Buscar en el registro

SLIPPED ON FINE CONE CRUSHER AND HIT MY LEG ON IT.

WAS WSAHING MATERIAL FROM AROUND CRUSHER MOTOR AND SLIPPED AND FELL 6 FT ONTO CONVEYER BELT.

WHILE STOCKING STONE IN VOLVO HAUL TRUCK, EE STEPPED OUT OF TRUCK AND SLIPPED ON STONE THAT WAS ON THE GROUND. HE LOST BALANCE AND FELL, HITTING KNEECAP AGAINST STEEL I BEAM THAT SUPPORTS THE PLANT.

VIBRATOR ON #8 LIME BIN BROKE LOOSE AND FELL OFFOF THE BIN. WE HAD JUST FINISHED SECURING THE VIBRATOR BACK ONTO THE BIN. THE POWER SOURCE WAS UNLOCKED AND THE VIBRATOR WAS TRIED. IT DID NOT W ORK. WE LOCKED THE POWER BACK OUT AND WENT UP TODETERMINE WHY IT DIDN'T WORK. EMPLOYEE WENT TO THE MAINTENANCE TRUCK FOR A SOCKET AND THEN STARTED UP TO BIN. HE SLIPPED AND FELL.

EE WAS WORKING ON CLEANUP AROUND PLANT. HE WALKED AROUND THE NORTH SIDE OF THE OLD PLANT CONTROLBLDG & SLIPPED ON SOME ICE. HE FELL & LANDED ON THE GROUND INJURING HIS BACK

WALKING UP STEPS TO HELP TIGHTEN BOLTS ON CRUSHER TRIPPED ON STEPS DROPPED WRENCH. WRENCH BOUNCED ON STEP STRIKING LEFT EYEBROW.

AFTER FUELING EQUIPMENT EE SLIPPED OFF THE 980 CAT END LOADER HITTING ELBOW ON LOADER PLATFORM THEN CATCHING HIMSELF FROM FALLING ALL THE WAY DOWN WITH THE SAME ARM.

THE EMPLOYEE WAS STEPPING DOWN OFF OF A CONVEYOR THAT WAS APPROX. 4 FT OFF THE GROUND AND LOST HIS FOOTING AND FELL OFF THE CONVEYOR. THE CONVEYOR WAS DE-ENERGIZED DURING THIS ACCIDENT. THE CO NVEYOR HE WAS ON HAD NO CATWALK AND WAS NOT MEANT TO BE A WALKWAY. AN ESTABLISHED LADDER WAS IN PLACE WHERE HE WAS WORKING AND HE CHOSE TO TAKE A SHORTER ROUTE.

WHILE HOISTING SECO PAN FEEDER INTO PLACE IN TUNNEL, CHAIN SLIPPED CAUSING EE TO LOOSE BALANCE. EE REACHED FOR A HAND HOLD PUTTING ENTIRE WEIGHT ON SHOULDER.

EE WAS PICKING MUD FROM MATERIAL COMING UP NO1 FOOD CONVEYOR WHEN HE SLIPPED AND TWISTED HIS BACK.

CHECKING ANTIFREEZE IN RADIATOR ON P & H CRANE. EE GOT ANTI FREEZE ON BOTTOM OF HIS BOOTS, SLIPPED AND FELL HITTING HIS LEFT LEG ON THE OUTRIGGER OF THE CRANE.

OPERATOR LOST HIS FOOTING WHILE EXITING CRAINE.

ALL POWER WAS DISCONNECTED. EMPLOYEE'S, BOTH MECHANICS, WERE REMOVING STEEL BEAMS FROM AROUND THE JAW CRUSHER SO THAT A CRANE COULD LIFT THE CRUSHER OFF THE PLANT THE FOLLOWING MORNING. AFTER CUTTING AN I BEAM LOOSE WITH A TORCH, INJURED TRIED TO ROLL THE BEAM OVER. THE BEAM FLIPPED UP &STRUCK HIM, THROWING HIM OFF BALANCE CAUSING HIMTO FALL. HE HAD CUT HEAD AND BRUISED LOWER BACK.

EE WAS ON JAW DISCHARGE BELT LOOKING FOR A PIECE OF METAL THAT WAS SEEN GOING INTO THE JAW CRUSHER. HE JUMPED DOWN OFF THE BELT ONTO THE CATWALK. WHEN HE LANDED ON THE CATWALK HE TWISTED HIS K NEE. THE BELT WAS SHUT OFF. THE DROP FROM THE BELT TO THE CATWALK IS 5'.

CLIMB LADDER TO CHECK JAW LADDER SID AND MAN FELL.

STEPPED OFF TRACTOR TWISTED ANKLE.

WHILE WALKING FROM FOREMAN'S OFFICE TO SCAL HOUSE STEPPED OFF BERM OF ASPHALT AND FELL.

EMPLOYEE WAS CLIMBING DOWN FROM THE LEFT IN THE OIL SHED WHEN HE SLIPPED OR TRIPPED AND FELL, PULLING A MUSCLE IN HIS NECK.

DRIVER WAS DOING MAINTENANCE ON TRUCK WHEN HE SLIPPED OFF THE BUMPER OF THE TRUCK AND FELL AGAINST THE TOP OF RADIATOR OF TRUCK, HITTING HIS CHEST ON THE LEFT SIDE, CAUSING HIM TO RECEIVE A BR UISE TO HIS CHEST.

MAN WAS TIGHTENING BOLTS ON PLANT TRANSFER TOWERICE ON STEEL, MANS FOOT SLIPPED. FELL TO GROUND 12'.

ADJUSTING CRUSHER, TOOK A BREAK, LEANED AGAINST CAT WALK. RAIL GAVE WAY AND FELL.

THE EMPLOYEE TWISTED HIS RIGHT ANKLE AS HE WALKED OVER TO WASH OUT LOADER BUCKET.

LOADING BARRIER WALL ON TRAILER. STEPPED OFF BACK OF TRAILER & FELL.

WELDING MOVED FORWARD AND TRIPPED ON WATER HOSE HITTING HEAD ON WATER PIPE.

EMPLOYEE WENT TO CLIMB UP IN BODY SECTION OF RRK #187, HE PLACED HIS FOOT IN THE STEP & THE OTHER FOOT ON TRK BODY FLOOR-WHEN HE WENT TO FULLY STAND UP HIS FOOT SLIPPED & HE FELL LANDING ON LE FT LOWER LEG. THERE IMMEDIATELY APPEARED A LARGE KNOT UNDER SKIN. THE KNOT WAS APPROX SIZE OF ORANGE. HAD X-RAY & RETURNED TO WORK.

HE WAS WELDING ON BARGE. HE WAS STANDING INSIDE 12' ALUM BOAT. ROPE BROKE AND HE LOST HIS BALANCE. HIS LEFT SHOULDER HIT SIDE OF BOAT AND DISLOCATED.

HE WAS REPAIRING INSIDE OF HOPPER. HIS FOOT SLIPPED AND THE WEIGHT OF HIS BODY FELL AGAINST HIS LEFT HAND AND DISLOCATED HIS LEFT THUMB.

WORKING ON PUMP ON DREDGE WHEN HOIST BEAM MOVED HE FELL BEAM HIT ON HEAD

SLIPPED OFF OF THE CRANE WHILE ENTERING IT & HITHIS SIDE ON THE EDGE OF THE HOUSE & BROKE HIS RIB

EXITING SHOVEL USED TO LOAD SHOT ROCK & SLIPPED LANDING ON LARGE SHOT ROCK

WAS GETTING OUT OF LOADER AND TWISTED LOWER BACK.

WORK PLATFORM BROKE AND HE FELL 10'TO GROUND.

SLIPPED ON CRANE PULLING ON CABLES

ROLLED A SECTION OF CATWALK THAT WAS LYING ON THE GROUND OVER AND SLIPPED WHILE DOING THIS. WEIGHT OF CATWALK WAS APPROX. 200 LBS.

TURNED ANKLE OU7SIDE OFFICE AND FELL, LANDING ON RIGHT HIP. THIS WAS ON LEVEL GROUND WITH NO OBSTRUCTIONS.

JUMPED OFF TRACK ON MORTHWEST MODEL #95 DRAGLINE DOWN APPROX 2 1/2\ TO 3\ LANDING ON LEFT FOOT WRONG CAUSING INJURY TO LEFT ANKLE