Buscar en el registro

Employee was helping replace segment on an excavator when they set the excavator back down a piece of metal sheared off the segment and struck him in the right leg. He received 5 stitches.

THE EMPLOYEE WAS INSTALLING AIR LOCK DOORS AND CUTTING AND WELDING OVER HEAD WHEN A PIECE OF ANGLE IRON FELL AND ENTERED GLOVE AND SHIRT SLEEVE ON TOP OF RIGHT HAND.

THE EMPLOYEE WAS OPERATING ROOF BOLTER WHEN A PIECE OF DRAW ROCK FELL & HIT HIM ON THE FORE-HEAD & SHOULDER.

EE WAS BOLTING TOP WHEN A PIECE OF DRAW ROCK FELL SMASHING RIGHT THUMB AGAINST CANOPY REQUIRING 4 SUTURES.

THE EE WAS IN THE PROCESS OF ROOF BOLTING WHEN WRENCH BOLD-OUT & WRAPPED ACROSS HEAD RECEIVING 14 SUTURES & FRACTURING NOSE.

THE EMPLOYEE WAS IN THE PROCESS OF BOLTING TOP WHEN THE DRILL STEEL BENT AND CAME AROUND AND SMACKED HIM ON THE WRIST, LEFT HAND. REPORTED TO SAFETY OFFICE ON 8-2-01.

THE EMPLOYEE WAS OPERATING THE REMOTE CONTROL MINER WHEN A PIECE OF DRAW ROCK FELL STRIKING HIM ON THE RIGHT LEG.

THE EE WAS OPERATING A REMOTE MINER WHEN A PIECEOF SCALE FELL FROM BETWEEN BOLTS HITTING HIM ON BACK OF HEAD

THE EMPLOYEE ATTEMPTING TO FREE ROOF-BOLTER STUCK IN THE MUD WHEN BOLTER WAS FREED IT SLIPPED AND KNOCKED HIM TO THE GROUND.

EE WAS CHANGING SCREEN IN #2 PRE-WET VIBRATOR BY REMOVING RAIL WITH IMPACT WRENCH. THIS BROKE STRIKING HIS LEFT WRIST. HE RECEIVED 8 STITCHES.

THE EE WAS USING CUTTING TORCH ON METAL ON BELT DRIVE WHEN A PIECE OF METAL POPPED OFF & HIT IN LEFT EYE.

THE EMPLOYEE WAS IN PROCESS OF DRILLING HOLE WITH BUTTER FLY DRULL TO ANCHOR TAIL PIECE WHEN HANDLE ON DRILL HIT RIGHT KNEE CAUSING HIM TO PULL LIGAMENTS IN KNEE. THIS INJURY REPORTED TO ME ON 01-02-98.

THE EE WAS WORKING ON STOCKER CHUTE & GOT RIGHT KNEE TOO CLOSE TO FAN BLADES WHICH CAUSED A LACERATION TO KNEE WHICH REQURIED 6 STITCHES.

THE EMPLOYEE WAS BOLTING ROOF WHEN THE DRILL STEEL FELL OUT OF HOLE AND HIT RIGHT FOOT CONTUSIONG IT.

THE EMPLOYEE WAS IN THE PROCESS OF BOLTING TOP WHEN DRILL STEEL GOT HUNG AND WHEN IT FELL IT HIT HIS LEFT HAND AND CONTUSED IT. THE INJURY OCCURRED ON 002 SECTION 4TH RIGHT ENTRY.

EMPLOYEE WAS SPOT BOLTING TOP. WHEN LOWERING BOOM, WRENCH FELL STRIKING HIM IN LEFT SIDE, FRACTURING TWO RIBS.

THE EE WAS SPOT BOLTING NETURAL ROADWAY WHEN A ROOF BOLT THAT HAD BEEN LEANED UP AGAINST BOOM OFROOF BOLTER FELL STRIKING HIM ON THE RIGHT CHEEKBELOW EYE REQUIRING [9] STITCHES.

WAS REPAIRING A TRUCK BESIDE OF GRINDR MACHINE AND A METAL FLAKE FLEW INTO HIS EYE.

EMPLOYEE WAS CLEANING A PIPE FITTING WITH A BENCH GRINDER & HIS LEFT THUMB GOT CAUGHT ON THE WIRE BRUSH WHICH CAUSED A FX & LACERATION TO HIS LEFT THUMB

THE EMPLOYEE WAS IN THE PROCESS OF BOLTING TOP. HE HAD HOLE DRILLED AND HIS DRILL STEEL WAS FOULED. HE HAD LEFT HAND ON TOP OF STEEL AND RIGHT HAND ON BOTTOM. WHEN HE PULLED DOWN ON STEEL IT G AVE LOOSE. THE STEEL CAME DOWN IN A FAST MANNER AND CAUSED HIS LITTLE FINGER (PINKY) ON RIGHT HAND TO GET STRUCK BETWEEN DRILL STEEL AND WRENCH WHICH LAYED ON PINNER.

EE WAS TRAMMING THE ROOF BOLTER IN THE PROCESS OF CHANGING LOCATIONS IN ORDER TO PROCEED BOLTING IN NEW LOCATION EE REACHED TO GET ROOFER GLOVES OFF OF ROOF BOLTER & STEPPED TOO CLOSE CAUSING BOLTER TIRE TO TRAVEL OVER LEFT TOP PORTION OF FOOT (LEFT FOOT)

THE EMPLOYEE WAS TURNING ON AIR CONTIONER OF THE DOZER HE WAS OPERATING & A FLECK OF PAINT BLEW INTO THE EM0PLOYEES EYE

TWISTED LEFT KNEE WHILE WORKING IN CONTROL ROOM BY TURNING BODY AROUND QUICKLY.

WAS OPERATING THE LEE NORSE ROOF BOLTER WHEN THE BOTLER WRENCH SLIPPED AND HIT HIM OVER HIS LEFT EYE, RESULTING IN A CUT REQUIRING 9 STITHCES.

THE EMPLOYEE WAS ROOF BOLTING AND DIRT/ROCK GOT INTO EYE.

THE EMPLOYEE WAS BOTLING TOP WHEN A ROCK FELL, PUSHING EMPLOYEE INTO EQUIPMENT. THIS CAUSED PUNCTURE WOUND TO FACIAL AREA.

THE EMPLOYEE WAS PUTTING VIBRATOR FRAME BARS TOGETHER AND ANOTHER EMPLOYEE WAS WELDING FLASH BURNS GOT INTO FIRST EMPLOYEE'S EYES.

WHILE PINNING GOUGE TO TURN BREAK IN 2 ENTRY A PIECE OF DRAW ROCK 2 FT BY 3 FT AND FROM LINCH TO 4 INCHES THICK FELL FROM TOP WHEN HE STARTED TO SET ATRS TO SET A BOLT.

EMPLOYEE WAS OPERATING A D7 DOZER. BUILDING A HAUL ROAD ON LOWER PART OF HOLLOW FILL. AS HE WAS BANKING DOZER UP ROAD HIT A ROCK CAUSING THE DOZER TO JOLT AND THEN CAUSING INJURY TO BACK.

VICTIM WAS USING A HIGH PRESSURE GREASE GUN TO GREASE AN END LOADER. WHILE GREASING, A BOOM PIN THE GREASE SHOT OUT AROUND THE PIN AND HIT HIS RIGHT EYE.

WELDING RF B0LTER GOT FLASH BURNS TO BOTH EYES

THE EE WAS INSTALLING ROOF BOLTS AT THE FACE WHEN A PIECE OF SLATE FELL FROM THE ROOF AND HIT THE RIB. A PIECE OF THE ROCK BOUNCED OFF THE RIB AND HIT THE VICTIM ON THE LEFT CHEEK.