IN THE PROCESS OF BACKING UP HE RAN OVER LARGE ROCK WHEN DOZER SLAMMED DOWN IT JARRED HIS BACK GIVIVNG HIM A BACK STRAIN.

THE INJURED WAS USING A AIRHOSE TO BLOW OUT HEADBOLT STUD HOLES, AND SOME MATERIAL BLEW BACK INTO HIS FACE AND SOME FOREIGN MATERIAL WAS BLOWN PAST HIS SAFETY GLASSES AND WAS LODGED INTO HIS L EFT EYE. THE DR REMOVED A PIECE OF STEEL AND SOME RUST PARTICLES. THE INJURED DID NOT REPORT THIS ACCIDENT TO SUPERVISOR UNTIL LATE IN THE AFTERNOON ON 9-16-85.

EMPLOYEE WORKED NORMAL SHIFT 6-14-85. ON 6-17-85 HE WAS UNABLE TO REPORT TO WORK DUE TO BACK PAIN.

THE CREW WAS INSTALLING A HEAVY BEARING THAT WAS SUSPENDED FROM OVER HEAD CRANE THE BEARING STARTED TO SLIP AND THE INJ INSTINCTIVLY GRABBED FOR IT AND GOT TWO FINGERS ON LEFT HAND PICHED BETW BEARING AND THE BEARING SEAT

EMPLOYEE WAS PERFORMING NORMAL DUTY AS SCRAPER OPERATOR. DURING THE LOADING OF HIS SCRAPER HE WAS SCRAPER OPERATOR. DURING THE LOADING OF HGI SCRAPER HE WAS TURNED IN HIS SEAT AND LOOKING CKWARDS WAITING FOR THE PUSHCAT. WHEN THE PUSHCAT PICKED HIM UP IT BUMPED INTO THE SCRAPER HARDER THAN NORMAL. THE JOLT AND THE OPERATORS POSITION IN THE SEAT CONTRIBUTED TO THE INJURY.

WHILE USING A SKILL SAW TO CUT A USED FORM (MAKING A NEW FORM) THE BLADE CUT INTO SOME OLD DRIED CONCRETE CAUSING SAW TO KICK AND BLADE CAUGHT LITTLE FINGER OF LEFT HAND