Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.
Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.
WHILE CUTTING A PIECE OF WOOD ON A TABLE SAW, THE INJURED ACCIDENTALLY CUT THE TIPS OF HIS MIDDLE AND RING FINGERS ON HIS LEFT HAND.
EE WAS IN THE PROCESS OF INSTALLING A ROOF BOLT WITH A ROOF BOLT MACHINE IN THE FACE OF NO. 5 ENTRY IN THE 4 SOUTH SECTION. WHILE INSTALLING A ROOF BOLT THROUGH A STEEL STRAP, A PIECE OF ROCK, 5'X2'X5" THICK FELL, PARTIALLY STRIKING HIM ON THE HEAD AND NECK.
INJURED WAS IN THE PROCESS OF TRAMMING A ROOF BOLTING MACHINE FROM THE OPERATORS COMPARTMENT. DURING THIS PROCESS, THE EE DANGLED HIS FOOT OUTSIDE OF THE COMPARTMENT ND GOT IT SQUEEZED BETWEEN THE MACHINE AND A LARGE PIECE OF SLATE.
THE INJURED WAS CHANGING A EHV MOTOR ON A SHIELD SUPPORT. AFTER REMOVING THE SCREWS ON THE MOTOR. HE TURNED THE WATER PRESSURE TO THE SHIELD SLOWLY, SO THE MOTOR WOULD DISLODGE. THERE WAS NO P RESSURE BECAUSE THE MAINGATE PUMPS WERE OFF HE FORGOT TO CLOSE THE PRESSURE VALVE OFF AGAIN. A LITTLE WHILE LATER THE PUMPS WERE TURNED ON. THE MOTOR FLEW OFF THE SHIELD STRIKING HIM ON THE B
EE WAS OPERATING A REMOTE CONTROL MINER IN #2 ENTRY OF THE 6 RIGHT SECTION OFF 4 SOUTH. AS HE BACK THE MINER FROM THE RIGHT SIDE OF THE FACE TO FINISH CLEANING UP THE LEFT SIDE, A PIECE OF SLA TE ROLLED FROM HIGH ON THE RIB COAL AND PUSHED THE EE UP AGAINST A WHEEL OF A RAMCAR WHICH WAS WAITING TO BE LOADED.
EE WAS ROOF BOLTING WITH A ROTARY DRILL IN THE 5 RT. SECTION ENTRY OF THE LW CONNECTOR ENTRY STATION 4+80. THE AREA IS DRY WITH DAMP BOTTOM AND 90" HIGH. WHEN REMOVING HIS DRILL STEELS FROM A FRESHLY DRILLED HOLE, HE PULLY ONLY 1 STEEL OUT.THE OTHER ONE STUCK IN THE HOLE BUT THEN FELL OUT AND LANDED ON HIS LT. HAND.
EMPLOYEE WAS ROOF BOLTING IN THE FACE OF THE FOUR SOUTH SECTION UNDER NORMAL DRY CONDITIONS. WITH A DRILL STEEL HANGING FROM THE HOLE IN THE MINE ROOF EMPLOYEE DECIDED TO CLEAN OUT HIS DRILL H EAD CHUCK. AS HE WAS CLEANING IT OUT THE DRILL SSTEEL FELL FROM THE HOLE AND STRUCK HIM ON THE TOP OF HIS LEFT HAND.
EMPLOYEE WAS ROOF BOLTING ON THE 5RT SECTION AT THE FACE, WHEN A PIECE OF RIB BROKE OFF AND ROLLED ONTO HIS FOOT. (8" X 3').
EMPLOYEE WAS USING A JACK HAMMER TO DRILL HOLES IN THE MINE FLOOR FOR BOLTS TO ANCHOR CONVEYOR BELT TRANSFER BASE IN THE PROCESS THE DRILL STEEL STUCK IN THE HOLE & THE EMPLOYEE TRIEDPULLING I T OUT WHEN HE FELT PAIN IN HIS LOWER BACK IT OCCURRED AT #5 TRANSFER WHERE IT IS HIGH & MUDDY NOTE: BEGAN MISSING WORK 06-13-95
IN THE #27 RM. OFF #6 ENTRY OF 4 SOUTH SECTION. THE MACHINE OPERATOR (VICTIM) WAS CUTTING ROCK BOTTOM WITH THE CONTINUOUS MINER, WHEN A PIECE OF ROCK (1"X2") FLEW FROM THE BITS AND STRUCK EE O N HEAD.
EMPLOYEE WAS BEGINNING TO WELD WITH AN ELECTRIC WELDER. HE STRUCK THE WELD ROD TO THE METAL PREMATURELY WITH OUT HIS HOOD DOWN. HE THOUGHT HE SUSTAINED FLASH BURNS TO THE EYE BUT LATER A PIECE OF METAL WAS FOUND. HE DID NOT MISS WORK AT FIRST. EMPLOYEE BEGAN MISSING WORK 2-2-95.
EMPLOYEE WAS DRILLING HOLES IN THE MINE FLOOR WITH A PNEUMATIC DRILL. INJURED WAS STANDING CLOSE BY, WHEN AIR SHOT OUT FROM THE EXHAUST. INJURED JERKED AWAY AND HIT HIS FOREHEAD JUST ABOVE RIG HT EYE ON METAL STANDARD ON BELT CONVEYOR FEEDER
EMPLOYEE WAS OPERATING A CONTINUOUS MINER CUTTING DOWN MINE ROOF THAT WAS PREVIUOSLY BOLTED FOR THE PURPOSE OF BUILDING AN OVERCAST A ROOF BOLT CAME UP THE CONVEYOR OF THE MACHINE SWUNG AROUND & STRUCK EMPLOYEE ON BACK OF HEAD
THE INJURED WAS ASSISTING ANOTHER EE INSTALL ROOF BOLTS WITH A HAND HELD AIR DRILL. WHILE ATTEMPTING TO PRESSURIZE THE DRILL AGAINST THE ROOF, THE DRILL STEEL BROKE AND STRUCK THE INJURED ON B OTH HANDS. THE INJURED SUSTAINED A LACERATION ONHIS RT THUMB AND A BROKEN MIDDLE FINGER ON HIS LEFT HAND.
EMPLOYEE WAS INSTALLING A ROOF BOLT INTO THE HOLE IN THE MINE ROOF BY RAISING THE DRILLING HEAD OF THE MACHINE AND GUIDING THE BOLT WITH HIS HAND. DOING SO HE FAILED TO LET GO OF THE BOLT AND THUS CAUGHT HIS HAND BETWEEN THE BOLT CONNECTOR & ROOF.
EMPLOYEE WAS ROOF BOLTING WITH A FLETCHER ROOF BOLTER WHEN HE GOT HIS FINGER CAUGHT IN THE GUIDE CLAMP FOR HOLDING THE DRILL STEEL. HE INADVERTENTLY HIT THE CONTROL VALVE WHILE HIS HAND WAS ON THE DRILL STEEL.
A RATCHET WRENCH HANDLE BECAME STUCK IN THE LONGWALL SHEARER HAULAGE CHAIN DURING SOME REPRS TO THE DYNA-TRACK CHAIN GUIDE. THE INJURED INSTRUCT3ED THE SHEARER OPERATOR TO TRAM THE SHEARER TO RELIEVE TENTION ON THE CHAIN. WHEN THIS WAS DONETHE RATCHET HANDLE FLEW OUT & STRUCK THE INJURED ON THE LEFT SIDE OF HIS FACE.
THE INJURED WAS ASSISTING ANOTHER EMPLOYEE INSTALL A ROOF BOLT WITH A HAND HELD COBRA DRILL. THEY HAD SET THE BASE OF THE DRILL ON A CRIB BLOCK AND STUCK THE INJURED ON THE RT. LEG ABOVE THE F OOT CASUING A DEEP LACARATION.
EMPLOYEE WAS ROOF BOLTING A CUT, WHEN HE CLOSED THE DRILL STEEL CLAMP CATCHING HIS LEFT INDEX FINGER.
EE WAS WORKING ON THE LONGWALL WHEN A PIECE OF SLATE FELL FROM BETWEEN THE SHIELDS STRIKING HIM ON THE RIGHT HAND CAUSING A LACERATION TO HIS RT MIDDLE FINGER WHICH REQUIRED STITCHES.
EMPL STANDING NEXT TO A CRIB WATCHING A WIRE ROPE BEING USED TO PULL CABLE IN LONGWALL SECTION WHEN THE WIRE ROPE BROKE. WAS STRUCK IN THE HEAD BY SOMETHING. DIDNT KNOW WHAT STRUCK HIM, RECD LACERATION ABOVE RIGHT EYE AND ON SCALP REQUIRING A TOTAL OF 5 STITCHES.
WHILE INSTALLING TRUSS BOLTS THE INJURED LAID THE LONG TRUSO ROD ACROSS THE BOLTING MACHINE WHILE HE DRILLED HIS HOLD A PIECE OF ROCK FELL FROM THE ROOF FROM BETWEEN BOLTS ON THE SIDE OPPOSITE HIM & STRUCK THE END OF THE TRUSO ROD STRICKINGOVER THE BOLTER THE END OF THE TRUSS BOLT WHERE HE WAS WORKING FLEW UP & HIT HIM UNDER THE CHIN
PULLING DRILL STEEL EXPER PAIN IN L ELBOW
EMPLOYEE WAS HANDLING A ROCK DUST HOSE WHEN IT BLEW APART INJURING THE EMPLOYEE'S RT THUMB. THE EMPLOYEE CONTINUED WORKING HIS NORMAL JOB UNTIL 2/25/92 WHEN IT WAS DETERMINED BY X-RAY THAT HE HAD FRACTURED HIS THUMB.
EMPLOYEE WAS BEGINNING TO SAW A POST WHEN THE SAW STRUCK HIS FINGER CAUSING A LACERATION TO HIS LEFT INDEX FINGER, REQUIRING 7 STITCHES.
THE INJURED JUST BEGAN DRILLING A BOLT HOLE AND APPARENTLY APPLIED TO MUCH PRESSURE ON THE FEED CONGROL. THE DRILL STEEL BROKE WHILE HE WAS HOLDING IT. THE INJURED SUSTANIEND A LACERATED AND B ROKEN INDEX FINGERON HIS LEFT HAND.