Buscar en el registro

EMPLOYEE WAS ASSISTING IN REMOVING A PIECE OF FOULED DRILL STEEL OUT OF TOP. WHEN EMPLOYEE WALKED AROUND FRONT OF BOLTER HE SLIPPED AND FELL, KNOCKING HIS HARD HAT OFF. THE STEEL FELL ND HIT HIM ON THE TOP OF THE HEAD.

EE WAS OPERATING A SHUTTLE CAR AND WHILE BEING LOADED, THE BOOM OF CONTINUOUS MINER WAS AGAINST ROOF AND A PIECE OF ROCK RICOCHETED FROM THE BOOM AND STRUCK VICTIM ON UPPER LIP.

EE WAS STARTING TO DRILL HOLE & A PIECE OF ROCK FELL OUT OF ROOF AND HE RAISED HIS ARM UP TO PROTET HIS FACE & UPPER BODY AND THE ROCK HIT HIS FOREARM

EE WAS WITHOUT A HELPER AND WHILE TRAMMING MINER OUT OF FACE AND PULLING TRAILING CABLE WITH ONE HAND AND REMOTE POST WITH OTHER, HE FELT PAIN IN GROIN AREA.

EE WAS STANDING IN FRONT OF MATERIAL BEING PULLED WITH AN AIR TUGGER MATERIAL WOULD NOT MOVE, MATERIAL TORE AND PULLING DEVICES FLEW OUT AND HIT EE IN THE CHEST AND FACE. MATERIAL BEING PULLED WAS OLD DUSTER TABLE LAUNDERS. THEY HAD WORN & RUSTY.

EMPLOYEE WAS IN PROCESS OF INSTALLING FIRST BOLT OF BOLTING PATTERN (OUTSIDE BOLT) WHEN A PIECE OF 4'LONG,6"THICK AND 12" WIDE (APPROX.) BROKE LOOSE FROM ROOF & RIB SLID DOWN CANOPY STRIKING I NJURED ON HIP AND FOOT.

EE WAS HELPING ROOF BOLTER OPERATOR TO CROSS CONT. MINER CABLE. EE PLACED HIMSELF ON THE OFFSIDE OF MACHINE & THE BOLTER OPERATOR COULDN'T SEE HIM. VICTIM WAS CAUGHT BETWEEN BOLTING MACHINE & COAL RIB. EE DID NOT START RESTRICTIVE DUTY UNTIL 12/9/97.

EMPLOYEE WAS INSTALLING 1ST ROW OF BOLTS. HE PUT UP OUTSIDE BOLT, SET DRILL IN TO PUT UP INSIDE BOLT AND A ROCK FELL FROM BETWEEN 1ST BOLT AND RIB STRIKING VICTIM ON ANKLE.

EMPLOYEE WAS INSTALLING 5TH ROW OF BOLTS IN #7 ROOM WHEN HE ENCOUNTED A LOOSE PIECE OF ROCK, HE TRIED TO TAKE DOWN AS STEELL PENATRATED THE LOOSE ROCK IT FELL AND EMPLOYEE JUMPED BACKWARDS TO AVOID THE FALLING ROCK AND SPRAINED HIS KNEE.

MINER HAD TURNED THE RIGHT BREAKER IN #1 ENTRY AND HAD LEFT A BROW ON TEH RIGHT SIDE. THE BOLTER HAD PUT UP 4 ROWS OF BOLTS BT COULD NOT GET A BOLT. IN THIS PIECE OF ROCK BECAUSE IT WAS TO C LOSE TO THE RIB. HE WAS BESIDE THE BOLTER CHANGING BOLTS IN THE STEEL WHEN TE ROCK FELL AND HIT HIM ON HIS BACK AND LEGS. HE HAD TRIED TO PULL THE ROCK DOWN WITH A SLATE BAR BUT COULDN'T.

EMPLOYEE WAS INSTALLING BOLT INTO FIRST HOLE HE HAD DRILLED WHEN A PIECE OF ROCK BROKE LOOSE FROM BETWEEN BOLT AND RIB STRIKING VICTIM.

EMPLOYEE PUT DRILL STEEL IN CHUCK. HE ENGAGED THE ROTATION BEFORE HIS HAND WAS CLEAR, THUS CATCHING HIS GLOVE, TWISTING HIS LEFT LITTLE FINGER.

EE WAS STANDING ALONG SIDE OF ROOF BOLTER MAKING UP ROOF BOLTS. THE OPERATOR ADVANCED THE BOLTER UP FOR MECHANIC TO CHANGE A HYD HOSE. THE TIME ON THE OFF SIDE RAN ONTO HIS FOOT.

EE WHILE OPERATING A CONTINUOUS MINER STATED HE DIDN'T OBSERVE ANY LOOSE ROCK IN AREA, HE WAS POSITIONED OUTBY 34D ROW OF BOLTS & STATED THE ROCK FELL BETWEEN RIB & 1ST ROW OF BOLTS STRIKING E E ON LEFT SHOULDER.

EMPLOYEE WAS REMOVING HIS DRILL STEEL FROM COMPLETED HOLE ONTO STEEL STORAGE TRAY. A SMALL PIECE OF ROCK FELL FROM ROOF MASHING HIS THUMB BETWEEN ROCK AND DRILL STEEL.

THE VICTIM AND ANOTHER WERE REMOVING ROCK FROM TOP OF MINER. A 3/4" NYLON ROPE WAS WRAPPED AROUND ROCK AND ATTACHED TO A CHAIN THAT WAS ATTACHED TO A ROOF BOLT. THE MINER WAS TRAMMED BACKWARD TO PULL ROCK OFF MINER. AS ROCK STARTED TO MOVE THE ROPE SLIPPED OFF CORNER OF ROCK WHICH BROKE AND A PIECE OF BROKEN ROCK STRUCK VICTIM.

EMPLOYEE JSUT FINISHE DRILLING HOLE AND WHEN HE FINISHED WITH HIS STARTER STEEL HE LAYED IT IN STORAGE TRAY AND THHE STEEL ROLLED OUT OF TRAY AND WAS STICKING OUT IN THE TRAVEL ZONE OF DRILL H EAD. WHEN HEAD WAS LOWERED IT HIT STEEL CAUSING IT TO BE THROWN AND STRIKING VICTIM.

EE WAS CUTTING A 6 INCH METAL PIPE WITH TORCHES AND WHEN CUT WAS THOUGH THE PIPE ROLLED OVER AND MASHED HIS ANKLE AGAINST ANOTHER JOINT OF PIPE.,

EMPLOYEE FINISHED PUTTING UP BOLT THAT DAY SHIFT HAD STARTED AND WHEN HE LOWERED CANOPY FROM TOP, A ROCK FELL FROM BETWEEN BOLTS AND STRUCK HIM ON HEAD AND SHOULDER.

EE WAS SWINGING DRILL HEAD OVER--PUT THE CANOPY AGAINST THE ROOF CAUSING A PIECE OF ROCK TO FALL--IT HIT HIM ON HIS LT. INDEX FINGER.

AFTER THE OPERATOR TRAMMED MACHINE INTO PLACE TO BE BOLTED. ATRS WAS SET UP AND WHEN VICTIM STARTED TO POSITION HIS DRILL TO SET BOLT A PIECE OF ROCK FELL FROM ROOF ONTO CANOPY. ROCK BROKE A PART AFTER HITTING CANOPY AND SMALL PIECE FELL ONTO VICTIMS HAND.

EMPLOYEE WAS OPEN. ROOF BOLTER WHEN A PIECE OF DRILL STEEL ROLLED OUT THE THE TRAY. HE REACHED TO CATCH IT WITH HIS LT. HAND. THE STEEL GOT CAUGHT BETWEEN THE LONG & SHORT ARM OF THE BOLTER & PRESSED HIS LT. LITTLE FINGER AGAINST THE SHORTARM OF THE BOOM.

THE ROCKDUST MACHINE WAS LOADED INTO HOPPER OF UNAHAULER FOR ROCKDUSTING. THE HYDRAULIC HOSE OF DUSTER CONNECTS TO PTD ON OPPOSITE END OF HAULER, THEREFORE THE HOSE LAY ACROSS TOP OF HSULER. WHEN OPERATOR ROUNDED A CORNER THE DUSTER SLID OUT OF HOPPER STRETCHING HOSE AGAINST OEPRATOR KNOCKING HIS HEAD INTO FRAME OF HAULER.

EE WAS USING A TORCH TO CUT A PIECE OF METAL A PIECE OF RUST FLEW OFF THE METAL A GOT INTO HIS LT EYE EE DID NOT REPORT INCIDENT UNTIL 3-31-93. HE WAS WEARING CUTTING GLASSES AT TIME OF INJURY .

VICTIM WAS ASSISTING 2 OTHER EMPLOYEES IN MAKINGA BELT SPLICE WITH CLIPPER SPLICE MACHINE. MACHINE HUNG & THEY HAD TO BACK THE TENSION SCREW OUT TO FREE. AFTER FREEING PRESS VICTIM COULD NOT SEE ADJUSTMENT SO HE PUT FINGER IN JAWS OF PRESSTO CHECK ADJUSTMENT WHEN ANOTHER EMPLOYEE ENGAGED PRESS LACERATING FINGER.

EMPLOYEE WAS DRILLING HOLE IN TOP.THE FINISHER STEEL WAS CAUGHT IN THE TOP.EMPLOYEE PUT STARTER STEEL BACK ON DRILL HEAD AND WAS ALIGNING IT UP WITH THE FINISHER STEEL HAD HIS 1ST THUMB ON TOP OF STARTER STEEL.PUSHED HEAD UP AND CAUGHT HIS RT THUMB BETWEEN STEEL.

EMPLOYEE CORNERED STAB JACK ON BOLTER APPROX. 7" AND IT PUSHED THE CANOPY AGAINST THE ROOF. THE STAB JACK PIN PUSHED THROUGH BOTTOM OF STABJACK AND THE DRILL BOOM DROPPED SUDDENLY. THIS ALLO WED THE CANOPY TO DROP APPROX. 6" AND IT HIT EMPLOYEE ON TOP OF HIS HEAD AND NECK.

54736YEE WAS MAKING A BELT SPLICE AND CAUGHT HIS HAND IN SPLICE MACHINE. I.NAME WAS OPERATING THE SPLICE MACHINE AND INJURED GOT HIS LEFT HAND CAUGHT IN MACHINE. HE WAS WORKING THE SPLICE ADVA 53506ITH HIS RIGHT HAND AND HAD HIS LEFT HAND ON THE MACHINE HOLDING IT STEADY AND IT PINCHED HIS HAND CAUSING A BRUISE WHICH GOT INFECTED. EMPLOYEE WORKED FROM 7-8-92 TO 8-6-92.

REACHED FOR DRILL STEEL FROM STORAGE TRAY AND STRUCK HIS THUMB AGAINST TRAY

EMPLOYEE WAS LOADING TOOLS ONTO A PICKUP TRUCK,WHEN A PIECE OF FLY ASH FROM THE FURNACE FLEW BEHIND HIS SAFETY GLASSES AND GOT IN HIS RIGHT EYE.

INJURED WAS KNEELING ON KNEES CLEANING HIS DUST BOX WHEN A ROCK ROLLED OR FELL FROM ROOF OR RIB (UNKNOWN WHICH) ONTO HIS FOOT.

EE JUST COMPLETED INSTALLING OUTSIDE BOLT IN FIRST ROW. HE MOVED HEAD TO INSIDE TO INSTALL AND BOLT. WHEN HE LOWERED HEAD TO INSERT STEEL. HE FOR SOME UNKNOWN REASON LOWERED HEAD DOWN ONTO HIS LT LEG RESULTING IN LACERATION TO LT FEMUR, ABRASHION TO LT LEG.

WHILE DRILLING A BOLT HOLE IN THE TOP CANOPY WAS AGAINST THE TOP AND BROKE A PIECE OF ROCK LOOSE.WHEN HE LET THE CANOPY DOWN A PIECE OF ROCK FELL OFF AND HIT HIS LT MIDDLE FINGER.

EE WAS BOLTING TOP WHEN HE LET THE CANOPY DOWN A PIECE OF ROCK FELL 3X6X8 OFF CANOPY AND SLID DOWN EMPLOYEE S BACK ONTO HIS FOOT.

EMPLOYEE WAS DRILLING A HOLE FOR ROOF BOLT. WAS STANDING BESIDE BOLTER CHANGING BIT ON DRILL STEEL. A PIECE OF ROCK FELL ON TOP OF THE CANOPY, SLID OFF AND HIT EMPLOYEE ON HIS LEFT FOOT.

EMPLOYEE WAS BOLTING TOP. WAS STARTING TO DRILL A HOLE WHEN A PIECE OF ROCK FELL FROM TOP & HIT HIS RT HAND & FINGER.

EMPLOYEE DID NOT INFORM ME OF ANY ACCIDENT HIM & ANOTHER EMPLOYEE WAS TALKING ABOUT HOW SORE HE WAS RUNNING THE BOLTER & HE SAID THAT HIS ARM WAS HURTING HIM WAS THE REASON MINER CALLED HIM TO FIND OUT WHY HE WASNT WORKING & HE SAID HE HURTHIS ARM WHILE PUSHING ON A ROOF BOLT

EMPLOYEE WAS BOLTING TOP & SWUNG DRILL HEAD OVER & HIT HIM ON HIS RT. KNEE.

EMPLOYEE WAS DRILLING HOLE IN TOP AND A PIECE OF ROCK FELL OUT AND HIM HIM ON HIS LEG.

BOTH OPERATIONS RAISED FLOOR JACKS ABOUT THE SAME TIME AND FRONT OF BOLTER TIPPED DOWN AND CANOPY OF BOLTER CAME DOWN ON EMPLOYEE HEAD. (EMPLOYEE FINISHED SHIFT AND WENT TO DOCTOR THE NEXT DA Y. RETURNED TOW ROK ON 9-4-90.) DID NOT GET OUT OF DOCTOR OFFICE UNTIL 5:00 P.M.

EE WAS DRILLING HOLE FINISHER STEEL STAYED IN HOLE LAYED HIS HAND ON HEAD OF BOLTER AND STEEL FELL OUT OF HOLE AND HIT HIM ON BACK OF HIS LEFT HAND.

EMPLOYEE WAS OPERATING MINER, GOING FORWARD AND WEIGHT OF MINER HEAD WENT INTO A LOW PLACE AND RAISED BACK OF MINER UP, PINNING OPERATOR AGAINST THE TOP.

EMPLOYEE HAD DRILLED UP 1 ST 2' OF HOLE, PUT IN FINISHER AND TRYING TO GET PUSHER IN. AHD HIS HAND ON DRILLS TEEL AND SWUNG DRILL HEAD OVER AND MASHED HIS HAND BETWEEN DRILL STEEL AND CANOPY.

SOME LOOSE ROCK FELL FROM OVER CANOPY OF DRILL HEAD & ONE SMALL PIECE HIT H IM IN THE BACK OF THE HEADK JUST BELOW HIS HAT LINE CAUSING A BUMP & SMALL CUT ON SCALP

EMPL WAS MOVING DRILL HEAD TOWARD MIDDLE TO INSTALL INSIDE BOLT. EMPL HAD RT HAND RESTRING ON HEAD WHEN HEAD MOVED OVER RT INDEX FINGER GOT CAUGHT BETWEEN DRILL HEAD & TRS FRAME & JACK.

EMPL WAS BOLTIN TOP & LET DRILL CANOPY DOWN & IT STRUCK HIM ON TOP OF LEFT SHOULDER CASUING CONTUSION& SPRAIN.

EMPL WAS INSTALLING ROOF BOLT IN DRILLED HOLE WHEN PIECE OF ROCK FELL & STRUCK CANOPY ON DRILL HEAD. ROCK GLANCED OFF & HIT HAT & CAUSED HAT TO CUT LEFT EYEBROW REQURING 5 SUTURES.

EMPLOYEE WAS CHANGING DRILL STEEL IN HOLE AND GOT HIS RT INDEX FINGER CAUGHT BETWEEN TWO PIECES OF DRILL STEEL CAUSING A PIECE OF HIS RT INDEX FINGER TO BE AVULSED

EMPL WAS OPERATING ROOF BOLTER IN #5 FACE DRAW ROCK HAD FALLEN PRIOR AND EMPL WAS OBSERVING TIP WHILE PREPARING TO BOLT EMPL SWUNG DRILL HEAD OVER TOO FAR AND DRILL HEAD STRUCK EMPL ON TOP OF L KNEE CAUSING A SMALL LACERATION AND CONTUSION TO KNEE

EMPLOYEE WAS REMOVING 2 PIECES OF DRILL STEEL FROM HOLE AND SWUNG DRILL HEAD OVER CATCHING HIS LEFT HAND BETWEEN DRILL STEEL AND EDGE OF CANOPY.DRILL STEEL JOINTS STRUCK TOGETHER.