Buscar en el registro

EE & others were replacing the top belt on the #2 belt press. Takeup assembly was secured with a 3/4 ton chain come-a-long, both air regulators were backed off so as not to apply pressure & a stand with a 2"x12" steel pipe was holding the new belt. The air valve was opened & the takeup swung forward, broke the chain & the pipe struck the injured on left ear which required stitches.

INJURED WAS USING AN OVERHEAD HOIST AND A GRAB LIFT TO REMOVE A 2'X4'X1/2" STEELPLATE FROM THE STORAGE RACK. HE RAISED THE PLATE APPROX 5' FROM THE FLOOR AND WAS ATTEMPTING TO ROLL THE HOIST WHEN IT REFUSED TO MOVE. HE TRIED SEVERAL TIMES TO PULL THE HOIST WHEN THE PLATE FELL OUT OF THE GRAB, STRIKING AND FRACTURING HIS LOWER RIGHT LEG

INJURED AND SUPERVISOR WERE STANDING OUTBY THE CONTINUOUS MINER WATCHING COAL BEING LOADED INTOTHE COAL HAULER. A PIECE OF ROCK HAD FALLEN ONTOHEAD OF MINER. WHEN THE PIECE OF ROCK CAME BACK THE CONVEYOR CHAIN, IT FELL OFF AND STRUCK INJURED ABOVE THE RT. KNEE. SUPERVISOR HAD SEEN THE ROCK AND PULLED INJURED BACK.

INJURED EMPLOYEE STEPPED ON HOIST CABLE. OPERATOR ENGAGED HOIST CABLE JERKED SLAPPING BOTTOM OF HEEL.

EE HAD PUSHED THE BOLT STEEL UP TO THE MINE ROOFTO START DRILLING. THE STEEL DISLODGED A PIECE OF ROCK WHICH FELL HITTING HIM ON THE LEFT ARM NEAR THE WRIST. THE PIECE OF ROCK WAS 11/2 " THICK BY 10" HALF MOON PIECE3. IT KNOCKED HIS ARM INTOTHE BOLTER CAUSING A BREAK TO A SMALL BONE

EE WAS BOLTING IN XCUT BETWEEN NO.6 AND NO.7 ENTRY, A PIECE OF ROCK 2' X 4' X 3" THICK FELL OUT FROM BETWEEN THE BOLTS HITTING HIM ON RIGHT FOOT.

A PIECE OF ROCK FELL FROM MINE ROOF, STRIKING THE EMPLOYEE ON THE LEFT LEG DURING BOLTING OPERATIONS. THE ROCK WAS 5"X8"X3".

EE WAS DRILLING HOLE FOR RIB BOLT, WHEN A PIECE OF ROCK FELL HITTING HIM ON LEFT SHOULDER, KNOCKING HIM AGAINST CONTROL LEVERS ON BOLT MACHNE HURTING RIGHT ARM.

EMPLOYEE WAS DRILLING ROOF BOLT HOLE, WHEN A PIECE OF DRAW ROCK FELL HITTING HIM ON RIGHT SHOULDER. ROCK WAS 1"X14"X18.

EE SAID THAT HE HEARD THE RIB CRACK. HE PUT HIS HAND DOWN TO SHOVE HIMSELF AWAY. THE TOP OF THE RIB WHICH HAD ROCK ON IT FELL HITTING HIM ON THGE RIGHT HAND, HITTING LITTLE FINGER AND RING FIN GE. LITTLE FINGER WAS CUT OFF BETWEEN BACK OF NAIL AND FIRT KNUCKLE.

THE EE STATED THAT HE WAS REMOVING DRILL STEEL OUT OF ROOF WHEN A PORTION OF ROOF FELL AND STRUCK HIS LEFT FOREARM.

EE GOT HIS EYES BURNED AND IRRITATED FROM THE FLASH OF AN AIR ARC WELDER THAT A FELLOW EE WAS USING.

EE WAS HELPING WITH MINER CABLE WHEN THE MINER CABLE PULLED TIGHT, HIS LEFT LEG WAS IN BETWEEN CABLE AND THE COAL RIB. THIS EE DID NOT START MISSING WORK UNTIL 10-6-98.

WHILE THE EE WAS REACHING FOR HALF HEADER FROM THE BACK OF THE ROOF BOLTER, THE BOLTER RAISED UP AND PINNED THE EE BETWEEN THE TOP AND THE BOLTER.

STARTED TO BOLT #5 ENTRY A PIECE OF DRAW ROCK FELL HITTING LOWER BACK.

THE EE WAS PREPARING TO DRILL A HOLE ON LEFT RIB SIDE. AS HE STARTED TO DRILL A PIECE OF ROCK 3 1/2'X4' FELL PINNING HIM IN A KNEELING POSITION. THIS ROCK HAD TO BE LIFTED UP FOR THE EE TO BE PULLED OUT.

BOLTING TOP A PIECE OF ROCK FELL WHILE PUTTING UP BOLT HITTING MAN ON HEAD, NECK AND SHOULDER.

EE WAS HOOKING ROPE FROM MINER CABLE TO MINER WHEN LEFT TRAM DROPPED OUT ON MINER, CAUSING MINER TO SWING SIDEWAYS STRIKING EE KNOCKING HIM AGAINST RIB.

BOLTING TOP IN LOW COAL, AHD TO BEND BOLT TO GET IN HOLE, WHEN HE TRIED TO STRAIGHTEN BOLT BACK UP, HURT LOWER BACK. THIS REPORT WAS MADE KNOWN TO TEAYS BY EE 7-1-97.

EMP WAS STANDING BESIDE ROOF BOLT MACHINE MAKING UP BOLTS TO SET. OTHER OPERATOR MOVED THE ROOF BOLT MACHINE, PULLING IT UP, THE WHEEL RAN UP ON EMPS LEFT FOOT.

EMP WAS GOING DOWN THE LEFT RIB BEHIND A CURTAINAFTER A FLY BOARD. CONTINUOUS MINER WAS BEING SET OVER AND OPERATOR WAS NOT AWARE THAT AN EMP WAS BEHIND CURTAIN. WHEN OPERATOR TURNED MINER, BO OM HIT EMP AND KNOCKED HIM AGAINST RIB.

EE TURNED TO LEFT TO MOVE LEVER ON BOLTER AND KNEE JUMPED OUT OF PLACE.

EMPLOYEE WAS OPERATING LEFT SIDE OF FLETCHER BOLTE. A PIECE OF BOLT STEEL BROKE AND HIT HIM ON THE RIGHT SIDE OF HIS FACE.

EE WAS OPERATING A MINER. HE WAS TRAMMING INTO FACE, SWINGING THE MINERS AROUND, AND PINNED HIMSELF AGAINST THE RIB

A PIECE OF ROCK FELL OUT FROM BETWEEN THE RIB & THE LAST ROW OF BOLTS. THE PIECE OF ROCK SLID DOWN THE EE'S BACK HITTING HIM ON BACK OF LEG AT ANKLE. THE ROCK WAS 3" TO 4" THICK, 2' WIDE BY 3' LONG.

OPERATOR WAS PUTTING A POINT ANGLE BOLT TOGETHER WEN A PIECE OF ROCK 8X12X3 FELL, HITTING HIM ON THE FOREARM AND CUTTING ARM.

BENDING BOLT HURT LOWER BACK.

OPERATOR LET DRILL HEAD OF ROOF BOLT MACHINE DOWN ON LEG.

RUNNING PRESSURE WASH--HIT END OF HARD TOED SHOE, THE LEATHER SPLIT, LETTING HOT WATER IN ON LEFT FOOT, BUTNED LITTLE TOE AND ONE NEXT TO IT.

EMPLOYEE WAS MOVING BOLT MACHINE AND TWISTED LEFT KNEE.

OPERATOR WAS STARTING TO DRILL HOLE AND PUT STEEL AGAINST TOP, A SMALL PIECE OF ROCK BROKE LOOSE, DROPPING DOWN AND HITTIN GRING FINGER ON LEFT HAND.

OPERATOR WAS BOLTING TOP AND ROCK FELL BEHIND HIM, HITTING HIM IN THE LOWER BACK.

EE WAS SETTING FIRST BOLT ON RIB SIDE WHEN A PIECE OF DRAW ROCK BROKE LOOSE BETWEEN RIB AND BOLTER AND FELL ACROSS HIS BACK. LOCATION: BREAKTHRU BETWEEN NO. 4 AND NO. 5.

EMPLOYEE WAS TRYING TO UNCLOG ROCKDUSTING MACHINE WITH HIS LEFT HAND WHEN SOMEONE TURNED IT ON. HIS LEFT FINGERS WERE CUT IN AUGER MECHANISM OF THE MACHINE. LEFT THUMB LACERATION & DEFORMITY A LSO.

EMPLOYEE WAS MOVING CABLE AND GOT BETWEEN RIB AND BOOM OF MINER. LEFT EAR LACERATION. RIGHT SIDE OF HEAD CUT IN TWO PLACES.

EMPLOYEE WAS SETTING SECOND ROW OF BOLTS WHEN A PIECE OF ROCK ABOUT 4FTX4FTX3IN THICK FELL FROM RIB TO BOLT THE ROCK HIT THE EMPLOYEE IN THE NECK & SHOULDERS

FACE EMPLOYEE WAS SETTING A BOLT WHEN A ROCK FELL AROUND THE BOLT. HIS WRENCH SLIPPED ON THE BOLT, KNOCKING GLASES OFF, & A PIECE OF METAL WENT INTO HIS LEFT EYELID, PASSING INTO THE BONE JUST ABOVE THE LEFT EYEBALL. IT LODGED IN THE BONE.

EMPLOYEE WAS AT FACE OF #5 ENTRY. HE WAS STRAIGHTENING A BOLT AND STRAINED RIGHT SHOULDER AND NECK.

EE WAS BURNING WITH CARBON ARC AND SPARKS FROM CARBON ARC BURNT ARM. RIGHT FOREARM. A KERATOCHANTHOMA LATER DEVELOPED ON FOREARM. NO WORK TIME WAS LOST HOWEVER, SURGERY TO REMOVE TURMOR WAS DO ING ON 8-24-93.

EMPLOYEE WAS SHOVING BOLT INTO HOLE WITH HEAD OF BOLTER AND GOT FINGER CAUGHT BETWEEN BOLT AND BOLTED HEAD. RIGHT FOREFINGER.

AT NO 2 ENTRY EMPLOYEE WAS TRAMMING A CONTINUOUS MINER THROUGH A DROP CURTAIN WHICH WAS BLOCKING HIS VIEW HE RAN HIS HEAD INTO A HALF-HEADER AS HE WENT THROUGH & UNDER THE CURTAIN

FACE OF #3 ENTRY. DID NOT START MISSING WORK UNTIL 9/28/92. SURGERY PERFORMED ON 9/29/92. A ROCK (4" X 8" X 2" THICK) FELL, STRIKING EMPLOYEE ON LEFT KNEE, CAUSING A BLUNT INJURY TO THE KNEE.

BOLTER STEEL FELL OUT OF HOLE, HITTING HEAD OF BOLTER WHICH WAS IN ROTATION, AND THEN HIT EMPLOYEE ON LEFT EAR, CUTTING EAR. TAKENTO THE HOSPITAL FOR STITCHES.

EE WAS SPINNING BOLT STEEL UP INTO TOP AND GLOVE CAUGHT BETWEEN BOLT STEEL AND SPUN HIS HAND. HE WAS ABLE TO PULL HIS HAND FROM HIS GLOVE. HIS 2ND AND 3RD FINGERS OF HIS LEFT HAND WERE MASHED AND LACERATED REQUIRING STITCHES.

EE HAD JUST INSERTED BOLT STEEL IN HOLE IN ROOF. BOLT STEEL FELL OUT OF ROOF AND STRUCK HIS 2ND AND 3 RD FINGERS OF HIS LEFT HAND, WHICH WAS RESTING ON THE BOLT MACHINE. SECOND FINGER WAS FRAC TURED AND THIRD FINGER WAS BRUISED.

LEFT X-CUT #2 ENTRY. PIECE OF ROCK ABOUT 1" THICK, 2FT ROUND, FELL ON HAND. RIGHT HAND. NO LOST TIME.

A ROCK ABOUT 16" X 2" X 12" FELL ABOUT FIVE FOOT HITTING THIS EMPLOYEE ON HIS RIGHT SHOULDER. THE ROCK BROKE UP WHEN IT HIT HIM.

EMPLOYEE WAS CUTTIANG & WELDING IN THE SHOP HE IS NOT SURE WHEN THE METAL GOT IN HIS EYE HE DID NOT START MISSING WORK UNTIL 05-13-91

THIS EMPLOYEE WAS WORKING A SBOLT MACHINE HELPER. HE LAID HIS HAND ON THE ATRS. THE BOLTER OPERATOR RAISED THE ATRS AGAINST HE ROOF, CATCHING THE HELPER'S FINGER BETWEEN THE ATRS AND THE ROO F BURSTING THE SKIN OF THE MIDDLE FIGNER OF HIS LEFT HAND.

EMPLOYEE WAS PULLING STEEL OUT OF TOP. IT SEPARATED AND STRUCK RIGHT THUMB. TORN LIGAMENT.