Buscar en el registro

SETTING IN BOLTER OPERATORS COMPARTMENT BACKING ROOF BOLTER OUT OF A CUT HAD LEFT HAND ON EDGE OF CANOPY AND HIT THE RIB. SEVERING FINGER.

INSERTING 6'RESIN BOLT, HOLDING BEARING PLATE TOGUIDE IT AWAY FROM AN EXISTING BENT BEARING PLATE, FINGER CAUGHT BETWEEN PLATES.

KNEELING DOWN WITH BACK TO BOLTING MACHINE, HANGING LINE CURTAIN, BOLTS TRAMMED FORWARD, RUNNING OVER LEFT FOOT. COMPLIANCE NOT A FACTOR, AWARENESS A FACTOR.

WHILE BACKING THE ROOF DRILL THE REAR TIRE RAN OVER A ROCK CAUSING THE FRONT OF THE MACHINE TO RAISE & MOVED SIDEWASY PINCHING FOOT BETWEEN THE FRAME & FLOOR COMPLIANCE NOT A FACTOR, SYSTM ES NOT A FACTOR FAILURE TO ASSURE CLEAN PATH OF TRAVEL A POSSIBLE FACTOR

WHILE ADVANCING BOLTER INTO A CERT A PIECE OF ROOF ROCK FELL FROM BETWEEN BOLTS & STRUCK EE ON BACK OF NECK. COMPLIANCE NOT A FACTOR, RULES & REGS NOT A FACTOR. FAILURE TO OBSERVE ROOF CONDT

IN THE PROCESS OF CLEANING COAL FINES OUT OF THE DRILL CHUCK, A PIECE OF ROOF ROCK APPROX. 1'X1'X2" FELL AND STRUCK INDEX FINGER OF RIGHT HAND. COMPLORANCE WITH RULES, SEG NOT A FACTOR. AWARNE SS OF SURROUNDINGS, ROOF CONDITION A FACTOR.

DRILL STEEL FELL OUT OF HOLE, CAUGHT FINGER AGAINST DRILL HEAD. CAUSE - INATTENTION TO ACTIVITY - AWARENESS.

IN PROCESS OF DRILLING BOLT HOLE-HOLDING STARTER AUGER REACHED FOR LEVER TO LOWER DRILL HEAD-INAQANERTENTLY ACTUATED THR UP LEVER AND PINCHED RIGHT HAND BETWEEN DRILL HEAD AND ROOF.

INJURED WAS IN A KNEELING POSITION WHILE TRAMMING THE MINER BACKWARDS, HE TURNED HIS HEAD TO LOOK AT APPROACHING SHUTTLE CAR AND INADVERTENTLY PINCHED HIMSELF BETWEEN MINER & RIGHT RIB.

WHILE BOLTING, DRILL STEEL BECAME LODGED IN HOLE. HE LOOKED UP AND DRILL STEEL FELL OUT STRIKING HIM IN UPPER LIP.

WHILE INSTALLING A ROOF BOLT, ATTEMPTING TO POSITION BOLT PLAT AGAINST UNEVEN ROOF. HE WAS KNEELING ON FALL ROOF COAL, KNEE SLIPPED, CONTACTED FOOT FEED LEVER & PINCHED FINGER BETWEEN ROOF & B OLT PLATE.

WHILE DRILLING BOLT HOLE AND DIRLL HEAD NEAR TOP (UP), HE WAS HOLDING THE EXTENSION STEEL TO BE ADDED. HE LOST HIS BALANCE CAUSING HIS FOOT AND ARM TO MOVE FORWARD HE REACHED OUT FOR SUPPORT AND INADE. GRABBED THE DOWN LEVER, THE DRILL HEAD CAME DOWN AND CAUSED THE DRILL STEEL TO BE PUSHED THROUGH HIS FOOT.

WHILE BOLTING, A PIECE OF ROOF ROCK 3' X 3' X 0-24" THICK FELL FROM BETWEEN BOLTS AND STRUCK HIM ON THE RIGHT LEG/ANKLE.

WHILE ATTEMPTING TO EXTRACT A BENT 6' BOLT, THE BOLT SLIPPED BACK INTO THE CHUCK HE PUSHED THE WRONG LEVER WHICH CAUSED THE BOLT TO BEGIN ROTATING & THE BOLT STRUCK HIS RIGHT WRSIT

INJURED WAS USING A CUTTING TORCH TO CUT A BEARING RACE OFF OF THE HEAD ROLLER SHAFT WHICH WAS LIFTED UP AND SUPPORTED WITH A WISE ROPE CAME ALONG WHILE CUTTING THE RACE HE ACCIDENTLY CUT THRO UGHT THE COME ALONG ROPE WHICH ALLOWED THE HEAD ROLLER TO FALL, CRUSHING THE TIP OF HIS LEFT MIDDLE FINGER AGAINST THE HAD FRAME.

OPENED DUST BOX DOORS ON THE BOLTER TO CLEAN BOXES. SECOND BOLTER ASKED IF DOOR WAS OPEN AND UNDERSTOOD THAT IT WAS NOT. LEVER TO OPEN DOOR WAS PUSHED THE SECOND TIME. THE DOOR CLOSED CATCHING ARM BETWEEN DOOR AND LID.

EE WAS USING A 4 1/2 GRINDER TO CLEAN METAL PRIOR TO WELDING. WHEN REMOVING THE GRINDER, IT TWISTED LETTING THE STONE HIT FINGER.

SOMETIME DURING SHIFT, EMP HAD A PIECE OF METAL LODGED IN LEFT EYE. THOUGHT HE HAD WELDERS FLASHBUT IT DIDN'T GO AWAY. WENT TO EYE DR.

EE PLACED HIS RIGHT FOOT ON THE DUSTER TO STOP IT TO PUT BELTS ON, WHEN HIS FOOT SLIPPED AND WENT INTO BELT.

EMPLOYEE WAS OPERATING THE RIGHT SIDE OF THE FLETCHER TWIN BOOM BOLTER WHEN HE DROPPED THE DRIL HEAD ON HIS RIGHT FOOT, FRACTURING HIS FOOT.

EE WAS OPERATING THE ROOF BOLTER BY SWINGING THE BOOM. HIS HAND WAS LAYING ON THE BOLTER CHUCK. A PIECE OF SANDSTONE FELL STRIKING HIS HAND.

THE INJURED WAS RELIEVING THE BOLTER OPERATORS FOR LUNCH AND WAS MEASURING FOR THE BOLT ALONG THE RIB.AS HE SWUNG THE DRILL HEAD OVER TO THE BOLT,THE BOLT LODGED BETWEEN THE DRILL HEAD AND RIB .IT SNAPPED STRIKING THE INJURED IN THE MOUTH.

EE WAS ASSISTING THE MINER OPERATOR IN MOVING THE CONTINUOUS MINER FROM ONE ENTRY TO ANOTHER. AS THE MINER WAS BACKING UP, THE TRAILING CABLE WENT UNDER THE GATHERING HEAD OF THE CONTINUOUS MI NER. EE TRIED TO PULL THE CABLE FREE BY USING HIS FOOT. THE GATHERING HEAD CAME DOWN ON HIS FOOT AND SQUEEZED HIS FOOT AGAINST THE MINER FLOOR.

WHILE INSTALLING ROOF BOLT, A PIECE OF STONE MESURIGN 2'X3'X3' FELL STRIKING THE EMPLOYEE ONT HE RIGHT SHOULDER AND CHEST.

WORKED USING TORCH TO SHORTEN A COLUMN .CUT OFF PIECE TWISTED OR CUT AND LANDED ON RIGHT FOOT 1/2" BEHIND SAFETY TOE.

EE WAS OPERATING THE FLETCHER BOLTER WHEN A PIECE OF SANDSTONE FELL STRIKING HIM ABOVE THE LEFT EYE CAUSING A LACERATION.

EMPL. WAS OPERATING A REMOTE CONTROLLED CONTINUOUS MINER. HE HAD BACKED THE MINER OUT FROM THE LEFT SIDE OF THE FACE CUT & HAD STARTED TO CLEAN UP THE RIGHT SIDE MACHINE SWUNG TOWARD RIGHT RIB PINNING HIM.

WEARING SAFETY GLASSES AND PROTECTIVE HOOD- GRINDING, PIECE OF MATERIAL GLANCED OFF AND WENT BELOW SAFETY GLASS UNDER PROTECTIVE HOOD.

BUMPED RT ELBOW ON RF BOLTER

A BOLTER OPERATOR DRILLED A HOLE INTO THE ROOF WITH A STARTING AUGER, WHEN HE TRIED TO PUT THE EXTENSION ON TO FINISH THE HOLE, IT WOULD NOT FIT DUE TO LOOSE COAL UNDER THE DRILL HEAD. HE TRIE D TO LEVEL THE LOOSE COAL WITH THE DRILL HEAD WITH THE EXTENSION IN THE DRILL CHUCK AND THE STARTER STILL IN THE ROOF. WHEN HE MOVED THE DRILL HEAD HE CAUGHT HIS HAND BETWEEN THE TWO DRILL ST

EMPL WAS CLEANING PAIN GUN NOZZLE WHEN PAIN ACCIDENTALLY ENETERED FINGER TIP.