Buscar en el registro

Employee was welding and leaned to get another welding rod. When he did, his neck and arm contact hot metal causing a burn to the right side of his neck. He continued to work until 9/28/10 at which time he sought medical treatment for an infection to the burn.

EE was steam cleaning a 980 end loader, pulled the hose from off the steam cleaner, and bumped his right elbow on the end loader counterweight. he sought medical attention and thing broken. he continued to work until july 27th when he began misisng work. he was admitted to the hospital due to welling having to have his elbow drained.

THE EE WAS CHANGING THE SHEAR PIN ON THE GEAR END OF THE #2 BIRD DRYER. HE DID NOT ALLOW THE GEARS ENOUGH TIME TO STOP ROTATING BEFORE INSTALLING THE SHEAR PIN ALLOWING HIS GLOVE TO BECOME CAU GHT N THE SHEAR PIN HOLDER. THIS CAUSED A LACERATION TO HIS RIGHT ARM. HE WENT TO HOSPITAL WHERE SUTURES WERE APPLIED.

EE AND COWORKER WERE UTILIZING A ROOF BOLTER TO PERFORM REHABILITATION WORKG THE THIRD SOUTHEAST SUBMAINS. EE WAS STANDING BESIDE THE MACHINE WITH HIS LEFT HAND OF TOP OF IT, WHEN A PIECE OF D RAW ROCK FELL FROM THE MINE ROOF STRIKING HIS HEND. THIS REULSTED IN A HAIRLINE FRACTURE BETWEEN THE FIRST AND SECOND KNUCKLE OF HIS LEFT LITTLE FINGER. THE EE ALOS RECEIVED SUTURES TO THE FR

EE WAS UTILIZING A 120 VAC METABO MODEL 126 HAND GRINDER WITH A WIRE BRUSH ATTACHMENT TO REMOVE RUST, DIRT AND OTHER DEBRIS FROM A METAL CLUTCH HOUSING. APPARENTLY A SMALL PIECE OF THE WIRE BR USH CAME OFF AND EMBEDDED IN THE EE S RIGHT LEG.HE CONTINUED TO WORK AND DID NOT LOSE TIME FROM THE ACCIDENT. HOWEVER, THE WOUND REQUIRED SUTURES AND THUS IS REPORTABLE.

EMPLOYEE WAS INSTALLING THE RIB BOLT IN THE FIFTH ROW IN A CUT. THE COAL RIB ROLLED OFF AND STRUCK THE EMPLOYEE IN THE BACK AND HIPS. THE MATERIAL WITH FELL WAS APPROX. 116" X 20" X 9". EMPLOY EE SUFFERED ABRASIONS TO HIS LOWER BACK AND HIPS

EMPLOYEE WAS STANIDNG BESIDE A CONTINUOUS MINER. WHEN TEH OPERATOR TRAMMED THE CONT. MINER IN REVERSE, THE EMPLOYEE WAS PINNED BETWEEN THE TRAILING CABLE RESTRAINING CLAMP AND THE COAL RIB. H E SUFFERED CRUSHING INJURIES TO THE PELVIC AREA UPPER LEGS. THE INJURED EMPLOYEE WAS OBSERVING HT EMTHANE MONITOR READOUT IN THE DEKC OF HT EMACHINEAT THE TIME OF THE ACCIDENT.

EMPLOYEE WAS CUTTING DOWN BELT STANDS, PIECE OF ROCK 55" X 59" X 3" FELL AND STRUCK HIM ON HIS RIGHT KNEE.

EMPLOYEE WAS UTILIZING AN ELECTRICAL CIRCULAR SAW (HAND TOOLS) TO CUT A 2"X10" BEAM. THE SAW BLADE STALLED IN THE WOOD AND KICKED BACKWARDS. THE EMPLOYEE MOMENTARILY LOST HIS BALANCE AND FEL L BACKWARDS. THE SAW BLAD CUT THE EMPLOYEE'S RIGHT THIGH.

INSTALLING ROOF BOLT IN OUTSIDE HOLE OF #6 HEADING WHEN ROOF ROCK 1" X 18" X 15" FELL STRIKING EMPLOYEE ON LEFT ARM. LACERATION REQUIRED 7 SUTURES.

INDIVIDUAL WAS REMOVING HIS FINISHING STEEL FROM HOLE, WHEN A PIECE OF ROCK 6" X 4" X 2" FELL FROM THE ROOF STRIKING HIM ON THE LEFT OF CHIN.

INDIVIDUAL WAS CUTTING WIRE FROM BUNDLE OF ROOF BOLTS. HE WAS STANDING BETWEN THE WHEELS OF THE ROOF BOLTING MACHINE. THE OPERATOR MOVED THE ROOF BOLTING FORWARD. THE BACK WHEELS RAN OVER T HE INDIVIDUALS RIGHT FOOT.

INDIVIDUAL WAS OPERATIN A ROOF BOLTER, WHILE DRILLING THROUGH A CURTAIN BOARD AND WAS PULLING HIS DRILL STEEL DOWN THROUGH THE CURTAIN BOARD HE HAD ROTATION ON AND WAS PULLING ON THE STEEL AND HIS RUBBER GLOVE GOT HUNG ON THE STEEL AND TWISTED HIS HAND HURTING HIS LITTLE FINGER. INDIVIDUAL DID NOT START MISSING WORK UNTIL 3/4/93.

INDIVIDUAL WAS GRINDING (WITH DISC GRINDER) AWAY SLAG AND WLED FROM METAL BEING USED TO REPAIR 482 SCOOP. THE GRINDER HUNG ON THE OLD JAGGED WELD AND KICK OUT. THE GRINDER CAUGHT HIS LITTLE FINGER TEARING A HOLE IN THE SIDE OF IT.

HAD LOADED RT SUMP OUT OF FIRST CUT IN 1 HEADING DRAW ROCK HAD FALLEN ON TOP OF THE MINER. HAD BACK MINE OUT ABOUT 3/4 WAY OF THE CUT WHEN HE STOPPED TO MOVE THE MINER CABLE. A PIECE OF DRAW R OCK FELL FROM THE MINER AND HIT HIS LEFT FOOT.

WHILE INSTALLING A ROOF BOLT A PIECE OF ROCK (9' X 18" X 2") FELL BETWEEN THE RIB AND CANOPY AND STRUCK THE INDIVIDUAL ON THE BACK AND LEFT LEG, PINNING HIM ON THE MINE FLOOR.

WHILE ROOF BOLTING ROOF, A PIECE OF DRAW ROCK (2'X3'X6') FELL AND HIT THE CANOPY AND THEN HIT THE INDEIVIDUAL IN THE ARM.

DRAW ROCK FELL BETWEEN RF BOLTS HIT ON NECK AND ON SHOULDER

WENT TO SWING HEAD(TWIN HEAD ROOF BOLTER) AND THE LEVER FOR THE HEAD JACK WAS BENT UNDER.MOVED THE WRONG LEVER(SWING JACK LEVER) LETTING THE HEAD JACK DOWN ON FOOT. Y

WAS PUTTING TOGETHER HIS TWO PIECE DRILL STEEL TO FINISH DRILLING THE HOLE FINGER(LEFT INDEX) WAS CAUGHT BETWEEN STEEL DRILL & PINCHED HIS FINGER

HE WAS TRAMMING MINER AND STOOD ON RUB RAIL TO TRAM THE MINER BY SOME GOB.HE TRAMMED THE MINER ACROSS THE TRACK AND THE MINER TILTED AND THREW/MASHED INDIVIDUAL INTO THE MINE ROOF.

I HAD LEFT HAND ON THE STEEL TRAY AND A PIECE OF SLATE FELL AND HIT FINGER.

INJURED WAS FLOATING THE MINER MAN OUT AND A ROCK FELL OUT BETWEEN THE BOLTS AND ROAD HIM TO THE GROUND.

INSTALLING BOLT IN SQUATTING POSITION AND TWISTED KNEE.

A ROCK (3'X2'X1") FELL FROM BETWEEN RIB AND BOLTS HITTING INJURED ON HIS RIGHT SIDE AND KNOCKING HIM DOWN.

BOLTING TOP.A ROCK FELL BETWEEN BOLTS STRIKING HIM ON HIS SHOULDER, AND KNOCKING HIM DOWN.

OPERATING REMOTE CM -THERE WAS A RIB ROLL WITHOUT WARNING,KNOCKING HIM AGAINST SHUTTLE CAR DECK.

BOLTING TOP AND THE WRENCH FELL BETWEEN THE DRILL POT AND THE CANOPY JACK. HE HAD HIS HAND ON THE WRENCH AND WHEN HE RAISED THE BOOM, HIS HAND WAS CAUGHT BETWEEN THE DRILL POT AND THE CANOPY J ACK.

OPERATING ROOF BOLTING MACHINE & A PIECE OF COAL BROKE LOOSE & HIT HIM

INSTALLING ROOF BOLT & HIT FINGER WITH WRENCH.

BOLTING TOP AND A PIECE OF SLATE BROKE AND FELL AGAINST HIS LEG.

OPERATING ROOF BOLTING MACHINE. WHILE DRILLING HOLE FOR BOLT, A PIECE OF ROCK CAME LOOSE AND HIT HIM ON HIS ARM.

ROOF BOLTING SWINGING HEAD OVER TO PUT UP RIB BOLT ON 2 LEFT AND THE HEAD CAME OVER TOO FAR PINCHED AGAISNT RIB

DRILLING A HOLE AND A PIECE OF ROCK FELL ON HIS HAND.

SPOTTING BOLTS AND THE HELPER MOVED THE PINNER UP ON HIS FOOT

BACKING MINER UP FROM DECK AND RAN OVER SOMETHING WHICH CAUSED HIM TO HIT AGAINST CANOPY.

BOLTING TOP AND CAUGHT HIS HAND BETWEEN THE CANOPY AND ROOF BOLT.

HE WAS SITTING DOWN AND THE POT FROM THE ROOFBOLTER DROPPED DOWN ON HIS KNEE.

HE WORKED ENTIRE SHIFT & BEGAN COMPLAINING OF BACK PAIN.

HE WAS SITTING IN THE BOLTER DECK AND BEGAN TO FFELL PAIN IN HIS BACK.

A PIECE OF ROCK FELL & HIT HIM ON HIS BACK CAUSING HIM TO FALL ON HIS ANKLE.

PINNING TOP UNDER CANOPY, ON HIS KNEES, AND BEGAN TO FEEL PAIN.

HE WAS LIFTING A MANBUS WITH THE CRFANE & THE MANBUS SLIPPED FALLING APPROX.2FT. & HIT HIS FOOT

BOLTING THE TOP & A PIECE OF DRILL STEEL BROKE HITTING HIM IN THE FACE

HE WORKED ENTIR9 SHIFT & BEGAN COMPLAINING OF BACK PAIN HE SAW A DOC.ON 012788 & DOC.DIAGNOSED HIS PAIN AS A RECURRENCE OF AN INJURY HE RECEIVED 010587

HE WAS BOLTING 7OP AND HIS HAND SLIPPED OFF THE BOLT. HE CAUGHT HIS HAND BETWEEN THE POT OF THE PINNER.

HE WAS SITTING 3EXT TO A RIB OPERATING A REMOTE CONTROL AND A PIECE OF ROCK FELL ON HIM.

HE WAS PUSHING 7OAL. THE COAL PILE WAS ROUGH AND HE LET THE DOZER DROP DOWN IN THE HOLE.

HE WAS PUTTING 6P ROOF BOLT, HE WAS USING A WRENCH AND DID NOT HAVE THE ROTATION COMPLETELY OFF. WHEN HE LET THE HEAD DOWN, THE WRENCH COME OUT AND HIT HIM ON H IS ARM

HE WAS BOLTING 7HE TOP AND A PIECE OF ROCK FELL HITTING HIM ON HIS BACK.