Buscar en el registro

EE was changing drill steel. The up lever for the pod was activated instead of the down, pinching and cutting his left index finger.

EE was moving debris with drill pot, finger was pinched between feed jack and drill pot arm.

Employee was operating roof bolter when a hydraulic hose blew, spraying oil in his face (medical only).

Employee had his right hand on the drill pot while swinging the boom and accidently hit boom lift lever.

With the Fletcher drill pot raised, employee lowered the book resulting in wedging and bending back his middle finger on his right hand.

EE was operating the Roof Bolter on the off side. He moved the bolter arm into position and set his stabilizing jack. He then positioned himself to start bolting when he lowered the bolter pot onto his right leg.

While putting drill steel together in the process of drilling a test hole, a piece of rock fell striking the control lever causing drill pot to rise pushing drill steel into his left hand.

WHILE INSTALLING FLYBOARD HE WAS HOLDING BOTH STEELS AND MOVING POT BACK AND FORTH WHEN THE POT HIT A ROCK CAUSING THE TWO DRILL STEELS TO PINCH HIS FINGERS.

WHILE TRAMMING THE FLETCHER ROOF BOLTER, HE RAN OVER SOME UNEVEN BOTTOM CAUSING THE DECK TO RAISE AND CAUSING HIS HEAD TO BE ABLE TO COME IN CONTACT WITH THE MINE ROOF.

WHILE INSTALLING ROOF BOLT EE GOT FINGER CAUGHT BETWEEN MINE TOP & BOLTER HEAD (NOT SURE ON WHATPART OF BOLTER HEAD, POSSIBLY IT WAS THE BOLTER WRENCH).

WHILE HE WAS INSTALLING ROOF BOLT, HIS GLOVE GOTCAUGHT ON BOLT RESULTING IN SPRAIN & STRAIN OF HAND & FINGERS.

INJURED WAS HELPING LOOSEN A HUNG UP MINING MACHINE FROM MUD. HE WAS ATTEMPTING TO PLACE A CRIB BLOCK UNDER THE TREADS OF THE UNIT AND IT LUNGEDBEFORE HE COULD REMOVE HIS HAND. THE TRACKS CUT HIS RIGHT HAND. THE MINING UNIT ITSELF WAS NOT DAMAGED AND MUD COULD POSSIBLE BE A FACTOR. NO RULES OR SAFETY REGULATION VIOLATED BUT MORE AWARENESS FROM WORKERS COULD BE A FACTOR.

EE WAS INSTALLING A #5 REBAR 42" ROOFBOLT. WHILESTRAIGHTENING THE BOLT IN AN AWKWARD POSITION HEFELT SOMETHING IN HIS RIGHT SHOULDER POP.

INJURED WAS OPERATING A BELT CUTTER IN ORDER TO ACCOMPLISH MAKING SPLICE IN 36" BELT. WHILE PULLING ON THE UNIT HIS HAND SLIPPED AND FINGER SLID ACROSS THE BLADE. NO SAFETY RULES WERE VIOLATED AND MINE DOES NOT KNOW OF ANY SAFETY EQUIMENT THAT MIGHT HAVE PREVENTED THE ACCIDENT. THE INJURED DID NOT VIOLATE ANYTHING HE HAD RECEIVED IN TRAINING BUT HE COULD HAVE BEEN MORE ALERT TO AVO

EMPLOYEE WAS TRAMMING THE #2 BRIDGE AROUND CORNER AND HIS BRIDGE WAS PULLED TOWARDS THE RIB BY THE #3 BRIDGE OPERATOR, #2 BRIDGE JAMMED EMPLOYEE'S LEFT LEG INTO RIB.

DRAW ROCK FELL WHEN EMPLOYEE SET HIS ROOF SUPPORT JACK HITTING HIM ON THE RIGHT SHOULDER.

KETTLE BOTTOM/DRAW ROCK FELL BETWEEN T.R.S. AND CONTROL STATION WHILE HE WAS DRILLING HITTING EE ON HEAD, ARM AND HAND.

SEVERE LACERATION OF LITTLE FINGER ON RIGHT HAND. INJURED WAS OPERATING A ROOF BOLTER AND WHILE LOWERING THE DRILL POT HE HAND FINGR CAUGHT BETWEEN DRILL POT AND FRAME OF THE ROOF BOLTER.

INJ WAS USING A HYDRAULIC CHAIN SAW IN ORDER TO SHORTEN A POST TO SUPPORT THE ROOF OF THE MINE THE POST HAD A TENDENCY TO ROLL AS THE INJURED WAS SAWING. HE ATTEMPTED TO HOLD THE POST WITH O NE HAND, THE SAW KICKED AND UPON COMING BACK DOWN LANDED ON THE INJ'S LEFT INDEX FINGER

INJURED WAS CLEANING ROCK AND DEBRIS FROM TOP OF MOBILE BRIDGE UNIT. IN NOT PAYING CLOSE ATTENTION TO THE TASK HE THEN GOT HIS HAND CAUGHT BETWEEN THE UNIT AND THE TOP.

EE WAS ATTEMPTING TO DRILL HOLE IN ROOF TO INSERT RESIN AND ROOF BOLT. WHILE HOLDING THE DRIVER STEEL AND FINISHER STEEL TOGETHER HE TOOK HIS EYES OFF THE STEEL AND TURNED AROUND VISUALLY VIEW ED THE HAND CONTROLS. HE CONTINUED IN THIS FASHION WHILE OPERATING THE CONTROLS, THE STEEL BECAME SEPARATED AND HIS THUMB WAS THEN PINCHED BETWEEN THE TWO STEELS.

INJURED HAD RIGHT HAND ON DRILL POT OF BOLTER CHECKING FOR SUCTION. LOWERED POT AND MOVED LEVER WRONG WAY. POT RAISED AND CAUGHT RIGHT HAND BETWEEN DRILL POT AND ROOF.

INJURED WAS OPERATING ROOF BOLTER IN LOW COAL AND FELT NEED TO CHANGE POSITIONS. HE PLACED HIS LEFT HANDON GROUND AND WS GOING TO RAISE BODY UP AND MOVE BUT IN DOIING SO HE ALSO PLACED HIS RI GHT, TO GAIN LEVERAGE, ON THE BOLTER. HE WAS NOT CLOSE ENOUGH ATTENTION AND THE RIGHT HAND CAME TO REST ON THE CONTROLS OF THE BOLER AND THE DRILL POT WAS LOWERED ONTO HIS LEFT HAND.

EE WAS OPERATING A ROOF BOLTER AND INSTALLING ROOF BOLTS INTO THE TOP. HE ALLEGEDLY INJURED BACK WHILE BENDING A 48" NOTCHED ROOF BOLT TO MAKE READY FOR INSTALLATION. WE THE CO CONTEND THIS ST EMS BACK TO AN EARLIER INJURY OF JUNE 1993. THE CO FELT THAT THE 1993 INJURY WAS DONE AT HOME BUT HAD NO PROOF OF THIS.

INJURED WAS ATTEMPTING TO INSTALL A ROOF BOLT BETWEEN THE LAST ROW OF BOLTS AND THE ATRS OF THE ROOF BOLTER. A ROCK FELL FROM BETWEEN THE TWO, HITTING HIM ON THE HEAD AND BACK.

INJURED WAS OPERATING A DOUBLE BOOM ROOF BOLTING MACHINE & HAD JUST FINISHED INSTALLING A ROOF BOLT WHILE PREPARING FOR THE INSTALLATION OF ANOTHER BOLT HE RESTED HIS LEFT HAND ON THE BOOM OF THE BOLTER AT A PINCH POINT THIS IS A DIRECT VIOLATION OF RULES & WARNINGS & WHEN THE HEAD OF THE BOLTER WAS LOWERED HIS HAND WAS CAUGHT BETWEEN THE BOOM & HEAD OF THE ROOF BOLTER

INJURED WAS HELPING REGULAR ROOF BOLTING MAN TO INSTALL A ROOF BOLT. HOLE HAD ALREADY BEEN DRILLED AND INJURED AND FELLOW EMPLOYEE WAS ATTEMPTING TO FORCE A 48" BOLT INTO THE HOLE. A SLAB OF R OCK FELL FROM BETWEEN A PREVIOUSLY INSTALLED BOLT AND CURRENT HOLE, STRIKING INJURED ON HEAD, SHOULDER AND BACK.

WHILE ATTEMPTING TO INSTALL A 48IN ROOF BOLT AFTER DRILLING HOLE & INSTALLING RESIN GLUE THE INJURED WAS USING HEAD OF BOLTER TO LIFT A BENDED BOLT INTO THE HOLE THE BOLT SLIPPED OFF THE HEAD & SWUNG HITTING INJURED IN RT JAW

INJURED WAS GRINDING ON TRAY FOR J.H. FLETCHER BOLTER IN SHOP ON SURFACE HE WAS WEARING A FACE SHIELD AND SMALL PIECE OF METAL FLEW UNDER THE SHIELD AND BECAME IMBEDDED IN INJURED S RIGHT EYE.

INJURED WAS POURING HYDRAULIC OIL INTO BRIDGE THAT WAS BEING REBUILT IN SUPPLY YARD, WHILE WELDING WAS BEING DONE ON OPPOSITE END, APPROX. 38 TO 40 FT AWAY. INJURED SAID HE KEPT GLANCING AT WELDING WHILE ACHIEVING THE COMPLETION OF THE ABOVE JOB.

INJURED WAS BOLTING THE TOP WITH A FLETCHER DDO-13 TWIN BOOM ROOF BOLTER. AFTER INSTALLING A BOLT IN THE TOP OR ROOF A PIECE OF CAOL AND ROCK FELL FROM AROUND THE BOLT AND STRUCK INJURED IN TH E SIDE OF THE HEAD OR FACE AND ALSO CONTINUED DOWN STRIKING HIM ON BACK OF LEFT SHOULDER AND FOREARM.

INJURED WAS OPERATING A FLETCHER DDO13 TWIN BOOM ROOF BOLTER AND PIECE OF CAP COAL FELL FROM ROOF AND HIT HIM ON RIGHT SHOULDER.

INJURED WAS OPERATING A ROOF BOLTER AND DRILL STEEL REMAINED STRUCK IN DRILL HOLE. INJURED TRIED TO EXTRACT BY PULLING AND STEEL REMAINED STUCK. AFTER TURNING AWAY FROM DRILL HOLE INJURED LAYE D HAND ON MACHINE AND STEEL THEN FELL FROM HOLE AND LANDED ON HIS HAND.

INJURED WAS TRYING TO PIN KETTLE BOTTOM A PIECE OF ROCK FELL FROM TOP PINNING THE INJURED'S HAND AND FOREARM BETWEEN THE HEAD OF THE BOLTING MACHINE AND THE KETTLE BOTTOM ITSELF.

INJURED WAS OPERATING ROOF BOLTER & RESTED LEFT HAND ON TOP OF ROOF PLATE TO ACT AS A GUIDE BOLTER RAISED ROOF BOLT & PLATE CASTER THAN ANTICIPATED THUS PINNING FINGERS BETWEEN T OP & ROOF PLA TE

GRINDING ON HEAD SWING JACK OF MINER IN ORDER TO REPAIR METAL GOT IMBEDDED IN EYE EVEN THOUGH INJURED WAS WEARING SAFETY GLASSES.

INJURED WAS INSTALLING ROOF BOLTS AND HAND WAS CAUGHT BETWEEN DRILL HEAD AND ROOF.

WHILE CUTTING A CONNECTING LOOSE FROM SCOOP A PIECE OF METAL SLAG FELL FROM CUTTING SURFACE ONTO CONCRETE FLOOR. SLAG BOUNCED FROM CONCRETE AND INTO EAR.

DRILL STEEL STUCK INTO ROOF. EMPLOYEE LAID HANDS ON BOLTER (DRILL POT) WHILE LEANING AND LOOKING FOR STEEL. THE STEEL THEN RELEASED FROM ROOF AND FELL ON INJURED'S HAND OR FINGER.

INJURED WAS INSTALLING BOLTS. ROOF BOLT STALLED AND GLUE HAD SET UP. INJURED WAS ATTEMPTING TO BEND BOLT AND PLATE CLOSER TO ROOF. WRENCH SLIPPED OFF AND HAND HIT INTO THE ROOF.